They are all set to AUTO / default and the memory was on the manufactures recommended list.
DRAM Frequency - DDR-2133 (1:8) and there is another setting that says JEDEC #1 2133 MHz, JDEC #2 1866 MHz and JDEC #3 1600 Mhz
Voltage is 1.20 V
Good values, but it may be an option to think of changing the settings from auto. It sometimes happens that the setting 'auto' changes a few things what causes problems.
While we're busy with it, please check also the timings.
Attachment 53432
These are the settings that it shows... What do you recommend I change them to?
Interface CRC Error count are caused by communication errors between the drive and the host (southbridge) and typically involve an issue with the drive, SATA cable or the motherboard. These errors aren't generally something to worry about in terms of an absolute count as errors may have occurred on day 1 and never re-occurred. You should worry when it occasionally increases.
Well it seems to only blue screen when booting up... and it happened on Day 1, before anything was installed... (I thought it blue screened due to it missing drivers at first). What would you recommend my next step be?
Please see attached for the results of the Intel Burn Test...
What do you suggest trying next? Like I said it only seems to crash when I boot into windows.
Quote