Windows 10: BSOD everytime

Page 6 of 10 FirstFirst ... 45678 ... LastLast
  1.    17 Dec 2015 #51

    So I never changed anything for overclock settings but I'll quickly just tell what each is set to.

    Cpu ratio: auto
    Adjusted cpu frequency 3500Mhz

    Ring ratio: auto
    Adjusted ring frequency 390Mhz

    Cpu base clock MHZ: 100.00


    Cpu voltage: 1.104v

    Cpu Sa voltage 1.112v

    Cpu IO voltage 0.952v

    Dram voltage 1.200v

    (There are others as well but they don't have any numbers next to them and everything is set to auto)
      My ComputerSystem Spec

  2.    17 Dec 2015 #52

    Also found these extra voltages on another screen


    System/5v : 5.040

    System/12v : 12.288
      My ComputerSystem Spec

  3. axe0's Avatar
    Posts : 13,721
    Windows 10 Pro
       17 Dec 2015 #53

    Only the DRAM values were needed :)
    The others would be useful to, later if this proceeds

    BSOD everytime Diagnostics Test BSOD everytime

    Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums

    Note   Note
    Do not run SeaTools on an SSD as the results will be invalid.

    Run chkdsk
    Disk Check - Windows 7 Help Forums

    Run HDTune to
    • scan for errors, no quick scan but full scan
    • check the health,
    • benchmark.

    It may take some time, but please take the time you need to perform it properly.
    Let me know what the results are
    • of the error scan,
    • make a screenshot of the health of every hard drive and post the screenshots,
    • post screenshots with the benchmark of the
      • transfer rate,
      • access time,
      • burst rate,
      • cpu usage.
      My ComputersSystem Spec

  4.    17 Dec 2015 #54

    i ran seatools and did the scan for long generic test and the harddrive passed that.

    i did diskcheck for both ssd and hdd no errors there.

    Also did the chkdsk command in cmd for both and had to restart for ssd, it said no errors there as well and test was successful.

    OK so for HD tune here are the results.

    (i only did hd tune on my ssd since thats what i use for windows and everything. It does all the booting and stuff)
      My ComputerSystem Spec

  5. axe0's Avatar
    Posts : 13,721
    Windows 10 Pro
       17 Dec 2015 #55

    It is recommended to run HDtune on every hard drive
      My ComputersSystem Spec

  6.    17 Dec 2015 #56

    ok here are the results for the other harddrive.
      My ComputerSystem Spec

  7. axe0's Avatar
    Posts : 13,721
    Windows 10 Pro
       17 Dec 2015 #57

    The error scan is still busy.
      My ComputersSystem Spec

  8.    17 Dec 2015 #58

    here is the rest of it. Sorry about that, i didnt get a full scan right there since it gave me the option to start again and not the option to stop the scan so i just took a screenshot there but now that i realised it. i did the scan for the last bit separately, from 800gb to 1000gb.

    if you like i can do the full scan again as well.
      My ComputerSystem Spec

  9. axe0's Avatar
    Posts : 13,721
    Windows 10 Pro
       17 Dec 2015 #59

    I hope it won't be necessary, let me know if another bluescreen occurs.
    Fortunately, sometimes just performing the tests help with fixing the bluescreens :)
      My ComputersSystem Spec

  10.    17 Dec 2015 #60

    ok ill keep on it. :)
      My ComputerSystem Spec

Page 6 of 10 FirstFirst ... 45678 ... LastLast

Related Threads
I guess they think I want to see these things. I apologize for not knowing what to call them other than "pictures". Every time I open the lid for the computer when it has been "sleeping" or I start up my laptop. These is some picture with a note in...
Hi. HP Pavilion laptop, Windows 10 Pro Intel i5, 2.60 GHz 8 GB Ram. I was on 8.1 but did a clean install following the guides on the forums and it worked great. Only issue I had was with the Synaptics settings that keeps resseting after...
Hello. I am a bit confused, i have installed a clean windows 10 installation, and i keep having these different BSOD every time my computer is making a cold start = i shut the pc down in the evening and in the morning BSOD starts the day.. the...
It has been doing this EVERY time I restart or start up my computer. It is very annoying as it clears some of my apps. It also says it is putting me on a temporary account or something like that. If I could get some help, it would be much...
Hello everyone! My problem is, that my cd rom opens when my windows boots up, this only happens with windows 10, never had anything like this before. It happens sometimes, sometimes not. If this helps: I installed a virtua cd mount program.
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 20:48.
Find Us