Windows 10: BSOD everytime

Page 4 of 10 FirstFirst ... 23456 ... LastLast
  1. axe0's Avatar
    Posts : 13,707
    Windows 10 Pro
       11 Dec 2015 #31

    axe0 said: View Post
    The 0x12B(FAULTY_HARDWARE_CORRUPTED_PAGE) is caused by memory hardware.
    Please try following, you have access to another pc/laptop for downloading?

    BSOD everytime Diagnostic Test BSOD everytime

    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note

    MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.
      My ComputersSystem Spec

  2.    11 Dec 2015 #32

    The problem is I can't seem to run memtest, with fast boot and secure mode disabled it doesn't even show up on PC however with window whql support disabled I can atleast see the usb and when I try to boot it up I just get a black screen with a blinking cursor. So basically I'm not even able to run memtest
      My ComputerSystem Spec

  3. axe0's Avatar
    Posts : 13,707
    Windows 10 Pro
       11 Dec 2015 #33

    Is the USB a bootable USB?
      My ComputersSystem Spec

  4.    11 Dec 2015 #34

    Yes I have used the same usb before to install Windows as well so it's perfectly capable of booting stuff
      My ComputerSystem Spec

  5. axe0's Avatar
    Posts : 13,707
    Windows 10 Pro
       11 Dec 2015 #35

    Please try another USB to see if that improves anything
      My ComputersSystem Spec

  6.    11 Dec 2015 #36

    ok so i went to shop and bought a new usb stick and luckily it works with this one, it instantly booted (the memtest) so now its just doing its thing my itself so roughly how long do i leave it like this for? I know I am supposed to wait atleast 8 passes but how long does 8 passes usually take
      My ComputerSystem Spec

  7. axe0's Avatar
    Posts : 13,707
    Windows 10 Pro
       11 Dec 2015 #37

    Usually 8 passes takes around 7-10h, but it may vary for some unknown reasons. It could also take twice the time it should take or longer.
      My ComputersSystem Spec

  8.    12 Dec 2015 #38

    ok so i left pc on the whole day and i got about 20 passes and from what i can see not a single error in there. Seems like the RAM is perfectly fine. Now I am thinking of what else it could be, when i was installing all the drivers i did install something called msi ram disk which is basically a disk running on ram but i disabled that straight after install (didnt uninstall).
    I doubt it could be the ramdisk, would you know of any other possible option
      My ComputerSystem Spec

  9.    12 Dec 2015 #39

    so i just looked around online had a look at these 2 error codes from event viewer and popped them in google:

    - Windows failed fast startup with error status 0xC00000D4

    - Windows failed fast startup with error status 0xC0000001

    these are the 2 main errors showing up there and there event ID is 29 and it seems that these might me causing the "kernet-boot"

    googled each of them and 0xC00000D4 seems to do something with fast startup and i have noticed while i have fast startup disabled in win10, I am not really getting any BSODs so far.

    the other error has something to do with harddrive or something.

    Here are the two links i got info from if you want to check:

    KERNEL_DATA_INPAGE_ERROR and Device - Microsoft Community
      My ComputerSystem Spec

  10. axe0's Avatar
    Posts : 13,707
    Windows 10 Pro
       12 Dec 2015 #40

    It sometimes happens that fast startup gives problems yes.

    See how it goes the next few days and report back :)
      My ComputersSystem Spec

Page 4 of 10 FirstFirst ... 23456 ... LastLast

Related Threads
I guess they think I want to see these things. I apologize for not knowing what to call them other than "pictures". Every time I open the lid for the computer when it has been "sleeping" or I start up my laptop. These is some picture with a note in...
Hi. HP Pavilion laptop, Windows 10 Pro Intel i5, 2.60 GHz 8 GB Ram. I was on 8.1 but did a clean install following the guides on the forums and it worked great. Only issue I had was with the Synaptics settings that keeps resseting after...
Hello. I am a bit confused, i have installed a clean windows 10 installation, and i keep having these different BSOD every time my computer is making a cold start = i shut the pc down in the evening and in the morning BSOD starts the day.. the...
It has been doing this EVERY time I restart or start up my computer. It is very annoying as it clears some of my apps. It also says it is putting me on a temporary account or something like that. If I could get some help, it would be much...
Hello everyone! My problem is, that my cd rom opens when my windows boots up, this only happens with windows 10, never had anything like this before. It happens sometimes, sometimes not. If this helps: I installed a virtua cd mount program.
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 11:27.
Find Us