1.    29 Nov 2015 #1
    Join Date : Nov 2015
    Posts : 4
    Windows 10

    NTOSKRNL Crash


    Hey guys,
    I have been having an issue with my computer randomly shutting off (when I am not near the computer). My PC almost almost posts a BSOD when I manually restart or shutdown the computer. I have checked the dump logs, which point back to ntoskrnl.exe as the problem. I have checked my memory, which is good (according to memtestx86). I even reset my Windows 10 (using the "keep files" option), and the issue still persists. I also reset my CPU and memory to non-overclocked settings. I uploaded my dump files, and will run driver verifier and sfc, uploading any more files in the process.
    Thanks
      My ComputerSystem Spec
  2.    29 Nov 2015 #2
    Join Date : Nov 2015
    Posts : 4
    Windows 10
    Thread Starter

    Here is my SFC log (with errors). Again, this is a newly restored copy of Windows 10, with all updates. All that I have installed is NVIDIA drivers. Everything else was done by Windows automatically.
    I should also add that I ran memtestx86 and driver verifier (in progress) after I defaulted the voltage values in the BIOS. No instability thus far.
      My ComputerSystem Spec
  3.    30 Nov 2015 #3
    Join Date : Jun 2015
    Posts : 12,965
    Windows 10 Pro

    Hi butterblum,

    Welcome to the 10forums.

    The crashes are caused by an AMD driver 'ATI Unified AVStream service Driver'
    Driver Reference Table - atinavrr.sys
    Please update this driver.
    Code:
    *** WARNING: Unable to verify timestamp for atinavrr.sys
    *** ERROR: Module load completed but symbols could not be loaded for atinavrr.sys
    I recommend to remove ASUS software, some are known for causing bluescreens, like ASUS AI Suite (version doesn't matter).
      My ComputersSystem Spec
  4.    30 Nov 2015 #4
    Join Date : Nov 2015
    Posts : 4
    Windows 10
    Thread Starter

    My PC only started doing this recently. I think it was around when I installed ASUS GPUTweak, which is no longer installed, as I reset windows. I have used Windows 10 with ASUS AI Suite for months with no issue, until everything started acting up a month ago.
    I updated the ATI drivers to the versions which were stable under Windows 7, however the crash happened again.
    I attached my newest dump file.
    Could this be a hardware issue?
      My ComputerSystem Spec
  5.    01 Dec 2015 #5
    Join Date : Jun 2015
    Posts : 12,965
    Windows 10 Pro

    Why do you think this is a hardware issue?
      My ComputersSystem Spec
  6.    01 Dec 2015 #6
    Join Date : Jun 2015
    Posts : 12,965
    Windows 10 Pro

    If I'm correct this driver is from a USB TV tuner?
    If I'm correct, disconnect this device, remove the drivers and see how it goes.
    Code:
    *** WARNING: Unable to verify timestamp for atinavrr.sys
    *** ERROR: Module load completed but symbols could not be loaded for atinavrr.sys
    1: kd> lmvm atinavrr
    
    start             end                 module name
    fffff801`f3c90000 fffff801`f3e0c380   atinavrr T (no symbols)           
        Loaded symbol image file: atinavrr.sys
        Image path: \SystemRoot\system32\DRIVERS\atinavrr.sys
        Image name: atinavrr.sys
        Timestamp:        Wed Nov 04 15:11:24 2009 (4AF18B8C)
        CheckSum:         0017D8AF
        ImageSize:        0017C380
        Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
      My ComputersSystem Spec

 


Similar Threads
Thread Forum
Windows 10 became suddenly unreliable, with Crash after Crash!
Windows 10 has been working like a Dream but now its turned into a nightmare! Constantly Crashing after an hour of use, has anyone else had this problem, as its been working fine for months.
General Support
BSOD because of ntoskrnl.exe
Hello guys, I had trouble with my windows 7 : bosd because of ntoskrnl.exe so i decided to do a clean install windows 10 for a new fresh start. But the bsod is still here so i think its probably Hardware problems but wich one ? I've only...
BSOD Crashes and Debugging
BSOD ntoskrnl.exe fix?
Computer has been crashing a ton recently and I am looking for a fix, please respond if you know any anything.
BSOD Crashes and Debugging
UNEXPECTED_KERNEL_MODE_TRAP (ntoskrnl.exe)
Hi folks, I've been getting frequent UNEXPECTED_KERNEL_MODE_TRAP crashes ever since I upgraded from Windows 8.1. Opening the Minidump in BlueScreenView points to ntoskrnl.exe. I am also experiencing other symptoms, perhaps related to this...
BSOD Crashes and Debugging
Solved BSOD in ntoskrnl.exe
This is the most recent BSOD. I have no idea on what is causing the problem. I dont know if it's a chipset driver, graphics card issue, sound card issue, or an on the mainboard component that is causing the issue. This morning I was rendering a...
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 20:22.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums