Blue screens + system hangs during stresstest/benchmark

Hello,

My system had 2 blue screen the past few weeks, so I decided to try to check for eventual hardware and software problems, I started by running a stress test with ROG realbench since my CPU is overclocked, it gave me an error already(program stopped working), so after doing more tweaking(increasing voltage), then I finally put back the default speed because it wouldn't even start, altought at the beggining it crashed right away when I clicked start, and after putting more voltage, it starts and works for a bit and then the PC just hangs, and it still does it at stock speed.. which is quite weird ! it also did it with cinebench, but the strange things is I played numerous hours of starcraft 2 without problem, also I wasn't doing anything when the blue screens happend.

I ran a windows memory test, no errors detected (haven't ran memtest though..) I also did a sfc /scannow and it didn't detected anything wrong..

So I'm kind of out of ideas and I'm starting to think it's more related to windows than hardware.

I'll put a screenshot of the past blue screens from whocrashed :

Attachment 50996



Any help would be greatly appreciated :)

Please run the dm log collector again, there are several important files missing.
The files that should be in the zip:

• 19 .txt,
• 1 .nfo
• 1 or more .dmp

   Warning

Programs that claim to update your drivers install either the wrong or corrupted drivers.
If you have installed any driver with Driver Booster 3, please remove them as it may cause trouble.

If you have installed drivers from DB3, you may be able to revert them back in device manager using the option 'roll back driver'.
Attachment 51184
Note the devices you have rolled back the drivers from and try to update the drivers in device manager after you have rolled them back.

Please uninstall CPU-Z and Panda, from both programs some drivers have been flagged.
Panda - Uninstall Completely - Windows 7 Help Forums

Code:

*** WARNING: Unable to verify timestamp for cpuz138_x64.sys
*** ERROR: Module load completed but symbols could not be loaded for cpuz138_x64.sys

ffffd000`27b73d48  fffff801`10035a5fUnable to load image \SystemRoot\system32\DRIVERS\PSINProt.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for PSINProt.sys
*** ERROR: Module load completed but symbols could not be loaded for PSINProt.sys
 PSINProt+0x5a5f

ffffd000`27b73da0  fffff801`0e8fad01Unable to load image \SystemRoot\system32\DRIVERS\PSINKNC.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for PSINKNC.sys
*** ERROR: Module load completed but symbols could not be loaded for PSINKNC.sys
 PSINKNC+0x2ad01

ffffd000`27b73dc8  fffff801`100126d0Unable to load image \SystemRoot\system32\DRIVERS\PSINAflt.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for PSINAflt.sys
*** ERROR: Module load completed but symbols could not be loaded for PSINAflt.sys
 PSINAflt+0x126d0

Let me know how it goes :)

Ok uninstalled panda and cpu-z, however for the drivers it gets more complicated as it's not telling me which one I updated with driver booster, so I'll have to look in the device manager and find the drivers I updated with it... thanks for the help, I will now try to run a stress test see if it works..

Oops, I uninstalled CPU-Z and Panda, but I also did a system restore (to try to get rid of the bad drivers) and now cpu z and panda still shows in my installed programs, but panda didn't launch with windows.. so it appears to be uninstalled however when I click uninstall on the list it won't work gives me an error message.

Edit : ok ran realbench 15mn stress test without problems, looking good ! so far it seems fixed, thanks alot for your help ! I feel it hard to believe some softwares created those crashs, but you're right if driver booster installed some wrong drivers... that might have been it

How are you trying to remove panda?