Windows 10: System_service Exception, Memory Management

  1.    25 Nov 2015 #1

    System_service Exception, Memory Management


    Alright.. going to give this forum a shot, I've tried tomshardware for over a month to no avail... I keep getting a BSOD over Memory management System service exception iqrl less than or equal to etc.. I've gotten minidump files for them and ran driver verifiers, when I run verifier I can't load into windows and have to boot through safe mode to disable it.
    Using the bluescreen view app I see they are related to ntoskrnl.exe and atikmdag.sys. I've looked though the minidumps and I get something about kernel symbols being wrong? I'm unsure if this is an out of date driver or what. I've installed a new SSD due to thinking it was my old HDD, I've ran memory tests on my ram and neither seem to have issues, I'm about ready to just take a 12ga to the computer at this point.. so any help would be much appreciated, and the neighbors wont think they live next to a crazy person.

    Microsoft (R) Windows Debugger Version 10.0.10240.9 X86
    Copyright (c) Microsoft Corporation. All rights reserved.




    Loading Dump File [C:\Users\Absol\Desktop\112515-12312-01.dmp]
    Mini Kernel Dump File: Only registers and stack trace are available




    ************* Symbol Path validation summary **************
    Response Time (ms) Location
    OK C:\Windows\Minidump
    Symbol search path is: C:\Windows\Minidump
    Executable search path is:
    Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for ntoskrnl.exe
    *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
    Windows 10 Kernel Version 10240 MP (8 procs) Free x64
    Product: WinNt, suite: TerminalServer SingleUserTS Personal
    Built by: 10240.16463.amd64fre.th1.150819-1946
    Machine Name:
    Kernel base = 0xfffff801`48c80000 PsLoadedModuleList = 0xfffff801`48fa5030
    Debug session time: Wed Nov 25 20:20:38.171 2015 (UTC - 5:00)
    System Uptime: 0 days 6:51:52.120
    Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for ntoskrnl.exe
    *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
    Loading Kernel Symbols
    ...............................................................
    ................................................................
    .................................
    Loading User Symbols


    ************* Symbol Loading Error Summary **************
    Module name Error
    ntoskrnl The system cannot find the file specified


    You can troubleshoot most symbol related issues by turning on symbol loading diagnostics (!sym noisy) and repeating the command that caused symbols to be loaded.
    You should also verify that your symbol search path (.sympath) is correct.
    No .natvis files found at C:\Program Files (x86)\Windows Kits\10\Debuggers\x86\Visualizers.
    *******************************************************************************
    * *
    * Bugcheck Analysis *
    * *
    *******************************************************************************


    Use !analyze -v to get detailed debugging information.


    BugCheck 3B, {c0000005, fffff80148ca36d3, ffffd0018a235670, 0}


    ***** Kernel symbols are WRONG. Please fix symbols to do analysis.


    *************************************************************************
    *** ***
    *** ***
    *** Either you specified an unqualified symbol, or your debugger ***
    *** doesn't have full symbol information. Unqualified symbol ***
    *** resolution is turned off by default. Please either specify a ***
    *** fully qualified symbol module!symbolname, or enable resolution ***
    *** of unqualified symbols by typing ".symopt- 100". Note that ***
    *** enabling unqualified symbol resolution with network symbol ***
    *** server shares in the symbol path may cause the debugger to ***
    *** appear to hang for long periods of time when an incorrect ***
    *** symbol name is typed or the network symbol server is down. ***
    *** ***
    *** For some commands to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** ***
    *** Type referenced: nt!_KPRCB ***
    *** ***
    *************************************************************************
    *************************************************************************
    *** ***
    *** ***
    *** Either you specified an unqualified symbol, or your debugger ***
    *** doesn't have full symbol information. Unqualified symbol ***
    *** resolution is turned off by default. Please either specify a ***
    *** fully qualified symbol module!symbolname, or enable resolution ***
    *** of unqualified symbols by typing ".symopt- 100". Note that ***
    *** enabling unqualified symbol resolution with network symbol ***
    *** server shares in the symbol path may cause the debugger to ***
    *** appear to hang for long periods of time when an incorrect ***
    *** symbol name is typed or the network symbol server is down. ***
    *** ***
    *** For some commands to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** ***
    *** Type referenced: nt!_KPRCB ***
    *** ***
    *************************************************************************
    *************************************************************************
    *** ***
    *** ***
    *** Either you specified an unqualified symbol, or your debugger ***
    *** doesn't have full symbol information. Unqualified symbol ***
    *** resolution is turned off by default. Please either specify a ***
    *** fully qualified symbol module!symbolname, or enable resolution ***
    *** of unqualified symbols by typing ".symopt- 100". Note that ***
    *** enabling unqualified symbol resolution with network symbol ***
    *** server shares in the symbol path may cause the debugger to ***
    *** appear to hang for long periods of time when an incorrect ***
    *** symbol name is typed or the network symbol server is down. ***
    *** ***
    *** For some commands to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** ***
    *** Type referenced: nt!_KPRCB ***
    *** ***
    *************************************************************************
    *************************************************************************
    *** ***
    *** ***
    *** Either you specified an unqualified symbol, or your debugger ***
    *** doesn't have full symbol information. Unqualified symbol ***
    *** resolution is turned off by default. Please either specify a ***
    *** fully qualified symbol module!symbolname, or enable resolution ***
    *** of unqualified symbols by typing ".symopt- 100". Note that ***
    *** enabling unqualified symbol resolution with network symbol ***
    *** server shares in the symbol path may cause the debugger to ***
    *** appear to hang for long periods of time when an incorrect ***
    *** symbol name is typed or the network symbol server is down. ***
    *** ***
    *** For some commands to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** ***
    *** Type referenced: nt!_KPRCB ***
    *** ***
    *************************************************************************
    *************************************************************************
    *** ***
    *** ***
    *** Either you specified an unqualified symbol, or your debugger ***
    *** doesn't have full symbol information. Unqualified symbol ***
    *** resolution is turned off by default. Please either specify a ***
    *** fully qualified symbol module!symbolname, or enable resolution ***
    *** of unqualified symbols by typing ".symopt- 100". Note that ***
    *** enabling unqualified symbol resolution with network symbol ***
    *** server shares in the symbol path may cause the debugger to ***
    *** appear to hang for long periods of time when an incorrect ***
    *** symbol name is typed or the network symbol server is down. ***
    *** ***
    *** For some commands to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** ***
    *** Type referenced: nt!_KTHREAD ***
    *** ***
    *************************************************************************
    *************************************************************************
    *** ***
    *** ***
    *** Either you specified an unqualified symbol, or your debugger ***
    *** doesn't have full symbol information. Unqualified symbol ***
    *** resolution is turned off by default. Please either specify a ***
    *** fully qualified symbol module!symbolname, or enable resolution ***
    *** of unqualified symbols by typing ".symopt- 100". Note that ***
    *** enabling unqualified symbol resolution with network symbol ***
    *** server shares in the symbol path may cause the debugger to ***
    *** appear to hang for long periods of time when an incorrect ***
    *** symbol name is typed or the network symbol server is down. ***
    *** ***
    *** For some commands to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** ***
    *** Type referenced: nt!_KPRCB ***
    *** ***
    *************************************************************************
    *************************************************************************
    *** ***
    *** ***
    *** Either you specified an unqualified symbol, or your debugger ***
    *** doesn't have full symbol information. Unqualified symbol ***
    *** resolution is turned off by default. Please either specify a ***
    *** fully qualified symbol module!symbolname, or enable resolution ***
    *** of unqualified symbols by typing ".symopt- 100". Note that ***
    *** enabling unqualified symbol resolution with network symbol ***
    *** server shares in the symbol path may cause the debugger to ***
    *** appear to hang for long periods of time when an incorrect ***
    *** symbol name is typed or the network symbol server is down. ***
    *** ***
    *** For some commands to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** ***
    *** Type referenced: nt!_KPRCB ***
    *** ***
    *************************************************************************
    *************************************************************************
    *** ***
    *** ***
    *** Either you specified an unqualified symbol, or your debugger ***
    *** doesn't have full symbol information. Unqualified symbol ***
    *** resolution is turned off by default. Please either specify a ***
    *** fully qualified symbol module!symbolname, or enable resolution ***
    *** of unqualified symbols by typing ".symopt- 100". Note that ***
    *** enabling unqualified symbol resolution with network symbol ***
    *** server shares in the symbol path may cause the debugger to ***
    *** appear to hang for long periods of time when an incorrect ***
    *** symbol name is typed or the network symbol server is down. ***
    *** ***
    *** For some commands to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** ***
    *** Type referenced: nt!_KTHREAD ***
    *** ***
    *************************************************************************
    *************************************************************************
    *** ***
    *** ***
    *** Either you specified an unqualified symbol, or your debugger ***
    *** doesn't have full symbol information. Unqualified symbol ***
    *** resolution is turned off by default. Please either specify a ***
    *** fully qualified symbol module!symbolname, or enable resolution ***
    *** of unqualified symbols by typing ".symopt- 100". Note that ***
    *** enabling unqualified symbol resolution with network symbol ***
    *** server shares in the symbol path may cause the debugger to ***
    *** appear to hang for long periods of time when an incorrect ***
    *** symbol name is typed or the network symbol server is down. ***
    *** ***
    *** For some commands to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** ***
    *** Type referenced: nt!_KPRCB ***
    *** ***
    *************************************************************************
    *************************************************************************
    *** ***
    *** ***
    *** Either you specified an unqualified symbol, or your debugger ***
    *** doesn't have full symbol information. Unqualified symbol ***
    *** resolution is turned off by default. Please either specify a ***
    *** fully qualified symbol module!symbolname, or enable resolution ***
    *** of unqualified symbols by typing ".symopt- 100". Note that ***
    *** enabling unqualified symbol resolution with network symbol ***
    *** server shares in the symbol path may cause the debugger to ***
    *** appear to hang for long periods of time when an incorrect ***
    *** symbol name is typed or the network symbol server is down. ***
    *** ***
    *** For some commands to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** ***
    *** Type referenced: nt!_KPRCB ***
    *** ***
    *************************************************************************
    Probably caused by : ntoskrnl.wrong.symbols.exe ( nt_wrong_symbols!55D5626B852000 )


    Followup: MachineOwner
    ---------
      My ComputerSystem Spec


  2. Posts : 11,495
    Windows 10 Pro
       26 Nov 2015 #2
      My ComputersSystem Spec


 

Related Threads
Windows 10 Memory Management in General Support
I installed Windows 10 64 bit on Nov. 7. It was good for a day or two. Not the system crashes after being started for 8 to 81/2 hours. This happens every day. I get an error say: Your PC has encountered an error and needs to restart. It...
Quite an array of different codes been popping up since I upgraded to windows 10 in the last couple of months irql_not_less_or_equal memory management was another one I have attached several dumps, as I am a bit at my wits end as to...
Solved BSoD Memory Management at Desktop + Ingame in BSOD Crashes and Debugging
Hey guys, I built a new PC and now I have some troubles getting it to work. I get so many bluescreens, most of them appear when I am on the desktop a few minutes after the PC starts (sometimes I can start playing games, but after a few minutes...
Solved BSOD Memory Management (poss. iastor.sys) in BSOD Crashes and Debugging
I downloaded and ran dm_log_collector.exe but it did not generate a zip file. It generated a folder named "SFdebugFiles" containing dumps for the last five days. Is this what is needed? Background: My computer has been running Win-7 Pro for...
Memory Management, system secuiry service etc. in BSOD Crashes and Debugging
hello, i've been having random bsod issues. and i can not seem to figure out the trigger of these bsod's. i get memory management when im browsing, playing a game or when i dont even use the laptop. The system security bsod i have no clue on. My...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 12:53.
Find Us