1.    18 Nov 2015 #1
    Join Date : Nov 2015
    Posts : 5
    Windows 10 64-bit

    Wake from hibernation and random BSoDs


    Hi,

    It happens very random and also everytime when I try wake PC from hibernation

    Thanks
    Last edited by Rajce; 20 Nov 2015 at 12:35.
      My ComputerSystem Spec
  2.    19 Nov 2015 #2
    Join Date : Nov 2015
    Posts : 5
    Windows 10 64-bit
    Thread Starter

    Anyone?
      My ComputerSystem Spec
  3.    20 Nov 2015 #3
    Join Date : Jun 2015
    Posts : 12,651
    Windows 10 Pro

    Hi Rajce,

    Please try editing your system specs again.

    This looks like a 1time bluescreen, according to the logs.
    Have you had more bluescreens? If not then this isn't something to worry about as Windows takes the appropriate actions to solve it.

    If you however would like to do something, I suggest you follow these instructions
    Please uninstall everything of Nvidia using Display Driver Uninstaller and install new drivers from Nvidia. Be sure the clean install box is checked and only install the Graphics driver and the PhysX driver.
    Code:
    *** WARNING: Unable to verify timestamp for nvlddmkm.sys
    *** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
      My ComputersSystem Spec
  4.    20 Nov 2015 #4
    Join Date : Nov 2015
    Posts : 5
    Windows 10 64-bit
    Thread Starter

    Hi,

    Yes, i had more bluescreens, but I made a clean install and the log was created after first BSoD.

    I uninstalled drivers in safe mode and Installed new from Nvidia exactly as you said.

    I upload new log if BSoDs will prevail.

    Thank you very much
      My ComputerSystem Spec
  5.    20 Nov 2015 #5
    Join Date : Jun 2015
    Posts : 12,651
    Windows 10 Pro

    You're welcome

    I'm pleased to help.
      My ComputersSystem Spec
  6.    20 Nov 2015 #6
    Join Date : Nov 2015
    Posts : 5
    Windows 10 64-bit
    Thread Starter

    Reinstall of nvidia drivers didn't help :/
      My ComputerSystem Spec
  7.    20 Nov 2015 #7
    Join Date : Jun 2015
    Posts : 12,651
    Windows 10 Pro

    If you are using a program like Ccleaner please stop using it while troubleshooting.
    This because programs like Ccleaner remove dump files that are needed to troubleshoot.
    Or configure Ccleaner to not remove dump files:


    Please run MemTest86+ to test the memory
    Code:
    Probably caused by : memory_corruption



    Wake from hibernation and random BSoDs Diagnostic Test Wake from hibernation and random BSoDs
     RAM TEST

    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note


    MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.
      My ComputersSystem Spec
  8.    20 Nov 2015 #8
    Join Date : Nov 2015
    Posts : 5
    Windows 10 64-bit
    Thread Starter

    3000+ errors after 10 minutes Should I try to plug mems to the other slots on MB and then run the test again?
      My ComputerSystem Spec
  9.    20 Nov 2015 #9
    Join Date : Jun 2015
    Posts : 12,651
    Windows 10 Pro

    Yes, to find out if it is the slot or the stick
      My ComputersSystem Spec

 


Similar Threads
Thread Forum
Random BSODS
Hello guys , i have bsods and game crashes of steam .I putted a new ram because the previous ram kit died (faulty rams causing bsods)and also i have a new graphic card r9 280 (because the previous gtx480 died too) . What can i do ? Bumps are not...
BSOD Crashes and Debugging
Random BSODs
Hi folks! I installed Win 10 on my home server and it keeps crashing all the time with random BSODs (with a bunch of different error messages). Before that, it was running fine on Win Home Server 2011. I tried a bunch of driver combinations...
BSOD Crashes and Debugging
Random BSODs while working
After switching to Windows 10 from Windows 7 and performing a clean install, I am getting occasional BSODs and I am unaware of any trigger... Please see my reports attached - I tried to do some research and it seems to be related with some...
BSOD Crashes and Debugging
Solved Random Bsods - IRQL_NOT_LESS_OR_EQUAL
Hello, I'm having some problems with random Bsods after upgrade from windows 7 to 10 (not clean install). I did clean reinstall of most of the drivers 1 by 1 to try and track down what's causing the issue without any luck. First i thought...
BSOD Crashes and Debugging
Random Reboots/Won't Wake From Sleep - m/kb unresponsive
Hi, I'm running Windows 10 on an old Phenom II machine that I've been using for years. I never had problems with it on 7 or 8.1 but am having plenty since I upgraded to 10. My biggest issue is the computer becoming nonresponsive and only...
Performance & Maintenance
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 19:11.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums