1.    06 Nov 2015 #1
    Join Date : Nov 2015
    Posts : 3
    Windows 10 64 bit

    Getting different multiple BSODs, please help


    I recently upgraded my PC and I recently started getting BSODs during my gaming time. Please help me identify the issue, I attached the rar of my dumpfile
    EDIT: After posting this thread I received a SECOND BSOD on a different issue.
    EDIT: I keep getting crazy amounts of BSOD, even one after another or before the computer can even start up. I am desperate for help
    Last edited by Tainysi; 06 Nov 2015 at 20:11.
      My ComputerSystem Spec
  2.    06 Nov 2015 #2
    Join Date : Nov 2015
    Posts : 3
    Windows 10 64 bit
    Thread Starter

    I am extremely desperate for help, if anyone can please take a look at my problem
      My ComputerSystem Spec
  3.    07 Nov 2015 #3
    Join Date : Jun 2015
    Posts : 12,968
    Windows 10 Pro

    Hi Tainysi,

    Welcome to the 10forums.

    There have been 2 drivers flagged and a few dumps are pointing to memory corruption which could be due to drivers.

    Please uninstall everything of Nvidia using Display Driver Uninstaller and install new drivers from Nvidia. Be sure the clean install box is checked and only install the Graphics driver and the PhysX driver.
    Code:
    *** WARNING: Unable to verify timestamp for nvlddmkm.sys
    *** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
    7: kd> lmvm nvlddmkm
    start             end                 module name
    fffff801`ce3a0000 fffff801`cee97000   nvlddmkm T (no symbols)           
        Loaded symbol image file: nvlddmkm.sys
        Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
        Image name: nvlddmkm.sys
        Timestamp:        Mon Nov 02 13:59:49 2015 (56375E45)
        CheckSum:         00AC236B
        ImageSize:        00AF7000
        Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
    This is a driver from Windows, I suggest you run SFC
    Code:
    *** WARNING: Unable to verify timestamp for peauth.sys
    *** ERROR: Module load completed but symbols could not be loaded for peauth.sys



    2 BSOD, Windows 10 64 bit, ntoskrnl.exe, need help identifying problem Diagnostics Test 2 BSOD, Windows 10 64 bit, ntoskrnl.exe, need help identifying problem
     System File Check

    Please try following:
    • Open an admin command prompt
    • Copy/paste "sfc/scannow" (without quotes) and press enter
    • When it finished reboot your system
    • Open again an admin command prompt
    • Enter sfc/scannow again

    If sfc/scannow does NOT say "Windows Resource Protection did not find any integrity violation" after the second SFC, please upload the cbs.log file located at {windows partition}\Windows\Logs\CBS\, if the file is too large try a 3rd party uploader like dropbox, onedrive, google drive, mediafire etc.
    System File Check(SFC a.k.a. Windows Resource Protection) needs to have your system rebooted in order for sfc to try to fix the problems that it finds.

    Then we also have
    Code:
    Probably caused by : memory_corruption
    Just to rule the RAM out, please run MemTest86+



    2 BSOD, Windows 10 64 bit, ntoskrnl.exe, need help identifying problem Diagnostic Test 2 BSOD, Windows 10 64 bit, ntoskrnl.exe, need help identifying problem
     RAM TEST

    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note


    MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.
      My ComputersSystem Spec
  4.    10 Nov 2015 #4
    Join Date : Nov 2015
    Posts : 3
    Windows 10 64 bit
    Thread Starter

    Quote Originally Posted by axe0 View Post
    Hi Tainysi,

    Welcome to the 10forums.

    There have been 2 drivers flagged and a few dumps are pointing to memory corruption which could be due to drivers.

    Please uninstall everything of Nvidia using Display Driver Uninstaller and install new drivers from Nvidia. Be sure the clean install box is checked and only install the Graphics driver and the PhysX driver.
    Code:
    *** WARNING: Unable to verify timestamp for nvlddmkm.sys
    *** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
    7: kd> lmvm nvlddmkm
    start             end                 module name
    fffff801`ce3a0000 fffff801`cee97000   nvlddmkm T (no symbols)           
        Loaded symbol image file: nvlddmkm.sys
        Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
        Image name: nvlddmkm.sys
        Timestamp:        Mon Nov 02 13:59:49 2015 (56375E45)
        CheckSum:         00AC236B
        ImageSize:        00AF7000
        Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
    This is a driver from Windows, I suggest you run SFC
    Code:
    *** WARNING: Unable to verify timestamp for peauth.sys
    *** ERROR: Module load completed but symbols could not be loaded for peauth.sys



    2 BSOD, Windows 10 64 bit, ntoskrnl.exe, need help identifying problem Diagnostics Test 2 BSOD, Windows 10 64 bit, ntoskrnl.exe, need help identifying problem
     System File Check

    Please try following:
    • Open an admin command prompt
    • Copy/paste "sfc/scannow" (without quotes) and press enter
    • When it finished reboot your system
    • Open again an admin command prompt
    • Enter sfc/scannow again

    If sfc/scannow does NOT say "Windows Resource Protection did not find any integrity violation" after the second SFC, please upload the cbs.log file located at {windows partition}\Windows\Logs\CBS\, if the file is too large try a 3rd party uploader like dropbox, onedrive, google drive, mediafire etc.
    System File Check(SFC a.k.a. Windows Resource Protection) needs to have your system rebooted in order for sfc to try to fix the problems that it finds.

    Then we also have
    Code:
    Probably caused by : memory_corruption
    Just to rule the RAM out, please run MemTest86+



    2 BSOD, Windows 10 64 bit, ntoskrnl.exe, need help identifying problem Diagnostic Test 2 BSOD, Windows 10 64 bit, ntoskrnl.exe, need help identifying problem
     RAM TEST

    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note


    MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.
    Hey Axe! I see that you reply to everyone. I fixed my problem by simply updating my bios. You should add that to your list of fixes. It seems to be a lot with the asrock H170S and Z170s
      My ComputerSystem Spec
  5.    10 Nov 2015 #5
    Join Date : Jun 2015
    Posts : 12,968
    Windows 10 Pro

    I reply whenever I am able to

    Their are many different fixes for different BSOD crashes, it isn't really something I can simply add to a list of possible fixes for specific crashes (some are an exception), but it was already on the list for generic troubleshooting

    Glad to hear your problem is solved, thank you for reporting back your solution
      My ComputersSystem Spec

 


Similar Threads
Thread Forum
Ntoskrnl.exe Bsod
Hello, i have costume build pc for a years now , i think last year i had to change cooler and its probably when my problems started , or could be later im not sure , basicly now everyday when i first start up pc its getting freezed , if i restart...
BSOD Crashes and Debugging
Solved BSOD caused by ntoskrnl.exe please help
Hey all, I've attached 4 minidumps. Can you please help troubleshoot this intermittent BSOD?
BSOD Crashes and Debugging
BSOD caused by ntoskrnl.exe
Hello! I have recurring blue screens on my laptop and can't seem to figure out what's causing them. Sometimes, the computer also freezes completely without any forewarning and the only way to shut it down is to remoce the battery. I should...
BSOD Crashes and Debugging
BSOD caused by ntoskrnl.exe
BSODs have been happening for a while but I'm not really sure what's the actual cause.
BSOD Crashes and Debugging
Solved BSOD in ntoskrnl.exe
This is the most recent BSOD. I have no idea on what is causing the problem. I dont know if it's a chipset driver, graphics card issue, sound card issue, or an on the mainboard component that is causing the issue. This morning I was rendering a...
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 12:03.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums