Windows 10: Random hard resets with no errors, pop-ups, or bsod.

Page 3 of 3 FirstFirst 123
  1.    22 Nov 2015 #21

    Hi, im Sanztrack's friend and owner of the computer we've been working on. I checked the BIOS and i didnt see a 5v but the numbers were:
    1.5v = 1.512v
    12v = 11.952v
    3.3v = 3.401v

    so i ran a game in safe mode, but it seems like i didnt load the drivers in safe mode so it ran at 1fps, but the computer didnt crash, origin did, but the computer or game did not. I unplugged my headphones as well so that the mouse,keyboard and monitor were still plugged in. Sanztrack has used his 850w psu on my pc before and it still crashed so we're fine there. As a test i loaded up Heroes of the Storm, when i got home and after restarting into normal mode, and just went through the menus and it crashed again, even without the headphones in, just incase they mightve caused the problem.
      My ComputerSystem Spec

  2. Posts : 13,345
    Windows 10 Pro
       22 Nov 2015 #22

    In safe mode barely a thing is loaded, only Windows and hardware drivers are loaded.
    GPU drivers are not loaded because Windows has its own drivers for in safe mode.

    I understand in safe mode no bluescreen happened?
      My ComputersSystem Spec

  3.    22 Nov 2015 #23

    Nope, nothing, everything was just fine. Like I said, the only thing that crashed, was Origin.
      My ComputerSystem Spec

  4. Posts : 13,345
    Windows 10 Pro
       22 Nov 2015 #24

    Probably because Origin couldn't load everything properly.

    That is the result I was hoping for

    Random hard resets with no errors, pop-ups, or bsod. Diagnostics Test Random hard resets with no errors, pop-ups, or bsod.
     Clean boot

    Please try the following:
    • Open taskmanager
      • Go to the tab startup
      • disable everything

    • Search msconfig and open it
      • Go to the tab services
      • Check 'hide microsoft services'
      • Uncheck all other services
      • Click apply and click ok

    • Reboot if asked

    See if the problem persist, if the problem does not persist enable in the startup tab in taskmanager 1 item and in the services tab in msconfig also 1 service, reboot and see if the problem persist. Keep doing this until you find the culprit or there is nothing left.

    If the problem still persist, you might need to think of removing each program 1 by 1 to see if the problem still persist.
    When 1 program is removed, try the things that usually caused a crash and see if it happens again.
    If after removing every program the crash still occurs, run driver verifier a few times.
    Driver verifier checks drivers for violations and crashes the system if it finds one, when driver verifier is running just keep doing the things you would normally do but DO NOT run heavy tasks. Driver verifier could cause an extreme lack of performance, running a heavy task while driver verifier is running might cause a few other problems sometimes.
    If driver verifier also can't find anything and the BIOS is also as it should be, then this is a bug in Windows as everything should have been ruled out.
    Note   Note
    In safe mode, not everything of Windows is loaded, this means that in safe mode Windows is NOT 100% ruled out

    Instructions for driver verifier is below, please read it carefully.

    Random hard resets with no errors, pop-ups, or bsod. Diagnostic Test Random hard resets with no errors, pop-ups, or bsod.

    warning   Warning
    Please make a backup of your important files and get your rescue media or create one.
    Please create a restore point.

    Please follow this tutorial to run driver verifier.

    Driver verifier stresses your drivers and will crash your pc if any driver fails due to a violation.

    Driver verifier should be performed for a max of 48 hours, or when you have a bluescreen, whatever comes first.

    If driver verifier has found a violation and you can't get back into windows normally, try to boot into safe mode and reset in safe mode driver verifier, or in the troubleshooting options open command prompt and type verifier /reset.

    Note   Note
    Your system will act very sluggishly while driver verifier is enabled, this is normal as your drivers will be being subjected to heavy testing in order to make them crash.
      My ComputersSystem Spec

Page 3 of 3 FirstFirst 123

Related Threads
Upgraded from Windows 8.1 Pro to 10 Pro. I think I took care of the update bug so I don't believe it is the issue. Updated GForce Drivers after using DisplayDriverUninstaller. SSD C: Drive firmware updated. Ran Memtest86+ on each stick for 8...
***THIS IS ALSO OVER AT THE BSOD SECTION. I'M CONTINUING IT THERE.*** Upgraded from Windows 8.1 Pro to 10 Pro. I think I took care of the update bug so I don't believe it is the issue. Updated GForce Drivers after using...
Hello, I'm new to the forums so thank you in advance to anyone who is willing to help me try and resolve my issues. I recently built the PC I am currently experiencing this issue on. I have built several gaming PC's in the past, but never...
Hi, Over the past couple of days I have been having reasonably frequent BSODs. Some have not created a dump file. I cant pinpoint anything in particular but it seems to be pointing to a driver issue but never identifies the driver from what I can...
Hard drive errors won't fix on reboot in Drivers and Hardware
I am running build 9926, and got a maintenance error message yesterday, "Restart to repair hard drive errors (Important)". noting a need to restart the PC (as is common for NTFS repairs). However, upon restarting the computer, it just boots back...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 09:21.
Find Us