Multiple BSOD errors immediately after startup from sleep Solved

  1.    29 Oct 2015 #1

    Multiple BSOD errors immediately after startup from sleep


    I've been getting a lot of BSOD errors recently but always within a minute or so from starting my computer up from sleep. The messages seem random, but one time I noticed graphical glitches before the BSOD so I have a suspicion that it may be related to the graphics card/drivers. If it doesn't crash within the first few minutes, it seems to be fine.
      My ComputerSystem Spec

  2. axe0's Avatar
    Posts : 13,819
    Windows 10 Pro
       29 Oct 2015 #2

    Hi fooznugget,

    Welcome to the 10forums.

    The dumps are indicating hardware problems, meaning problems with the memory and/or hard drive(s)
    Code:
    SYMBOL_NAME:  REGION_PAGED_OUT
    
    FOLLOWUP_NAME:  MachineOwner
    
    MODULE_NAME: hardware
    
    IMAGE_NAME:  hardware
    
    DEBUG_FLR_IMAGE_TIMESTAMP:  0
    With a 0x1A and some activity leading to the file system in other dumps I recommend to test both the hard drive and memory.



    Multiple BSOD errors immediately after startup from sleep Diagnostics Test Multiple BSOD errors immediately after startup from sleep
     HDD & SSD TEST

    Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums

    Note   Note
    Do not run SeaTools on an SSD as the results will be invalid.


    Run chkdsk Disk Check - Windows 7 Help Forums



    Multiple BSOD errors immediately after startup from sleep Diagnostic Test Multiple BSOD errors immediately after startup from sleep
     RAM TEST

    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note


    MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.
      My ComputersSystem Spec


 

Related Threads
I know it says to install and run the program in the sticky but i can't get into windows PC has been running fine until recently. I have been getting occasional random BSOD errors over the last few days which I didn't think much about, but today...
Hi everyone, I am getting the following BSOD errors: The Crash Files will be posted - bellow --These 2 are most frequent (90% of the time)-- MEMORY MANAGEMENT (13 Times) IRQL_NOT_LESS_OR_EQUAL (8 Times) --These 4 are less frequent (10% of...
BSOD multiple errors i dont have an error code in BSOD Crashes and Debugging
I recently made a new htpc and am using a hard drive from my main pc that i updated to windows 10 from 8.1. I dont have the slightest clue on what is happening. Any help would be appreciated thank you. Edit 8/12/15 9:30 PDT Got error called dpc...
multiple BSOD errors even just from startup in BSOD Crashes and Debugging
We started with basically hourly BSODs. We had a different processor in the computer and it ran fine for several hours, possibly overnight. That's how we found out it was the processor itself, and replaced it. Now, we are still getting...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 19:10.
Find Us