Page 1 of 3 123 LastLast
  1.    29 Oct 2015 #1
    Join Date : Oct 2015
    Posts : 16
    Microsoft Windows 10 Pro 64 bites 14393 Multiprocessor Free

    Multiple BSODs in a fresh install of Windows 10


    I have a Dell Inspiron 17 5748 laptop, and just installed a new SSD disk. The old HDD is now running in place of ODD.
    Since then I get frequent BSODs. I don't think it has something to do with SSD, but who knows.

    Already tried: CHKDSK on both drives, Memtest, and moving pagefile to HDD.

    The requied files are attached:
    Attachment 45333

    Sorry for grammatical mistakes, english is not my native language.
      My ComputerSystem Spec
  2.    29 Oct 2015 #2
    Join Date : Jun 2015
    Posts : 12,952
    Windows 10 Pro

    Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
    Please remove Daemon Tools and run the SPTD pass through remover.

    1. Uninstall Daemon Tools
    2. Download the SPTD standalone installer and follow these steps:
      • Double click the executable to open it
      • Click on the button shown below




    If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window
      My ComputersSystem Spec
  3.    29 Oct 2015 #3
    Join Date : Oct 2015
    Posts : 16
    Microsoft Windows 10 Pro 64 bites 14393 Multiprocessor Free
    Thread Starter

    Done, the uninstall was greyed out. But that is all?
      My ComputerSystem Spec
  4.    29 Oct 2015 #4
    Join Date : Jun 2015
    Posts : 12,952
    Windows 10 Pro

    The network drivers were flagged, but Daemon tools drivers too.
    My thought is that Daemon tools was causing the crashes.

    If any BSOD occurs, please re-run the tool and upload the new zip file.
      My ComputersSystem Spec
  5.    30 Oct 2015 #5
    Join Date : Oct 2015
    Posts : 16
    Microsoft Windows 10 Pro 64 bites 14393 Multiprocessor Free
    Thread Starter

    Yesterday it happened again, I didn't noticed untill now:
    Attachment 45488
    I think that SPTD is somehow still installed, but the installer is still greyed out.
      My ComputerSystem Spec
  6.    30 Oct 2015 #6
    Join Date : Jun 2015
    Posts : 12,952
    Windows 10 Pro

    You're correct
    Code:
    *** WARNING: Unable to verify timestamp for sptd2.sys
    *** ERROR: Module load completed but symbols could not be loaded for sptd2.sys
    The driver is located at
    Code:
    c:\windows\system32\drivers\sptd2.sys
    Please try manually removing
    Move the file to another directory

    1. If there are problems, move the file back
    2. If there are no problems, delete the file
      My ComputersSystem Spec
  7.    30 Oct 2015 #7
    Join Date : Oct 2015
    Posts : 16
    Microsoft Windows 10 Pro 64 bites 14393 Multiprocessor Free
    Thread Starter

    I did it, but the system is unable to boot without it. The boot animation is starting, then BSOD occurs. It says INACCESSIBLE_BOOT_DEVICE.
    Even safe mode fails, I had to use command line to put back the file, to be able to start Windows.
      My ComputerSystem Spec
  8.    30 Oct 2015 #8
    Join Date : Jun 2015
    Posts : 12,952
    Windows 10 Pro



    Please show me the details of this driver
    Right click the file > properties > tab details > make a screenshot of this tab and post it.
      My ComputersSystem Spec
  9.    30 Oct 2015 #9
    Join Date : Oct 2015
    Posts : 16
    Microsoft Windows 10 Pro 64 bites 14393 Multiprocessor Free
    Thread Starter

    It's hungarian, i hope it is not a problem:
    Attachment 45516
      My ComputerSystem Spec
  10.    30 Oct 2015 #10
    Join Date : Jun 2015
    Posts : 12,952
    Windows 10 Pro

    It certainly is not a problem
    It states clearly, SCSI Pass Through Direct driver.
    But I am wondering why it is not removed by the SPTD remover, or the SPTD remover doesn't know this 1 yet.
    What has been modified/installed of programs on the 28th?
      My ComputersSystem Spec

 
Page 1 of 3 123 LastLast


Similar Threads
Thread Forum
Bsod Windows 10 Multiple Bsods Please Help
so in the log file there was also another bsod that was diffrent from these but i had to roolback windows so its gone but its was -page fault in nonpaged area i think the error code ended with 05 or something like that but i think its a ram problem...
BSOD Crashes and Debugging
BSOD loop on boot from fresh Win 10 upgrade over fresh Win 7 install
This is on an old eMachines M6805 laptop that originally came with XP 32-bit. I put a fresh install of Windows 7 32-bit on it which ran fine. I then upgraded that to Windows 10 32-bit. The first time it booted up I was able to log in but got a...
BSOD Crashes and Debugging
Solved Multiple BSODs in Windows 10
Hi All, I just registered in hope you can help me with my problem. Yesterday I upgraded from Windows 7 to Windows 10. In windows 7 I used to get BSODs about once a week. The really weird thing is that it was related to whenever I rebooted my...
BSOD Crashes and Debugging
How to do a fresh install of windows 10?
So i currently have 8.1 and i would like to reformat my Partition and do a clean install of windows 10. I have downloaded the windows 10 CD boot from here Windows 10 i have windows 8.1 home so i downloaded windows 10 home. And when i was doing the...
Installation and Upgrade
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 03:43.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums