Frequent BSOD Varied Error Messages

Page 1 of 2 12 LastLast

  1. Posts : 10
    Microsoft Windows 10 Home 64-bit
       #1

    Frequent BSOD Varied Error Messages


    Hello, this is a problem I have been having for about a month now. I have been running Windows 10 since July 29th.

    I am getting frequent BSODs, they seem unpredictable, I have noticed no pattern to them.

    My system will crash anytime, including during startup and any time after startup, even after a long period of normal usage. It will sometimes run into a loop of booting and failing to start up. Running applications may have an impact, however I can't be certain because it will sometimes crash while running no applications or idle. I have no startup applications enabled.

    The BSODs have had many different error messages, the variety of error messages seems to be increasing with time. It began with mostly the BAD_POOL_HEADER error and a few others. BAD_POOL_HEADER still seems to be the most frequent message.

    These are error messages I have recorded in the past three days, they are in order of when I saw them and had the time to record them, I may have missed a few.

    BAD_POOL_HEADER
    NO_MORE_IRP_STACK_LOCATIONS
    DRIVER_CORRUPTED_EXPOOL
    PAGE_FAULT_IN_NONPAGED_AREA
    SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
    BAD_SYSTEM_CONFIG_INFO
    SYSTEM_SERVICE_EXCEPTION
    PFN_LIST_CORRUPT
    IRQL_NOT_LESS OR_EQUAL
    KERNAL_SECURITY_CHECK_FAILURE
    INVALID_PROCESS_ATTACH_ATTEMPT
    KMODE_EXCEPTION_NOT_HANDLED
    MEMORY_MANAGEMENT
    0xc000021
    PROCESS1_INITIALIZATION_FAILED
    DRIVER_IQRL_NOT_LESS_OR_EQUAL
    CRITICAL_PROCESS_DIED
    ATTEMPTED_EXECUTE_OF_NONEXECUTE_MEMORY

    To me this looks like an excessive amount of errors.

    When these problems started I ran tests on my system, it failed a memory test, these are the results.

    Pre-boot System Assessment Build 4524
    Device: Memory
    Test: Ground Bounce Test
    Test Results: Fail
    Error Code: 2000-0123
    Msg: Memory - integrity test failed.

    I have run memory tests again as well as other system tests, all of them have passed with no failures.

    I have made sure to update Windows and all of my drivers whenever an update is available.

    I would really appreciate some help with this. I would like to know what any of this means, if I can fix it, what I can do to fix it or prevent further damage? I have uploaded the debug file, I have included all information I felt could be relevant, and I'd be happy to provide any additional information.
      My Computer


  2. Posts : 14,901
    Windows 10 Pro
       #2

    Hi Tyrejj,

    Welcome to the 10forums.

    Unfortunately, there are just 4 dump files of the several you mention.
    If you have removed the others with any method, please stop using the method while troubleshooting.

    What tests have you performed exactly?

    Please uninstall everything of Nvidia using Display Driver Uninstaller and install new drivers from Nvidia
    Code:
    *** WARNING: Unable to verify timestamp for nvlddmkm.sys
    *** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
    
    0: kd> lmvm nvlddmkm
    start             end                 module name
    fffff800`803e0000 fffff800`80ec8000   nvlddmkm T (no symbols)           
        Loaded symbol image file: nvlddmkm.sys
        Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
        Image name: nvlddmkm.sys
        Timestamp:        Thu Jul 23 02:15:19 2015 (55B03217)
        CheckSum:         00AAF49B
        ImageSize:        00AE8000
        Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
      My Computers


  3. Posts : 10
    Microsoft Windows 10 Home 64-bit
    Thread Starter
       #3

    Yeah I noticed that there weren't many minidump files, I haven't removed any of them, it doesn't look like the MEMORY.dmp file was collected, I can upload that file as well, it could contain more information.

    I used the Display Driver Uninstaller to uninstall NVIDIA. Windows Automatically reinstalled the drivers, so far I have not had another blue screen, but it hasn't been very long. Thank you, I'm really hopeful that was the solution, I was worried my hardware would need to be replaced.

    The tests I ran were just the tests that were available through my BIOS, I cant remember them specifically, I think there were about three different tests.

    EDIT

    Sorry, I spoke too soon, I'm still blue screening, Windows is crashing before it can start up.
      My Computer


  4. Posts : 14,901
    Windows 10 Pro
       #4

    The MEMORY.dmp file will every time be overwritten when you get a BSOD, this so these files won't take too much space as they'll get very large.
    It won't be needed to upload them, I have enough with minidumps
    The memory.dmp file is mostly used to find out how it is going wrong, but I am not yet familiair with that stuff. Thus is the what caused it part for me the most important what is usually in the minidumps founded.

    I was asking about the tests, because some crashes might refer to hardware problems, specific the memory.




    Diagnostic Test

     RAM TEST


    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note


    MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.
      My Computers


  5. Posts : 10
    Microsoft Windows 10 Home 64-bit
    Thread Starter
       #5

    Thank you, Memtest86+ has just completed its 11th pass and has found no errors.

    I have also noticed though that under cores it says I have one active core and one core total, my processor has two cores. This struck me as weird, will this affect the result of my test? I don't know if something was set wrong and I need to try this again or if this might indicate a problem.

    I was also asking about the MEMORY.dmp file because mine seems large, it's about 500,000 KB.
      My Computer


  6. Posts : 14,901
    Windows 10 Pro
       #6

    I don't think so. If I am correct, it could be changeable in the BIOS settings.

    That is a normal size for a memory.dmp file.
      My Computers


  7. Posts : 10
    Microsoft Windows 10 Home 64-bit
    Thread Starter
       #7

    Oh ok, I just wanted to make sure. Should I keep the test running and wait for an error?
      My Computer


  8. Posts : 14,901
    Windows 10 Pro
       #8

    Isn't needed as memtest has completed 11 passes.
    Please note in the BIOS the voltage and frequency of the memory and make sure it is compatible for both the memory and motherboard, also post them so I can check it.

    Please fill in your system specs
    Please follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely including PSU and cooling system.
    How to fill in your system specs:

      My Computers


  9. Posts : 10
    Microsoft Windows 10 Home 64-bit
    Thread Starter
       #9

    Ok, I've filled in my system specs, I didn't fill in cooling, I only have the fan cooling that was built into my system so I wasn't sure how to fill it in.

    My memory is DDR3, it's voltage is 1.50 V and it's frequency is 800 MHz. My motherboard is compatible with DDR3 RAM up to 1066 MHz.
      My Computer


  10. Posts : 14,901
    Windows 10 Pro
       #10

    Please set the frequency up to 1066Mhz
      My Computers


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 15:36.
Find Us




Windows 10 Forums