Page 1 of 2 12 LastLast
  1.    26 Oct 2015 #1
    Join Date : Oct 2015
    Posts : 10
    icrosoft Windows 10 Pro 64-bit 10240 Multiprocessor Free

    BSOD - Driver Power State Failure


    In a bit of a jam here,

    Currently I have windows 10 installed, although the problem was persisting even while I was using windows 7. The problems started when I ran out of space on my SSD and tried to bring files over to my other HDD for storage. In the end I threw my hands up and reformatted my Windows 7. And since my SSD was too small to keep everything on last time I decided to install windows on my HDD. After updating everything and so on my computer, again, decided to BSOD. So I upgraded to windows 10 and eventually it started doing the same thing. I've looked through my device manager and have not located any out of date drivers and I'm about to throw my pc out my window (not really).

    Needless too say I require some assistance, here is my log for review.

    Thank you for your time.
      My ComputerSystem Spec
  2.    27 Oct 2015 #2
    Join Date : Jun 2015
    Posts : 12,972
    Windows 10 Pro

    Hi Locke,

    Welcome to the 10forums.

    Please run SeaTools and chkdsk on your hard drive and only chkdsk on your SSD.



    BSOD - Driver Power State Failure Diagnostics Test BSOD - Driver Power State Failure
     HDD & SSD TEST

    Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums

    Note   Note
    Do not run SeaTools on an SSD as the results will be invalid.


    Run chkdsk Disk Check - Windows 7 Help Forums

    Running !irp on the 4th parameter shows a few Windows drivers that might point to the hard drive.
    Code:
    0: kd> !irp ffffe0008ffdd150
    Irp is active with 5 stacks 2 is current (= 0xffffe0008ffdd268)
     No Mdl: No System Buffer: Thread 00000000:  Irp stack trace.  
         cmd  flg cl Device   File     Completion-Context
     [  0, 0]   0  0 00000000 00000000 00000000-00000000    
    
                Args: 00000000 00000000 00000000 00000000
    >[ 16, 2]   0 e1 ffffe00090155060 00000000 fffff801070260d0-ffffe000903fe5a0 Success Error Cancel pending
               \Driver\atapi    CLASSPNP!ClasspPowerUpCompletion
                Args: 00000000 00000001 00000001 00000000
     [ 16, 2]   0 e1 ffffe000903fe060 00000000 fffff80106543850-00000000 Success Error Cancel pending
               \Driver\disk    partmgr!PmPowerCompletion
                Args: 00000000 00000001 00000001 00000000
     [ 16, 2]   0 e1 ffffe000903fd040 00000000 fffff8002957ed74-ffffe000933b35c0 Success Error Cancel pending
               \Driver\partmgr    nt!PopRequestCompletion
                Args: 00000000 00000001 00000001 00000000
     [  0, 0]   0  0 00000000 00000000 00000000-ffffe000933b35c0

    Old drivers
    Code:
    jraid        Tue Sep 07 04:37:00 2010     jraid.sys // RAID driver
    RTKVHD64        Tue Jan 04 12:48:55 2011         RTKVHD64.sys // Audio driver
    Update links
    ftp://driver.jmicron.com.tw/SATA_Controller/Windows/
    Realtek
      My ComputersSystem Spec
  3.    27 Oct 2015 #3
    Join Date : Oct 2015
    Posts : 10
    icrosoft Windows 10 Pro 64-bit 10240 Multiprocessor Free
    Thread Starter

    Thank you for the reply axe0,

    I've updated the drivers you suggested, and ran Seatools on my HDD and it came up clean. However when I ran dskchk on my SDD it said it required repair; Although there's nothing on the drive. But when I try to repair it it vanishes from existence and I cannot perform and further tests.. Very odd. Also I forgot to mention after my computer gets a BSOD and reboots, it tries to reboot via CD/DVD...even though my boot device is set to my HDD. Is there any way I can simply disable the drive to prevent further issues?
      My ComputerSystem Spec
  4.    27 Oct 2015 #4
    Join Date : Jun 2015
    Posts : 12,972
    Windows 10 Pro

    In the BIOS you should be able to remove the CD/DVD from the boot list if that is what you mean.
      My ComputersSystem Spec
  5.    27 Oct 2015 #5
    Join Date : Oct 2015
    Posts : 10
    icrosoft Windows 10 Pro 64-bit 10240 Multiprocessor Free
    Thread Starter

    Hey axe0,

    Good idea, when I went into the BIOS I noticed the boot sequence was still going from my SSD as the Primary, and since it's having errors (and it's also blank) that was why it was switching to CD/DVD as the secondary. What should I do to disable the SSD?

    Thank you so much for your time and patience, I really appreciate it.
      My ComputerSystem Spec
  6.    27 Oct 2015 #6
    Join Date : Jun 2015
    Posts : 12,972
    Windows 10 Pro

    Could you please post a screenshot of disk management?
    This so I know what we're working with.
      My ComputersSystem Spec
  7.    27 Oct 2015 #7
    Join Date : Oct 2015
    Posts : 10
    icrosoft Windows 10 Pro 64-bit 10240 Multiprocessor Free
    Thread Starter

    Here is the screenshot of my Disk Management. Strangely i got another BSOD a few minutes ago and even though i removed CD/DVD from the boot sequence it still attempted to boot that way..

    Also attached is my latest Dm report.
      My ComputerSystem Spec
  8.    27 Oct 2015 #8
    Join Date : Jun 2015
    Posts : 12,972
    Windows 10 Pro

    Format the SSD, if correct should it remove the SSD from the boot list.

    Please check your manufacturer of the motherboard for BIOS updates.




    BSOD - Driver Power State Failure Diagnostics Test BSOD - Driver Power State Failure
     System File Check

    Please try following:
    • Open an admin command prompt
    • Copy/paste "sfc/scannow" (without quotes) and press enter
    • When it finished reboot your system
    • Open again an admin command prompt
    • Enter sfc/scannow again

    If sfc/scannow does NOT say "Windows Resource Protection did not find any integrity violation" after the second SFC, please upload the cbs.log file located at {windows partition}\Windows\Logs\CBS\, if the file is too large try a 3rd party uploader like dropbox, onedrive, google drive, mediafire etc.
    System File Check(SFC a.k.a. Windows Resource Protection) needs to have your system rebooted in order for sfc to try to fix the problems that it finds.

    You might want to check your scheduled tasks.
    This comes back a lot in the event logs
    Event[5833]: Log Name: System
    Source: Microsoft-Windows-TaskScheduler
    Date: 2015-10-27T11:52:01.607
    Event ID: 414
    Task: Task Misconfiguration
    Level: Warning
    Opcode: Info
    Keyword: N/A
    User: S-1-5-18
    User Name: NT AUTHORITY\SYSTEM
    Computer: Locke
    Description:
    Task Scheduler service found a misconfiguration in the NT TASK\Microsoft\Windows\Media Center\DispatchRecoveryTasks definition. Additional Data: Error Value: %SystemRoot%\ehome\ehPrivJob.exe.
      My ComputersSystem Spec
  9.    27 Oct 2015 #9
    Join Date : Oct 2015
    Posts : 10
    icrosoft Windows 10 Pro 64-bit 10240 Multiprocessor Free
    Thread Starter

    As far as I can tell the drivers are up-to-date by looking at the list of drivers for my motherboard.

    SFC Did not find anything wrong, and i'm not sure what to do about the Task Scheduler, i looked up what task was scheduled around the time the log you posted and it was the GoogleUpdateTaskMachineCore and GoogleUpdateTaskMachineUA. So I disabled them while I ran the first SFC scan and I got a BSOD while the scan was being performed. So I rebooted and performed another scan, rebooted and performed the scan a second time, and found no violations.
      My ComputerSystem Spec
  10.    27 Oct 2015 #10
    Join Date : Jun 2015
    Posts : 12,972
    Windows 10 Pro

    Please run the DM Log Collector tool again for the new BSOD.

    How is the setup of your hard drives?

    Please fill in your system specs
    Please follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely including PSU and cooling system.
    How to fill in your system specs:

      My ComputersSystem Spec

 
Page 1 of 2 12 LastLast


Similar Threads
Thread Forum
Frequent BSOD (driver power state failure)
I used to had the dpc watchdog violation BSOD , but it was okay from quite days . but now i have another BSOD with error "driver power state failure" This usually happens when i am working on photoshop or illustrator, i lost my unsaved files...
BSOD Crashes and Debugging
BSOD: Driver power state failure, on wake up from sleep - since win 10
hello This is a problem with my Dad's PC, I am default tech support but this is beyond my knowledge. I don't have access to the PC all the time but have been going on with team viewer (thankfully, saves a long drive). BSOD: Driver power state...
BSOD Crashes and Debugging
BSOD Driver Power State Failure
Hey guys, Ever since I updated to windows 10, my computer automatically installs some Nvidia drivers from their servers. From past experience I know that my computer can get random BSOD's with the wrong Nvidia drivers installed (WinDBG always...
BSOD Crashes and Debugging
Solved BSOD Driver Power State Failure
Hi, First of all I would like to thank you for taking the time to view my thread, over the years I have found these type of forums to be very useful and appreciate the generosity of time and experience shown members.:) I recently upgraded my PC...
BSOD Crashes and Debugging
Solved BSOD driver power state failure 0x0000009f
Whenever I boot my pc for the first time I get this error but when my pc restarts from this error it works fine. 35565
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 08:03.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums