Page 2 of 4 FirstFirst 1234 LastLast
  1.    24 Oct 2015 #11
    Join Date : Oct 2015
    Posts : 18
    Microsoft Windows 10 Home 64-bit 10240 Multiprocessor Free
    Thread Starter

    The results of that test is as of follows:

    Error: 0x800f081f

    The source files could not be found.
    Use the "Source" option to specify the location of the files that are required to restore the feature.
      My ComputerSystem Spec
  2.    24 Oct 2015 #12
    Join Date : Oct 2013
    NW Florida
    Posts : 9,717
    Windows 10 Pro and Windows 10 Pro Insider

    Do you have an ISO or an installation USB? If you have an ISO mount it or inset the USB and tell me the drive letter Windows give it. Also look in the sources folder and tell me if you have an install.esd or an install.wim.
      My ComputersSystem Spec
  3.    24 Oct 2015 #13
    Join Date : Oct 2015
    Posts : 18
    Microsoft Windows 10 Home 64-bit 10240 Multiprocessor Free
    Thread Starter

    Sorry about the delay.. Needed some sleep

    I haven't set up an ISO or Installation USB as of yet.. But have been meaning to..

    Where abouts do I get the above and what are the instructions on how to set it up?
      My ComputerSystem Spec
  4.    24 Oct 2015 #14
    Join Date : Oct 2013
    NW Florida
    Posts : 9,717
    Windows 10 Pro and Windows 10 Pro Insider

    Download from Microsoft techbench (https://www.microsoft.com/en-US/soft...load/techbench) toward the bottom of the page you will select Windows 10, then keep answering the boxes to get the version you have installed. Download the file. In it will be an ISO file. Mount it by double clicking the ISO, the computer will give it a drive letter. I need to know that letter. Look inside and open the Sources folder and find either the install.esd or the install.wim file and tell me which you have. Don't do anything just look for the file. When I get the drive letter and whether you have an install.wim or .esd I will give you another command to run. I'll post it in the morning. It's close to time for me to get some sleep.
      My ComputersSystem Spec
  5.    24 Oct 2015 #15
    Join Date : Oct 2015
    Posts : 18
    Microsoft Windows 10 Home 64-bit 10240 Multiprocessor Free
    Thread Starter

    I have downloaded the files (both 32-bit and 64-bit as it said to download both of them).. I see no option on mounting the ISO (in the 64-bit one) but I can navigate into the zipped folder itself..

    In the sources folder (C:\Users\Home User\Downloads\Win10_English_x64.iso\sources\) I see the file/folder named install.wim.
      My ComputerSystem Spec
  6.    25 Oct 2015 #16
    Join Date : Oct 2013
    NW Florida
    Posts : 9,717
    Windows 10 Pro and Windows 10 Pro Insider

    Can you right click it and select Mount? It must be mounted if you can look in the sources folder. If it is mounted, look in the address bar and you should see a drive letter. See below
    Attachment 44543

    Attachment 44545

    Attachment 44546
      My ComputersSystem Spec
  7.    25 Oct 2015 #17
    Join Date : Oct 2015
    Posts : 18
    Microsoft Windows 10 Home 64-bit 10240 Multiprocessor Free
    Thread Starter

    I have uploaded some images.. I still see no option to mount anything..

    Attachment 44576Attachment 44577Attachment 44578Attachment 44579
      My ComputerSystem Spec
  8.    25 Oct 2015 #18
    Join Date : Oct 2015
    Posts : 18
    Microsoft Windows 10 Home 64-bit 10240 Multiprocessor Free
    Thread Starter

    Actually one thing I just noticed.. Last time I was opening the zip file (with 7zip) instead of opening it with windows explorer.. Opening it with windows explorer now gives that DVD Drive (H): address
      My ComputerSystem Spec
  9.    25 Oct 2015 #19
    Join Date : Oct 2013
    NW Florida
    Posts : 9,717
    Windows 10 Pro and Windows 10 Pro Insider

    OK, actually I forgot to tell you it comes in a .ZIP folder. You have to unzip it to get to the ISO file. Don't be too upset if this does not work. It should, but not everyone can run it for some reason. In theory it is supposed to replace / repair damaged system files by comparing your files to the original ISO file. That's a basic explanation.

    Right click the start button (flag) select command Prompt (Admin) Copy/paste this into the command window and press enter.
    Dism /Online /Cleanup-Image /RestoreHealth /Source:wim:H:\sources\install.wim:1 /limitaccess

    Again, it may take just a few minutes or a couple of hours. But, it will give a success or failure message.
      My ComputersSystem Spec
  10.    25 Oct 2015 #20
    Join Date : Oct 2015
    Posts : 18
    Microsoft Windows 10 Home 64-bit 10240 Multiprocessor Free
    Thread Starter

    The above command produced a success message

    Want me to re-run the scannow command to make sure that all is ok?
      My ComputerSystem Spec

 
Page 2 of 4 FirstFirst 1234 LastLast


Similar Threads
Thread Forum
Random BSOD
Heya guys, this is my first post here :). I just had like 3 or 4 BSODs in these last two days, never had any. I just updated my Atheros 8151 PCI-e driver from Network adapter->properties->update driver. I'm not sure if it is the cause, so I used...
BSOD Crashes and Debugging
BSOD on startup (mv91xx.sys, also previous store exception BSOD 3x)
I recently upgraded my htpc from 8.1 pro to Win 10 pro. I have had multiple BSOD since then. 4 were for store exception not handled and the last 2 were for kmode exception not handled mv91xx.sys. Please advise.
BSOD Crashes and Debugging
Random BSOD
every so often I get the kernel security check failure bsod. One point I wasn't running anything and it happened after boot. I added all my pc specs to my profile
BSOD Crashes and Debugging
Random BSOD
Hi there, I keep getting random BSOD errors. None of them have been them same. Ill attach the dump files. let me know what is wrong!! Thank you!!
BSOD Crashes and Debugging
Solved BSOD Seemingly Random when using PC normally. Variety of BSOD errors
Hi, Over the past couple of days I have been having reasonably frequent BSODs. Some have not created a dump file. I cant pinpoint anything in particular but it seems to be pointing to a driver issue but never identifies the driver from what I can...
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 18:29.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums