This has been going on for awhile and I cant seem to figure out the issue. I have turned off all C-State settings to fix the issue but there problem is still there.
Hi rallymewrx,
Welcome to the 10forums.
Please remove / disable items from the startup in taskmanager
These programs could interfere with the boot process giving you trouble and increase the boot time.
Please uninstall ASUS software and MSI Afterburner, these software is known for causing BSOD's.
As you are running Windows 10 Pro Insider Preview we cannot properly help you as the dumps aren't loaded correctly.
However, as the crashes are mostly 0x124 it is in most cases due to hardware failure.
Please run following tests.
The errors are 0x124 WHEA_UNCORRECTABLE_ERROR (Windows Hardware Error Architecture)
This means that there are problems with your hardware, but this error is also caused by overclocking or faulty drivers
Warning
If you're overclocking your system, revert back to stock clocks now.
Note
Test the system once the overclock is removed before continuing with the steps outlined below.
Part One: CPU Stress Test
Part Two: MemTest86+ RAM Diagnostic
Part Three: Hard Drive Diagnostics
Part Four: GPU Stress Test
Run Prime95 to stress test your CPU. Prime95 - Stress Test Your CPU - Windows 10 Forums
Your CPU temperatures will rise quickly while under this stress test. Keep a keen eye on them and abort the test if overheating occurs.
MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking forzero errors here. Even a single error will indicate RAM failure.
Do not run SeaTools on an SSD as the results will be invalid.
Run Furmark for around 30 minutes.
Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if overheating occurs.
Quote