BSOD playing random games : irql_not_less_or_equal


  1. Posts : 1
    Windows 10
       #1

    BSOD playing random games : irql_not_less_or_equal


    Hello,

    So I'm having BSOD issues for a while now. It can be one in 5 days or 5 in 1 hour. I'm kinda getting pissed with this situation therefore requesting for some help here.
    I ran Memtest 86 before upgrading to W10 months ago without any issue.
    Hope people can help.

    Attachment 43351
      My Computer


  2. Posts : 14,903
    Windows 10 Pro
       #2

    Hi PhoenixKami,

    Welcome to the 10forums.

    Unfortunately, I cannot properly check the files because I don't understand the descriptions.

    As you speak you can have several crashes in a day or 1 in days, but there are just 2 dump files in the attached zip file.
    Please check {windows partition}\windows\minidump and check if there are more dump files saved.
    Please make sure your pc is configured for small dump files How to configure minidump | Windows 10 tutorial.

    In 1 of the crashes the Nvidia Video driver has been flagged.
    Because this is a 0xA(IRQL_NOT_LESS_OR_EQUAL) crash where a read activity is, is this likely a memory problem.
    Code:
    IRQL_NOT_LESS_OR_EQUAL (a)
    An attempt was made to access a pageable (or completely invalid) address at an
    interrupt request level (IRQL) that is too high.  This is usually
    caused by drivers using improper addresses.
    If a kernel debugger is available get the stack backtrace.
    Arguments:
    Arg1: 0000000000000028, memory referenced
    Arg2: 0000000000000002, IRQL
    Arg3: 0000000000000000, bitfield :
        bit 0 : value 0 = read operation, 1 = write operation
        bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
    Arg4: fffff802c9f8f46d, address which referenced memory
    Code:
    *** WARNING: Unable to verify timestamp for nvlddmkm.sys
    *** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys



    Diagnostic Test

     RAM TEST


    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note


    MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.
      My Computers


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 07:02.
Find Us




Windows 10 Forums