Brand new Build. BSod CLock_Watchdog_Timeout and Freezes.

Page 4 of 15 FirstFirst ... 2345614 ... LastLast

  1. Posts : 75
    Windows 10
    Thread Starter
       #31

    something is definitely going on. It was 78F in my office a few minutes ago and after the last error I completely shut that machine down. The temp in has dropped significantly in the 20 minutes its been off.

    Could this be a bad power supply?
    Could the processor be bad even though it ran prime95 and passed the intel processor testing?

    Please help. I've invest $2k in this build and I am completely lost at what the hell is wrong with it. I've built several computers and never had these sort of issues.
      My Computer


  2. Posts : 14,903
    Windows 10 Pro
       #32

    44C for the CPU is really fine and I can't even reach that at idle. My minimum is around 55CC

    Please keep the test running and abort if the CPU reaches around 85C
      My Computers


  3. Posts : 75
    Windows 10
    Thread Starter
       #33

    Hi axe.
    Did you read my previous posts on bottom of page 3?

    passed prine95 twice.
    LR6 locks up in safe mode.
    had new errors
    please read those
      My Computer


  4. Posts : 14,903
    Windows 10 Pro
       #34

    At 6AM my time I read the posts yes.

    Do you have SATA/AHCI/something else in your BIOS enabled?
    https://www.tenforums.com/tutorials/2...tallation.html

    Please re-run the tool from the BSOD post instructions and upload the zip file.
      My Computers


  5. Posts : 75
    Windows 10
    Thread Starter
       #35

    BIOS:
    SATA enabled
    MODE AHCI
      My Computer


  6. Posts : 75
    Windows 10
    Thread Starter
       #36

    heres the new zip file
      My Computer


  7. Posts : 14,903
    Windows 10 Pro
       #37

    The dump is corrupted.




    Diagnostic test

     GPU TEST


    Run Furmark to test your GPU. Furmark tutorial

    Note   Note
    Run Furmark for around 30 minutes


    warning   Warning
    Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if temperatures rise too high





    Diagnostic Test

     RAM TEST


    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note


    MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.
      My Computers


  8. Posts : 75
    Windows 10
    Thread Starter
       #38

    What do you mean corrupted?
      My Computer


  9. Posts : 14,903
    Windows 10 Pro
       #39

    nosamk said:
    What do you mean corrupted?
    I cannot open the dump file properly as it should.
    If I run a command on 1 of the parameters I don't get the usual output, but the output of something not being able to load.
    This is most likely due to heavy hardware problems.

    For example, this is an output of what I get from another thread
    Code:
    1: kd> !errrec  fffe00184374028
    ===============================================================================
    Common Platform Error Record @ ffffe00184374028
    -------------------------------------------------------------------------------
    Record Id     : 01d100eefab7af93
    Severity      : Fatal (1)
    Length        : 928
    Creator       : Microsoft
    Notify Type   : Machine Check Exception
    Timestamp     : 10/7/2015 22:01:24 (UTC)
    Flags         : 0x00000000
    
    ===============================================================================
    Section 0     : Processor Generic
    -------------------------------------------------------------------------------
    Descriptor    @ ffffe001843740a8
    Section       @ ffffe00184374180
    Offset        : 344
    Length        : 192
    Flags         : 0x00000001 Primary
    Severity      : Fatal
    
    Proc. Type    : x86/x64
    Instr. Set    : x64
    Error Type    : Cache error
    Operation     : Data Read
    Flags         : 0x00
    Level         : 2
    CPU Version   : 0x00000000000306a9
    Processor ID  : 0x0000000000000001
    
    ===============================================================================
    Section 1     : x86/x64 Processor Specific
    -------------------------------------------------------------------------------
    Descriptor    @ ffffe001843740f0
    Section       @ ffffe00184374240
    Offset        : 536
    Length        : 128
    Flags         : 0x00000000
    Severity      : Fatal
    
    Local APIC Id : 0x0000000000000001
    CPU Id        : a9 06 03 00 00 08 10 01 - bf e3 9a 7f ff fb eb bf
                    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
                    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
    
    Proc. Info 0  @ ffffe00184374240
    
    ===============================================================================
    Section 2     : x86/x64 MCA
    -------------------------------------------------------------------------------
    Descriptor    @ ffffe00184374138
    Section       @ ffffe001843742c0
    Offset        : 664
    Length        : 264
    Flags         : 0x00000000
    Severity      : Fatal
    
    Error         : DCACHEL2_DRD_ERR (Proc 1 Bank 6)
      Status      : 0xbe20000000021136
      Address     : 0x000000008f2cec00
      Misc.       : 0x000000b041004086
    This is the output I get from your dump
    Code:
    4: kd> !errrec ffffe00042cf0028
    
    ===============================================================================
    Common Platform Error Record @ ffffe00042cf0028
    -------------------------------------------------------------------------------
    Signature     : *** INVALID ***
    Revision      : 0.0
    Record Id     : 0000000000000000
    Severity      : Recoverable (0)
    Length        : 0
    Creator       : {00000064-0000-0000-70d5-395133000000}
    Notify Type   : {00000064-0000-0000-70d5-395133000000}
    Flags         : 0x00000000
      My Computers


  10. Posts : 75
    Windows 10
    Thread Starter
       #40

    Is there something I need to do to make the dump work properly?

    I have furmark running. - 8 mins, no issues so far

    I ran memtest86+ last week for over 24 hours. went to 6 passes with no errors
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 05:13.
Find Us




Windows 10 Forums