BSOD power_driver_state_failure 0x0000009f on cold boot

Page 1 of 2 12 LastLast

  1. Posts : 12
    Windows 10
       #1

    BSOD power_driver_state_failure 0x0000009f on cold boot


    I'm getting this BSOD but only when I start the PC.
    Happens a few minutes after I've switched it on.
    After getting the BSOD and restarting, the PC will be fine for the rest of the day.
    Have tried all the usual things - updating drivers etc etc to no avail.

    Attaching the zip file of the dumps as required.

    Really hoping somebody can help me.

    Many thanks in advance!

    Update: Contrary to what I said in the thread's title, the PC is also giving me a BSOD coming out of sleep.
    Last edited by dingorob; 13 Oct 2015 at 09:43.
      My Computer


  2. Posts : 14,903
    Windows 10 Pro
       #2

    Hi dingorob,

    Welcome to the 10forums.

    Unfortunately, I cannot read some dumps, likely due to hardware damage as I found this
    Code:
    Probably caused by : memory_corruption
    Please run MemTest86+



    Diagnostic Test

     RAM TEST


    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note


    MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.
      My Computers


  3. Posts : 12
    Windows 10
    Thread Starter
       #3

    axe0 said:
    Unfortunately, I cannot read some dumps, likely due to hardware damage as I found this
    Code:
    Probably caused by : memory_corruption
    Please run MemTest86+
    Thanks for the quick reply, axe0.

    I will run memtest but as i said above, after the PC recovers, I have no issue with it for the rest of the day.
    I would have thought that if i had faulty memory, it would give me further errors at any time.
    Also, I had no issues running on the two memory sticks with windows 7 for 3+ years.
      My Computer


  4. Posts : 14,903
    Windows 10 Pro
       #4

    Hardware can fail suddenly after years of use.
    That it worked fine for a few years is not a reason that it is not a cause.
      My Computers


  5. Posts : 12
    Windows 10
    Thread Starter
       #5

    Ran memtest all night with no errors.

    Am attaching another zip. Hopefully you can read the dumps.

    Spent another 4 hours trying to fix this BSOD. Starting to drive me crazy tbh!

    Many thanks once again for any help.
      My Computer


  6. Posts : 14,903
    Windows 10 Pro
       #6

    The marked drivers are Windows drivers, this might point to the hard drive.
    Please test your hard drive(s)
    With SSD, don't run SeaTools but DO run chkdsk




    Diagnostics Test

     HDD & SSD TEST


    Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums

    Note   Note
    Do not run SeaTools on an SSD as the results will be invalid.


    Run chkdsk Disk Check - Windows 7 Help Forums

    Code:
    >[ 16, 2]   0 e1 ffffe00105bcf060 00000000 fffff800799360d0-ffffe00105da15a0 Success Error Cancel pending
               \Driver\atapi    CLASSPNP!ClasspPowerUpCompletion
                Args: 00000000 00000001 00000001 00000000
     [ 16, 2]   0 e1 ffffe00105da1060 00000000 fffff80078ba3850-00000000 Success Error Cancel pending
               \Driver\disk    partmgr!PmPowerCompletion
                Args: 00000000 00000001 00000001 00000000
     [ 16, 2]   0 e1 ffffe00105da0040 00000000 fffff80345b94d74-ffffe001072f10e0 Success Error Cancel pending
               \Driver\partmgr    nt!PopRequestCompletion
                Args: 00000000 00000001 00000001 00000000
     [  0, 0]   0  0 00000000 00000000 00000000-ffffe001072f10e0
      My Computers


  7. Posts : 12
    Windows 10
    Thread Starter
       #7

    axe0 said:
    Please test your hard drive(s)
    Done the tests. No errors.
      My Computer


  8. Posts : 14,903
    Windows 10 Pro
       #8

    Please try following:
    • Open an admin command prompt
    • Copy/paste "sfc/scannow" (without quotes) and press enter
    • When it finished reboot your system
    • Open again an admin command prompt
    • Enter sfc/scannow again

    If sfc/scannow does NOT say "Windows Resource Protection did not find any integrity violation" after the second SFC, please upload the cbs.log file located at {windows partition}\Windows\Logs\CBS\, if the file is too large try a 3rd party uploader like dropbox, onedrive, google drive, mediafire etc.
    System File Check(SFC a.k.a. Windows Resource Protection) needs to have your system rebooted in order for sfc to try to fix the problems that it finds.
      My Computers


  9. Posts : 12
    Windows 10
    Thread Starter
       #9

    axe0 said:
    "Windows Resource Protection did not find any integrity violation"
    SFC run and got the message above.
      My Computer


  10. Posts : 12
    Windows 10
    Thread Starter
       #10

    axe0, I'm going to try changing my sata settings in the bios from IDE to AHCI which I should have done before I installed the OS! I have another thread seeking advice about this. AHCI - Enable in Windows 8 and Windows 10 after Installation - Windows 10 Forums
    What do you think?
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 08:04.
Find Us




Windows 10 Forums