BSOD once a week with bug check code, 0x00000124

axe0 · 22 Nov 2015

You are probably not entirely able to use your computer normally, mainly depending on what you want to do.
In safe mode, barely a thing is loaded. You can run some programs, but then expect software crashes. If a program is running it happens that not everything can be loaded what causes the program crash.

If even 1 thing has been disabled the normal startup changes to selective startup.
If you check the tab services, check 'Hide Microsoft services' before you do anything, you can see what has been disabled.
Changing the services only affects the boot process, meaning it'll likely boot faster because less has to load.

rob909e · 27 Nov 2015

Well having my fingers crossed didn't help, yesterday my computer Blue Screened 0x0124 while I was compressing a movies audio track with Audacity. Went to export the compressed result and while it was exporting, I went to grab a drink from the fridge, about a minute later when I got back, it was sitting at the dreaded blue frowny face, with the WHEA_Uncorrectable_Error message. Here is the latest zip.

axe0 · 27 Nov 2015

There we go, finally some drivers :)
Please update Paragon or remove it while troubleshooting.
Please check Broadcom for network driver updates: Driver Reference Table - k57nd60a.sys
Please uninstall everything of AMD using Display Driver Uninstaller and install new drivers from AMD. Be sure to ONLY install the drivers using custom/advanced options.

Code:

ffffd000`461b6b78  fffff801`32cfb428Unable to load image gpt_loader.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for gpt_loader.sys
*** ERROR: Module load completed but symbols could not be loaded for gpt_loader.sys
 gpt_loader+0xb428
5: kd> lmvm gpt_loader
start             end                 module name
fffff801`32cf0000 fffff801`32d01000   gpt_loader T (no symbols)           
    Loaded symbol image file: gpt_loader.sys
    Image path: gpt_loader.sys
    Image name: gpt_loader.sys
    Timestamp:        Fri Nov 14 15:54:12 2014 (54661794)
    CheckSum:         000120DB
    ImageSize:        00011000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

ffffd000`461b6b88  fffff801`32ce3c0c*** WARNING: Unable to verify timestamp for apmwin.sys
*** ERROR: Module load completed but symbols could not be loaded for apmwin.sys
 apmwin+0x3c0c
5: kd> lmvm apmwin
start             end                 module name
fffff801`32ce0000 fffff801`32cf0000   apmwin   T (no symbols)           
    Loaded symbol image file: apmwin.sys
    Image path: apmwin.sys
    Image name: apmwin.sys
    Timestamp:        Fri Nov 14 15:53:52 2014 (54661780)
    CheckSum:         0000D8AF
    ImageSize:        00010000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

ffffd000`461b68d8  fffff801`35c13524Unable to load image k57nd60a.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for k57nd60a.sys
*** ERROR: Module load completed but symbols could not be loaded for k57nd60a.sys
 k57nd60a+0x43524
5: kd> lmvm k57nd60a
start             end                 module name
fffff801`35bd0000 fffff801`35c42000   k57nd60a T (no symbols)           
    Loaded symbol image file: k57nd60a.sys
    Image path: k57nd60a.sys
    Image name: k57nd60a.sys
    Timestamp:        Wed Oct 30 08:14:03 2013 (5270B1BB)
    CheckSum:         0007BE28
    ImageSize:        00072000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

ffffd000`461b5fd8  fffff801`339e2e96Unable to load image atikmpag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
 atikmpag+0x12e96
ffffd000`461b5c78  fffff801`36a3fd49Unable to load image atikmdag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
 atikmdag+0x5fd49
5: kd> lmvm atikmpag
start             end                 module name
fffff801`339d0000 fffff801`33a79000   atikmpag T (no symbols)           
    Loaded symbol image file: atikmpag.sys
    Image path: atikmpag.sys
    Image name: atikmpag.sys
    Timestamp:        Wed Nov 18 07:55:08 2015 (564C20CC)
    CheckSum:         000AFA19
    ImageSize:        000A9000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
5: kd> lmvm atikmdag
start             end                 module name
fffff801`369e0000 fffff801`37ef4000   atikmdag T (no symbols)           
    Loaded symbol image file: atikmdag.sys
    Image path: atikmdag.sys
    Image name: atikmdag.sys
    Timestamp:        Wed Nov 18 08:18:34 2015 (564C264A)
    CheckSum:         014AC40D
    ImageSize:        01514000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

rob909e · 27 Nov 2015

What's Paragon? I'm not sure how to update or remove it because I've never heard of it? Also, When you say update broadcom, do you mean the builtin network adapter on my ASRock Motherboard? If so, shouldn't I use the network driver on my motherboards wetsite?

I'm thinking I might start over, fresh install of Windows 10 64. What drivers should I use for my mobo from my mobo site ASRock > Z77 Extreme6

Attachment 50796
Should I take out my Graphics Card and install windows with just my onboard graphics from my intel 3770k? I've never done this, so maybe it might be better to do this and once the OS is updated, then install the AMD 7950 graphics card and drivers.

I also made a zip file somewhere in this thread, it shows EVERY option within my BIOS. should I disable/enable/set something before installing windows 10? Knowing my situation, what do you recommend?

axe0 · 27 Nov 2015

The driver related to paragon that I mean:
Driver Reference Table - gpt_loader.sys

A network card is always on the motherboard, but why do you think I mention to use a different site? :)
The network card is made by, in your case, Realtek. With desktops only install the drivers from the manufacturer of the component.
The mainboard manufacturer doesn't offer driver updates for the network card.

Always, unless specific specified which one not, install every driver for the motherboard.
Without any of the drivers, the parts won't work.

I'm not answering your last question, because it is a choice you should make. It doesn't actually matter, because Windows will use its own built-in graphics drivers until the graphics drivers have been installed.

rob909e · 28 Nov 2015

Seems that these new driver issues arose after restoring my PC from a system image due to driver verifier causing Windows not to boot.

Could my monitor's cable that connects the PC to the monitor be causing the BSOD? My monitor is a a LG LED 22EA53 on the back on the monitor there are two possible connections, D-Sub and DVI-D. I'm using a cable with one end HDMI, that plugs into my AMD 7950 Graphics card, and the other end of the cable is a connected to the DVI-D input on the monitor.

Since I have 2 drives, 1 Samsung 950 500gb SSD(Operating system) and 1 WD 1TB HD(Data), if I were to start over from scratch, would I have to unhook the SATA connectors for the HD(Data) while installing windows on my SSD(Operating system)? I ask this because, in the past, I could not install Windows 7 or 8 if both drives were hooked up to the sata ports on the motherboard at the same time.

rob909e · 28 Nov 2015

Wait. You said my network card is made by Realtek? I though it was made by Broadcom? Either way, the link you supplied to update it didn't give me any drivers to download.

I uninstalled ALL AMD drivers, then ran DDU in safe mode, I downloaded AMD's new Crimson drivers Desktop
and out of the two new install options, i chose to use AMD minimal setup option. I also updated the INF and ME motherboard drivers. I uninstalled the older realtek audio drivers, and when I rebooted, windows already download and installed their version of the audio drivers, which work. I find that weird considering under control panel/system/advanced system settings Hardware tab/ Device installation settings - I have the options checked for, let me choose what to do, and Never install drivers from windows update.

rob909e · 06 Dec 2015

Well, an update: My Computer hasn't blue screen 0x0124 for almost a week. I guess Windows 10 had a major update, when I went to apply the new update, windows restarted about three times and the update installed correctly. However, I still have the revert back to Windows 7 option in my control panel. Is this normal, Or maybe, the OS isn't installed right, which is the causing the once a week blue screens. Here is the pick, does this seem right considering I've had Windows 10 on here for well over 4 months.

Attachment 52299

rob909e · 06 Dec 2015

BSOD 0x0124 while playing Fallout 4. Here is the latest Dmlog

Also here is a report from AIDA64 Maybe it shows something

axe0 · 06 Dec 2015

Please uninstall everything of AMD using Display Driver Uninstaller and install new drivers from AMD. Be sure to ONLY install the drivers using custom/advanced options.

Code:

ffffd001`bb9dee18  fffff801`4e0630d2Unable to load image atikmpag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
 atikmpag+0x130d2
1: kd> lmvm atikmdag
start             end                 module name
fffff801`50630000 fffff801`51d77000   atikmdag T (no symbols)           
    Loaded symbol image file: atikmdag.sys
    Image path: atikmdag.sys
    Image name: atikmdag.sys
    Timestamp:        Sun Nov 29 21:51:24 2015 (565B654C)
    CheckSum:         016DC5BB
    ImageSize:        01747000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

Let me know how it goes.