Windows 10: Rebooted from bugcheck, W10/pro x64 Solved

Page 1 of 2 12 LastLast
  1.    10 Oct 2015 #1

    Rebooted from bugcheck, W10/pro x64

    This is something new. I figured it was a reboot from an OS update. But when I checked my update settings, I have notify for update, not automatic update set. My event log said there was a reboot from a bugcheck about 1130pm last night (while the PC was unattended). My PC runs 24/7.

    Asus P8Z68V-pro
    16 GB ram
    256GB SSD for OS and programs
    1GB data drive
    2GB internal backup drive
    3GB external backup drive
    Win 10 pro x64

    I'd appreciate some help identifying the culprit here.

      My ComputersSystem Spec

  2. axe0's Avatar
    Posts : 13,723
    Windows 10 Pro
       10 Oct 2015 #2

    Hi speedlever,

    The crash is a 0x12B(FAULTY_HARDWARE_CORRUPTED_PAGE) which is usually caused by memory.
    Please test your memory using MemTest86+ to be sure it is fine.

    Rebooted from bugcheck, W10/pro x64 Diagnostic Test Rebooted from bugcheck, W10/pro x64

    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note

    MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.
      My ComputersSystem Spec

  3.    10 Oct 2015 #3

    Thanks axe0. Just burned a v5.01 cd and will test now.
      My ComputersSystem Spec

  4.    10 Oct 2015 #4

    Ok, 3+ hours into running memtest+86 v5.01 and no errors to report yet. Still on pass 1 though.

    8+ hours, 3rd pass. No errors yet.
    Last edited by speedlever; 10 Oct 2015 at 16:00.
      My ComputersSystem Spec

  5.    11 Oct 2015 #5

    I left Memtest+86 running for just over 24 hours and 9 passes. No errors were found.

    Any other thoughts?
      My ComputersSystem Spec

  6. axe0's Avatar
    Posts : 13,723
    Windows 10 Pro
       11 Oct 2015 #6

    Please check the BIOS for the RAM frequenty and check if it is supported by the motherboard.
    In case it is, please test the hard drive

    Rebooted from bugcheck, W10/pro x64 Diagnostics Test Rebooted from bugcheck, W10/pro x64

    Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums

    Note   Note
    Do not run SeaTools on an SSD as the results will be invalid.

    Run chkdsk Disk Check - Windows 7 Help Forums
      My ComputersSystem Spec

  7.    11 Oct 2015 #7

    The ram freq should be good. I set it all up several years ago when I built this PC and it has been running fine for a long time. IIRC, I used the XMP profile when I set it up.

    I can run a chkdsk /r next time I boot if you think that will help. (My OS/programs drive is a 256GB SSD).

    The ram is a matched set of 4x4GB G.Skill:

      My ComputersSystem Spec

  8. axe0's Avatar
    Posts : 13,723
    Windows 10 Pro
       12 Oct 2015 #8

    Please fill in your system specs
    Please follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.
    How to fill in your system specs:

      My ComputersSystem Spec

  9.    12 Oct 2015 #9

    System specs completed.
      My ComputersSystem Spec

  10. axe0's Avatar
    Posts : 13,723
    Windows 10 Pro
       12 Oct 2015 #10

    Thank you.

    Please run chkdsk /r to rule out the hard drive(s)
      My ComputersSystem Spec

Page 1 of 2 12 LastLast

Related Threads
Hello, I have had this problem since day one with windows 10 and its about to force me back to windows 7. Random times when working on my laptop it will just freeze. If there is something playing be it music or youtube it will make a god awful...
Dear all, I have an odd issue with my laptop since upgrading to Windows 10. The first time I boot I cannot connect to my home Wifi, however when I reboot I can. It is always the same every time I switch it on in that it will only connect on the...
Solved Help needed in debugging bugcheck: 0xC000021a' in BSOD Crashes and Debugging
My Windows 10 system continues to 'blue screen' with the bugcheck: 0xC000021a at startup and then will come up after a subsequent press of the restart button (I turned off 'automatic restart'). I installed Whocrashed to provide me with some...
BSOD on Startup. The bugcheck was: 0x0000001e in BSOD Crashes and Debugging
Hi, I received a BSOD on startup on the 7th of August at 6:57 pm. I have been trying to look into why this has happened but couldn't find out. Could you please help me find out the cause of the BSOD and how to fix it?
I couldn't find any tutorial or help in the search utility can anyone help me?
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 05:27.
Find Us