Page_fault_in_nonpaged_area (cpuz137_x32.sys)

Glorfindel · 22 Oct 2014

I can't copy the dumps, however, I did get that BSOD program running and got them that way. Here is the info: Attachment 7343
Attachment 7344

Glorfindel · 22 Oct 2014

The problem seems to have magically fixed itself too

EDIT: It just bluescreened

usasma · 23 Oct 2014

Why can't you copy the dumps? What error messages does it give you when you try?

Thank you for the reports!

I think that the most likely problem is the CPU-Z driver. Those errors were primarily on the 17 and 19 of October.
We will need to see if they continue to show up in the memory dumps.

Beyond that, I suspect the age of your BIOS is a large problem. With the release of Win8, the tie-in between the BIOS and the OS became very important - and we find that older systems cannot handle this tie-in, which results in Windows problems (such as BSOD's). Add to this the fact that the OS is still in the early beta stages - and it's a recipe for problems.

In short, if we can't fix it with removing the CPU-Z, then it's likely that the system won't handle Win10. As such I'd have to suggest that you abandon it (at least for the time being).

Good luck!

Glorfindel · 23 Oct 2014

I will try to get the dumps again , how would I go about removing the CPU-Z? I moved it someware else and the system created a new one.
EDIT: Here they are: Attachment 7373 These are all the dumps in the minidump folder.

usasma · 23 Oct 2014

All of them blame CPU-Z, so try this:

1) Create a Restore Point using System Restore
2) Create a Repair disc (Recovery Drive in Win8.1):
Win 7 - Go to Start...All Programs...Maintenance...Create a System Repair Disc
Win 8 - Press "WIN" and "R" to open the Run dialog...type "RECDISC" (without the quotes) and press ENTER
Win 8.1 - Go to the Start Screen and type in "recoverydrive" (one word, without the quotes). That will start the recovery drive process. You will need a USB drive of at least 512 mB - and all data will be erased off of it. If copying the recovery partition the drive size will be much, much larger (16 - 32 gB drive required).
Win 10 - The process will likely be similar to Win8/8.1
3) Test the System Repair disc/Recovery Drive to make sure that you can get to the System Restore entry when you boot from the disk/drive (you may also want to try actually using System Restore to make sure that it works)
4) Download this free program (Autoruns for Windows) and use it to disable any instances of cpuz137_x32.sys that are starting (or any other CPU-Z entries) (DO NOT DELETE - only disable by removing the checkmark in the left hand column)
5) Check in Device Manager (to include showing hidden devices from the View menu item) and ensure that any instances of cpuz137_x32.sys (or any other CPU-Z entries) are "Uninstalled" (DO NOT DISABLE THESE).
6) Check in the Services applet (services.msc) to be sure any instances of cpuz137_x32.sys or any other CPU-Z entries are disabled.
7) EXPERIMENTAL STEP (only try if you're certain of your abilities - I have not tried this step myself). Search the registry (use regedit.exe) to locate any entries that have the driver name (cpuz137_x32.sys) or the program name (CPU-Z). Delete these keys (it's advisable to back them up first - but you've also backed up the entire registry when creating a System Restore point in step 1. Alternatively, you can set the values in these keys to DISABLED (but the "how" of this is beyond the scope of this).
8) Go to C:\Windows\TEMP\cpuz137\ and rename the cpuz137_x32.sys driver to cpuz137_x32.BAD .

In the event that the system doesn't boot:

1) Boot from the System Repair disc/Recovery Drive and use the Command Prompt option to rename cpuz137_x32.BAD to cpuz137_x32.sys

Code:

ren C:\Windows\TEMP\cpuz137\cpuz137_x32.BAD C:\Windows\TEMP\cpuz137\cpuz137_x32.sys

21) Boot from the System Repair disc/Recovery Drive and use the System Restore option to restore the system to a point before the changes were made.

Good luck!

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

SMSCirda.sys Wed Apr 25 09:32:41 2007 (462F5879)
SMSC Fast Infrared Driver
http://www.carrona.org/drivers/driver.php?id=SMSCirda.sys

VSTCNXT3.SYS Wed Oct 15 20:29:13 2008 (48F68AD9)
Conexant SoftK56 Modem Driver
http://www.carrona.org/drivers/driver.php?id=VSTCNXT3.SYS

VSTAZL3.SYS Wed Oct 15 20:30:03 2008 (48F68B0B)
Conexant SoftK56 Modem
http://www.carrona.org/drivers/driver.php?id=VSTAZL3.SYS

VSTDPV3.SYS Wed Oct 15 20:32:04 2008 (48F68B84)
Conexant SoftK56 Modem Driver
http://www.carrona.org/drivers/driver.php?id=VSTDPV3.SYS

oz776.sys Tue Sep 8 22:10:13 2009 (4AA70E85)
O2Micro USB Smart Card Reader
http://www.carrona.org/drivers/driver.php?id=oz776.sys

netwlv32.sys Mon Aug 16 10:26:04 2010 (4C694A7C)

netwlv32.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

DigiartyVirtualCDBus.sys Wed Sep 7 00:02:56 2011 (4E66ECF0)

DigiartyVirtualCDBus.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

Analysis:
The following is for informational purposes only.

Code:

**************************Wed Oct 22 22:28:56.765 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\102214-29781-01.dmp]
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Windows 8 Kernel Version 9841 MP (2 procs) Free x86 compatible
Built by: 9841.0.x86fre.fbl_release.140912-1613
System Uptime:1 days 0:36:32.466
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
*** WARNING: Unable to verify timestamp for cpuz137_x32.sys
*** ERROR: Module load completed but symbols could not be loaded for cpuz137_x32.sys
Probably caused by :cpuz137_x32.sys ( cpuz137_x32+13ac )
BugCheck 50, {ffffffd1, 0, b8ab13ac, 0}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Arguments: 
Arg1: ffffffd1, memory referenced.
Arg2: 00000000, value 0 = read operation, 1 = write operation.
Arg3: b8ab13ac, If non-zero, the instruction address which referenced the bad memory
    address.
Arg4: 00000000, (reserved)
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
FAILURE_BUCKET_ID: WRONG_SYMBOLS
CPUID:        "Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz"
MaxSpeed:     2000
CurrentSpeed: 1995
  BIOS Version                  A04
  BIOS Release Date             10/13/2006
  Manufacturer                  Dell Inc.
  Product Name                  Latitude D820                   
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Tue Oct 21 21:35:34.454 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\102114-24828-01.dmp]
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Windows 8 Kernel Version 9841 MP (2 procs) Free x86 compatible
Built by: 9841.0.x86fre.fbl_release.140912-1613
System Uptime:2 days 0:04:03.153
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
*** WARNING: Unable to verify timestamp for cpuz137_x32.sys
*** ERROR: Module load completed but symbols could not be loaded for cpuz137_x32.sys
Probably caused by :cpuz137_x32.sys ( cpuz137_x32+13ac )
BugCheck 50, {ffffffd1, 0, a4f513ac, 0}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Arguments: 
Arg1: ffffffd1, memory referenced.
Arg2: 00000000, value 0 = read operation, 1 = write operation.
Arg3: a4f513ac, If non-zero, the instruction address which referenced the bad memory
    address.
Arg4: 00000000, (reserved)
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
FAILURE_BUCKET_ID: WRONG_SYMBOLS
CPUID:        "Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz"
MaxSpeed:     2000
CurrentSpeed: 1995
  BIOS Version                  A04
  BIOS Release Date             10/13/2006
  Manufacturer                  Dell Inc.
  Product Name                  Latitude D820                   
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Sun Oct 19 21:30:48.760 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\101914-28890-01.dmp]
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Windows 8 Kernel Version 9841 MP (2 procs) Free x86 compatible
Built by: 9841.0.x86fre.fbl_release.140912-1613
System Uptime:0 days 0:03:34.460
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
*** WARNING: Unable to verify timestamp for cpuz137_x32.sys
*** ERROR: Module load completed but symbols could not be loaded for cpuz137_x32.sys
Probably caused by :cpuz137_x32.sys ( cpuz137_x32+13ac )
BugCheck 50, {ffffffd1, 0, ac5f13ac, 0}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Arguments: 
Arg1: ffffffd1, memory referenced.
Arg2: 00000000, value 0 = read operation, 1 = write operation.
Arg3: ac5f13ac, If non-zero, the instruction address which referenced the bad memory
    address.
Arg4: 00000000, (reserved)
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
FAILURE_BUCKET_ID: WRONG_SYMBOLS
CPUID:        "Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz"
MaxSpeed:     2000
CurrentSpeed: 1995
  BIOS Version                  A04
  BIOS Release Date             10/13/2006
  Manufacturer                  Dell Inc.
  Product Name                  Latitude D820                   
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Sat Oct 18 20:52:15.466 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\101814-36781-01.dmp]
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Windows 8 Kernel Version 9841 MP (2 procs) Free x86 compatible
Built by: 9841.0.x86fre.fbl_release.140912-1613
System Uptime:0 days 0:03:52.168
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
*** WARNING: Unable to verify timestamp for cpuz137_x32.sys
*** ERROR: Module load completed but symbols could not be loaded for cpuz137_x32.sys
Probably caused by :cpuz137_x32.sys ( cpuz137_x32+13ac )
BugCheck 50, {ffffffd1, 0, b32c13ac, 0}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Arguments: 
Arg1: ffffffd1, memory referenced.
Arg2: 00000000, value 0 = read operation, 1 = write operation.
Arg3: b32c13ac, If non-zero, the instruction address which referenced the bad memory
    address.
Arg4: 00000000, (reserved)
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
FAILURE_BUCKET_ID: WRONG_SYMBOLS
CPUID:        "Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz"
MaxSpeed:     2000
CurrentSpeed: 1995
  BIOS Version                  A04
  BIOS Release Date             10/13/2006
  Manufacturer                  Dell Inc.
  Product Name                  Latitude D820                   
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Sat Oct 18 08:52:41.474 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\101814-23703-01.dmp]
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Windows 8 Kernel Version 9841 MP (2 procs) Free x86 compatible
Built by: 9841.0.x86fre.fbl_release.140912-1613
System Uptime:0 days 0:03:33.174
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
*** WARNING: Unable to verify timestamp for cpuz137_x32.sys
*** ERROR: Module load completed but symbols could not be loaded for cpuz137_x32.sys
Probably caused by :cpuz137_x32.sys ( cpuz137_x32+13ac )
BugCheck 50, {ffffffd1, 0, b63413ac, 0}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Arguments: 
Arg1: ffffffd1, memory referenced.
Arg2: 00000000, value 0 = read operation, 1 = write operation.
Arg3: b63413ac, If non-zero, the instruction address which referenced the bad memory
    address.
Arg4: 00000000, (reserved)
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
FAILURE_BUCKET_ID: WRONG_SYMBOLS
CPUID:        "Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz"
MaxSpeed:     2000
CurrentSpeed: 1995
  BIOS Version                  A04
  BIOS Release Date             10/13/2006
  Manufacturer                  Dell Inc.
  Product Name                  Latitude D820                   
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Fri Oct 17 18:50:53.893 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\101814-28312-01.dmp]
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Windows 8 Kernel Version 9841 MP (2 procs) Free x86 compatible
Built by: 9841.0.x86fre.fbl_release.140912-1613
System Uptime:0 days 0:03:09.593
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
*** WARNING: Unable to verify timestamp for cpuz137_x32.sys
*** ERROR: Module load completed but symbols could not be loaded for cpuz137_x32.sys
Probably caused by :cpuz137_x32.sys ( cpuz137_x32+13ac )
BugCheck 50, {ffffffd1, 0, b6e413ac, 0}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Arguments: 
Arg1: ffffffd1, memory referenced.
Arg2: 00000000, value 0 = read operation, 1 = write operation.
Arg3: b6e413ac, If non-zero, the instruction address which referenced the bad memory
    address.
Arg4: 00000000, (reserved)
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
FAILURE_BUCKET_ID: WRONG_SYMBOLS
CPUID:        "Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz"
MaxSpeed:     2000
CurrentSpeed: 1995
  BIOS Version                  A04
  BIOS Release Date             10/13/2006
  Manufacturer                  Dell Inc.
  Product Name                  Latitude D820                   
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Thu Oct 16 21:44:33.840 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\101614-26718-01.dmp]
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Windows 8 Kernel Version 9841 MP (2 procs) Free x86 compatible
Built by: 9841.0.x86fre.fbl_release.140912-1613
System Uptime:0 days 0:33:40.541
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
*** WARNING: Unable to verify timestamp for cpuz137_x32.sys
*** ERROR: Module load completed but symbols could not be loaded for cpuz137_x32.sys
Probably caused by :cpuz137_x32.sys ( cpuz137_x32+13ac )
BugCheck 50, {ffffffd1, 0, b6cb13ac, 0}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Arguments: 
Arg1: ffffffd1, memory referenced.
Arg2: 00000000, value 0 = read operation, 1 = write operation.
Arg3: b6cb13ac, If non-zero, the instruction address which referenced the bad memory
    address.
Arg4: 00000000, (reserved)
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
FAILURE_BUCKET_ID: WRONG_SYMBOLS
CPUID:        "Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz"
MaxSpeed:     2000
CurrentSpeed: 1995
  BIOS Version                  A04
  BIOS Release Date             10/13/2006
  Manufacturer                  Dell Inc.
  Product Name                  Latitude D820                   
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Thu Oct 16 21:09:59.697 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\101614-31906-01.dmp]
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Windows 8 Kernel Version 9841 MP (2 procs) Free x86 compatible
Built by: 9841.0.x86fre.fbl_release.140912-1613
System Uptime:0 days 0:17:10.398
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
*** WARNING: Unable to verify timestamp for cpuz137_x32.sys
*** ERROR: Module load completed but symbols could not be loaded for cpuz137_x32.sys
Probably caused by :cpuz137_x32.sys ( cpuz137_x32+13ac )
BugCheck 50, {ffffffd1, 0, b73f13ac, 0}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Arguments: 
Arg1: ffffffd1, memory referenced.
Arg2: 00000000, value 0 = read operation, 1 = write operation.
Arg3: b73f13ac, If non-zero, the instruction address which referenced the bad memory
    address.
Arg4: 00000000, (reserved)
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
FAILURE_BUCKET_ID: WRONG_SYMBOLS
CPUID:        "Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz"
MaxSpeed:     2000
CurrentSpeed: 1995
  BIOS Version                  A04
  BIOS Release Date             10/13/2006
  Manufacturer                  Dell Inc.
  Product Name                  Latitude D820                   
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Thu Oct 16 20:30:23.118 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\101614-41140-01.dmp]
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Windows 8 Kernel Version 9841 MP (2 procs) Free x86 compatible
Built by: 9841.0.x86fre.fbl_release.140912-1613
System Uptime:1 days 22:31:02.490
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
*** WARNING: Unable to verify timestamp for cpuz137_x32.sys
*** ERROR: Module load completed but symbols could not be loaded for cpuz137_x32.sys
Probably caused by :cpuz137_x32.sys ( cpuz137_x32+13ac )
BugCheck 50, {ffffffd1, 0, a80013ac, 0}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Arguments: 
Arg1: ffffffd1, memory referenced.
Arg2: 00000000, value 0 = read operation, 1 = write operation.
Arg3: a80013ac, If non-zero, the instruction address which referenced the bad memory
    address.
Arg4: 00000000, (reserved)
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
FAILURE_BUCKET_ID: WRONG_SYMBOLS
CPUID:        "Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz"
MaxSpeed:     2000
CurrentSpeed: 1995
  BIOS Version                  A04
  BIOS Release Date             10/13/2006
  Manufacturer                  Dell Inc.
  Product Name                  Latitude D820                   
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``

3rd Party Drivers:
The following is for information purposes only.
Any drivers in red should be updated or removed from your system. And should have been discussed in the body of my post.

Code:

**************************Wed Oct 22 22:28:56.765 2014 (UTC - 4:00)**************************
SMSCirda.sys                Wed Apr 25 09:32:41 2007 (462F5879)
VSTCNXT3.SYS                Wed Oct 15 20:29:13 2008 (48F68AD9)
VSTAZL3.SYS                 Wed Oct 15 20:30:03 2008 (48F68B0B)
VSTDPV3.SYS                 Wed Oct 15 20:32:04 2008 (48F68B84)
oz776.sys                   Tue Sep  8 22:10:13 2009 (4AA70E85)
netwlv32.sys                Mon Aug 16 10:26:04 2010 (4C694A7C)
GEARAspiWDM.sys             Thu May  3 15:55:59 2012 (4FA2E2CF)
b57nd60x.sys                Mon Mar 25 20:14:58 2013 (5150E882)
MpKsl1cfda53b.sys           Wed Aug 21 18:32:05 2013 (52153FE5)
MpKsl6cd92f91.sys           Wed Aug 21 18:32:05 2013 (52153FE5)
MpKslcd94ed95.sys           Wed Aug 21 18:32:05 2013 (52153FE5)
cpuz137_x32.sys             Mon Feb 17 09:21:57 2014 (53021B05)
ntosext.sys                 Fri Sep 12 21:21:29 2014 (54139C19)
intelppm.sys                Fri Sep 12 21:21:33 2014 (54139C1D)
win32kbase.sys              Fri Sep 12 23:16:09 2014 (5413B6F9)
win32kfull.sys              Fri Sep 12 23:16:27 2014 (5413B70B)
CEA.sys                     Fri Sep 12 23:17:25 2014 (5413B745)
clipsp.sys                  Fri Sep 12 23:17:41 2014 (5413B755)
mmcss.sys                   Fri Sep 12 23:17:42 2014 (5413B756)
intelide.sys                Fri Sep 12 23:18:22 2014 (5413B77E)
cmimcext.sys                Fri Sep 12 23:18:37 2014 (5413B78D)
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Sat Oct 18 20:52:15.466 2014 (UTC - 4:00)**************************
MpKsl5303aa36.sys           Wed Aug 21 18:32:05 2013 (52153FE5)
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Thu Oct 16 20:30:23.118 2014 (UTC - 4:00)**************************
DigiartyVirtualCDBus.sys    Wed Sep  7 00:02:56 2011 (4E66ECF0)
MpKslf48b4c4a.sys           Wed Aug 21 18:32:05 2013 (52153FE5)

http://www.carrona.org/drivers/driver.php?id=SMSCirda.sys
http://www.carrona.org/drivers/driver.php?id=VSTCNXT3.SYS
http://www.carrona.org/drivers/driver.php?id=VSTAZL3.SYS
http://www.carrona.org/drivers/driver.php?id=VSTDPV3.SYS
http://www.carrona.org/drivers/driver.php?id=oz776.sys
netwlv32.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.
http://www.carrona.org/drivers/driver.php?id=GEARAspiWDM.sys
http://www.carrona.org/drivers/driver.php?id=b57nd60x.sys
MpKsl1cfda53b.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.
MpKsl6cd92f91.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.
MpKslcd94ed95.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.
cpuz137_x32.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.
ntosext.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.
http://www.carrona.org/drivers/driver.php?id=intelppm.sys
win32kbase.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.
win32kfull.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.
CEA.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.
clipsp.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.
mmcss.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.
http://www.carrona.org/drivers/driver.php?id=intelide.sys
cmimcext.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.
MpKsl5303aa36.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.
DigiartyVirtualCDBus.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.
MpKslf48b4c4a.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

Glorfindel · 23 Oct 2014

I fixed it!!
It was a program called "Agomo" by Piriform, who also has the Speccy program. It apparently installed cpu-z with the rest of the program. Uninstalling it fixed the problem.
Thank you very much for all the help and troubleshooting!

usasma · 24 Oct 2014

I'm glad that you figured it out. Thanks for letting us know!

Glorfindel · 24 Oct 2014

I wouldn't dream of doing otherwise