Windows 10: BOSD 7 times today, either while using Chrome or right after boot up

**Yargblarg** · 13 Oct 2015

How do you tell if the contact modules are clean, and how do you clean them if they are dirty? Is this something I should ask in one of the other sections?

**axe0** · 13 Oct 2015

If there is no dust or something on the contacts it is clean.
A good way to clean them would be with rubbing alcohol and a q-tip.

This post is a good post for cleaning the slots.

**Yargblarg** · 13 Oct 2015

So last night once i realized that the difference in frequency wasn't the issue, I figured I may as well try changing the voltage of the RAM in the BIOS since the motherboard was running the ram at 1.5V even though the RAM should run at 1.65V, so I changed the voltage of the ram to 1.640V. I probably should have done that back when I first built the computer, but that was a long time ago and I didn't know what a "BIOS" was. Anyway, so I set the higher voltage, lowered the ram frequency to something supported by my old Intel 950 processor, and then I ran Memtest86. It's done 16 passes with no errors, so I think I fixed it....

Also, I did check the RAM and it seems to be clean

Thank you for you help

**Yargblarg** · 24 Oct 2015

Well my computer has still been acting up and i set the bios settings back to their defaults. I really don't know why my computer still has problems...

**axe0** · 24 Oct 2015

Are you still getting bluescreens?
If so, please run the DM Log Collector tool again and upload the zip file.

**Yargblarg** · 25 Oct 2015

Yes I'm still getting blue screens...Attachment 44631

**axe0** · 25 Oct 2015

Please upload the zip file again, it is empty.

**Yargblarg** · 25 Oct 2015

Sorry about that

**axe0** · 25 Oct 2015

Please remove Gigabyte, it is well known for causing BSOD's.

The Avira drivers have been flagged, please uninstall Avira and use Windows Defender as alternative.

Code:

*** WARNING: Unable to verify timestamp for avgntflt.sys
*** ERROR: Module load completed but symbols could not be loaded for avgntflt.sys

*** WARNING: Unable to verify timestamp for avipbb.sys
*** ERROR: Module load completed but symbols could not be loaded for avipbb.sys

Please disable driver verifier

Open an admin command prompt
Enter "verifier/reset" (without quotes)

**Yargblarg** · 25 Oct 2015

Gigabyte is the manufacturer of my motherboard, so would removing that affect my motherboard? Also, what about it should i remove (like what programs)?

Windows 10: BOSD 7 times today, either while using Chrome or right after boot up

Posting Permissions