BSOD THREAD_STUCK_IN_DEVICE_DRIVER error

JollyDave · 29 Sep 2015

Beta driver didn't work, just freezes mid cutscene forcing me to reset

axe0 · 30 Sep 2015

Please not the temperatures when idle and under load.

Diagnostic test

GPU TEST

Run Furmark to test your GPU. Furmark tutorial

Note

Run Furmark for around 30 minutes

Warning

Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if temperatures rise too high

JollyDave · 30 Sep 2015

Cpu temp idle 48.5 - under load 66
Gpu temp idle 6- under load 17

Furmark did crash after 5 minutes first time then 3:25 second time and third time just stopped responding about 5 minutes in

axe0 · 30 Sep 2015

Still running the beta drivers?

JollyDave · 30 Sep 2015

No I switched back to the standard build

axe0 · 30 Sep 2015

axe0 said:

Please make sure your APU is clean of dust.

Assuming you have done this, you also made sure it is properly connected?

JollyDave · 30 Sep 2015

Just checked all connected and tight, ran furmark for a good 15mins without problem, will do a longer one in a few hours and test outlast soon

axe0 · 30 Sep 2015

Keep us posted :)

JollyDave · 30 Sep 2015

Ok so tested outlast and that froze my computer half way through the first cutscene, tried kerbal space program and that also froze a few minutes in, ran Furmark and that froze about 5 minutes in. So no BSOD so far but freezing like hell whenever there's stress put on the gpu. Should I run drive verifier?

axe0 · 30 Sep 2015

If you have anything connected to your pc outside of mouse and keyboard, disable it and test.

Diagnostics Test

HDD TEST

Run SeaTools to check the integrity of your HDD. http://www.sevenforums.com/tutorials...s-how-use.html

Note

Do not run SeaTools on an SSD as the results will be invalid.

Run chkdsk http://www.sevenforums.com/tutorials...isk-check.html