BSOD caused by ntoskrnl.exe please help

Page 2 of 3 FirstFirst 123 LastLast

  1. Posts : 13
    Windows 10 Pro
    Thread Starter
       #11

    Thanks for your help. I ran a memtest overnight with just the 4 sticks and no errors. I would have never known I had bad hardware if it wasnt for you. Meanwhile I just sent the 2 sticks to corsair for replacement.
      My Computer


  2. Posts : 14,904
    Windows 10 Pro
       #12

    You're welcome :)

    When you have the new sticks, please test your system with the new sticks carefully.
      My Computers


  3. Posts : 13
    Windows 10 Pro
    Thread Starter
       #13

    what do you mean by carefully? my plan was to install them in my last 2 slots and run a memtest overnight. do you have any other suggestions?
      My Computer


  4. Posts : 14,904
    Windows 10 Pro
       #14

    Asharus said:
    what do you mean by carefully? my plan was to install them in my last 2 slots and run a memtest overnight. do you have any other suggestions?
    +1 for Memtest

    Check the BIOS to make sure the settings are correct.
      My Computers


  5. Posts : 13
    Windows 10 Pro
    Thread Starter
       #15



    Got a BSOD just now. I have not received my replacement sticks yet. Actually it arrived, but fedex didn't leave it here, so I'll have to wait until tomorrow.

    I've attached the minidump that was created.
      My Computer


  6. Posts : 14,904
    Windows 10 Pro
       #16

    Are you still using the bad sticks?
      My Computers


  7. Posts : 13
    Windows 10 Pro
    Thread Starter
       #17

    No, I'm still on the 4 good ones. I didn't receive the 2 replacements yet. I will be getting them today though. I posted a minidump. Any insight on the cause of that crash? Thanks.
      My Computer


  8. Posts : 14,904
    Windows 10 Pro
       #18

    The crash is a 0x12b which usually is caused by hardware memory.
    Please test your hard drive(s) as they are hardware memory too, but non-volatile.
    With SSD's skip Seatools.




    Diagnostics Test

     HDD & SSD TEST


    Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums

    Note   Note
    Do not run SeaTools on an SSD as the results will be invalid.


    Run chkdsk Disk Check - Windows 7 Help Forums



    Please fill in your system specs
    Please follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.
    How to fill in your system specs:

      My Computers


  9. Posts : 13
    Windows 10 Pro
    Thread Starter
       #19

    My apologies, I did not get a chance to run that test yet. My system drive is an SSD, but I have 4 data drives I can run the test on.

    Meanwhile, I noticed my computer has rebooted. I found a new minidump file, so I'm sure it crashed. Can you please review it to see if it's consistent with the memory issue? Thanks.
      My Computer


  10. Posts : 14,904
    Windows 10 Pro
       #20

    Code:
    Probably caused by : memory_corruption
    Please check the frequency of the memory in the BIOS and make sure it is supported by your motherboard.

    Please fill in your system specs
    Please follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.
    How to fill in your system specs:

      My Computers


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 03:13.
Find Us




Windows 10 Forums