Windows 10: BSOD Bug Check Code 0x00000139

Page 7 of 19 FirstFirst ... 5678917 ... LastLast

  1. Posts : 109
    Microsoft Windows 10 Pro 64-bit 10240 Multiprocessor Free
    Thread Starter
       03 Oct 2015 #61
      My ComputerSystem Spec


  2. Posts : 11,520
    Windows 10 Pro
       03 Oct 2015 #62

    Please let me know if you have performed any test, only 2 tests we need to rule out are the CPU and RAM tests.

    Please make sure to clean the contacts of the RAM if you haven't.
      My ComputersSystem Spec


  3. Posts : 109
    Microsoft Windows 10 Pro 64-bit 10240 Multiprocessor Free
    Thread Starter
       04 Oct 2015 #63

    Attachment 40993 Hi i did a clean install again as i installed the wrong version of windows 10.
      My ComputerSystem Spec


  4. Posts : 11,520
    Windows 10 Pro
       04 Oct 2015 #64

    I have read it yes.
    Did this crash happen after the clean install?
      My ComputersSystem Spec


  5. Posts : 109
    Microsoft Windows 10 Pro 64-bit 10240 Multiprocessor Free
    Thread Starter
       04 Oct 2015 #65

    i think the one on 3/10 is before the crash as i didnt get any crashes after the clean install. The latest crash happened when im using Libre Office.
      My ComputerSystem Spec


  6. Posts : 11,520
    Windows 10 Pro
       04 Oct 2015 #66

    Alright.
    Please make sure there is no dust inside the case, this often causes crashes as the components can't function properly anymore.

    Please try MemTest86+ again



    BSOD Bug Check Code 0x00000139 Diagnostic Test BSOD Bug Check Code 0x00000139
     RAM TEST

    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note


    MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.
      My ComputersSystem Spec


  7. Posts : 11,520
    Windows 10 Pro
       04 Oct 2015 #67

    Not to forget
    Please download and install Malwarebytes free (Uncheck trial version in the installation process)
    Please run a threat scan with Malwarebytes, a full scan with Windows Defender, scan your system with Adwcleaner and Kaspersky TTDSKiller.
    It might be weird to scan your system for infections when you have just clean installed, but the error 0xF4 (DRIVER_OVERRAN_STACK_BUFFER) is often caused by an infection.
      My ComputersSystem Spec


  8. Posts : 109
    Microsoft Windows 10 Pro 64-bit 10240 Multiprocessor Free
    Thread Starter
       04 Oct 2015 #68

    Hey i already did the malwarebyte and found a threat.
    Here is the latest dump file.Attachment 41038
      My ComputerSystem Spec


  9. Posts : 11,520
    Windows 10 Pro
       04 Oct 2015 #69

    mihomilo said: View Post
    Hey i already did the malwarebyte and found a threat.
    Yes, but was the threat from the first scan or the second?

    There are lots of things that has been done and ruled out, but I would like information from you about what you are doing at the time of the crash.
    This helps to indicate what the problem might be.

    Right now, the memory and PSU are not ruled out.
    If both are ruled out, then your motherboard is failing/faulty.

    Did you remove any dust inside your case if there was any dust?
    Have you tried to reseat the RAM?

    Have you tried MemTest86+ again?
    If not, please try MemTest86+ again



    BSOD Bug Check Code 0x00000139 Diagnostic Test BSOD Bug Check Code 0x00000139
     RAM TEST

    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note


    MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.


    The AMD video drivers have been flagged again, this is most likely a memory problem as everything related to the graphics card has been ruled out.
    Code:
    *** WARNING: Unable to verify timestamp for atikmdag.sys
    *** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
    
    0: kd> lmvm atikmdag
    start             end                 module name
    fffff800`11f50000 fffff800`1345a000   atikmdag T (no symbols)           
        Loaded symbol image file: atikmdag.sys
        Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys
        Image name: atikmdag.sys
        Timestamp:        Tue Aug 04 05:28:52 2015 (55C03174)
        CheckSum:         014ADEC6
        ImageSize:        0150A000
        Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
      My ComputersSystem Spec


  10. Posts : 109
    Microsoft Windows 10 Pro 64-bit 10240 Multiprocessor Free
    Thread Starter
       04 Oct 2015 #70

    I will run memtest tomorrow. During the crash, i was using Libre Words.
    Last edited by mihomilo; 05 Oct 2015 at 06:09.
      My ComputerSystem Spec


 
Page 7 of 19 FirstFirst ... 5678917 ... LastLast

Related Threads
Hi, guys I got a problem with constantly repeating BSOD mostly because these two reasons in topic. I have checked online and did everything for preventing this from happening. And it doesnt worked :/ The other things I have done are checking...
I should probably preface by saying I am using a custom-built machine and never had a BSOD when I was using Windows 7. Since I took the plunge, I've been greeted by a BSOD on nearly every startup (usually around 1-3 minutes after the lock screen...
BSOD Random Machine Check Exception in BSOD Crashes and Debugging
Just upgraded to W10 from 8.1 and I'm getting apparently random Freezes without BSOD and sometimes BSOD Machine Check Exception. The problem already happened 3-4 times on Windows 8.1. Somehow I thought it could be related to CPU temp, so I opened...
BSOD Kernel security check failure in BSOD Crashes and Debugging
29243 Recieving the BSOD once a day, at least. My drivers are up to date so far as I know and I've tried various methods of troubleshooting including the steps outlined here: What does the Kernel Security Check Failure Blue Screen error mean?...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 06:30.
Find Us