Attachment 40637 New BSOD
It is known with Google Chrome for taking a lot of memory resources.
This due to the tabs that are open and the installed extensions.
Please uninstall Google Chrome as a test, it lately causes for some people BSOD's.
If you have anything you want to keep, like favorite sites you saved in chrome, settings and extensions, make sure synchronisation is enabled.
Hmm i doubt so.. I have 8GB of ram and there is a 5.5GB of "Hardware Reserved Memory". I searched online and compared mine with my friend whom have the same windows 10 pro 64bit. His Hardware Reserved Memory is only around 300 mb while mine is 5.5 gb :/
oo okay . I have already did uninstalling and installed only the driver. By the way, the fact that u are able to receive my minidump means that there is no problem with my hardware right?
It doesn't mean there are no hardware problems.
It means that if there are hardware problems it is not reported by that hardware component or the problem is not worse enough.
Yes you did, but have you also used the Display Driver Uninstaller?
If not, please do so, sometimes with updating display drivers, the other driver is not correctly replaced what gives problems.
Yup i used the Display Driver Uninstaller to remove the driver. How do i check if my hardware has problems then?
These are some tests.
Diagnostics Test TroubleshootingRead carefully before proceeding.
Part One: CPU Stress Test
Part Two: MemTest86+ RAM Diagnostic
Part Three: Hard Drive Diagnostics
Part Four: GPU Stress Test
Run Prime95 to stress test your CPU. Prime95 - Stress Test Your CPU - Windows 10 Forums
WarningYour CPU temperatures will rise quickly while under this stress test. Keep a keen eye on them and abort the test if overheating occurs.
Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums
MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.
Run SeaTools to check the integrity of your HDD. http://www.sevenforums.com/tutorials...s-how-use.html
NoteDo not run SeaTools on an SSD as the results will be invalid.
Run chkdsk http://www.sevenforums.com/tutorials...isk-check.html
Run Furmark to stress test your GPU. FurMark - GPU Stress Test - Windows 10 Forums
NoteRun Furmark for around 30 minutes.
WarningYour GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if overheating occurs.
oo okay thx