Page 2 of 2 FirstFirst 12

  1. Joined : Oct 2013
    NW Florida
    Posts : 6,733
    Windows 10 Enterprise and Pro/Windows 7 Enterprise/Linux Mint
       20 Sep 2015 #11

    BSODmakesmesad, while @axe0 is offline, I will try to assist you. first please complete your system specs including your motherboard, Hard Drives, power supply, CPU Cooler and anything else that may help us help you. These are the instructions I usually give.

    Please go to your last post and in the bottom left corner click 'My System Specs'. there is a link there to update your system specs, click it and fill them all out in as much detail as possible. Please list Manufacturer and Model, and list Desktop or Laptop. If it is an OEM, please list the Manufacturer and Model number. Please be sure to list your PSU and CPU cooler. If you would like to know what we would like, please click 'My System Specs' at the bottom left of this post and see mine.

    Also, please make sure your system is set for small Memory Dumps BSOD Minidump - Configure to Create in Windows 10. Then go to C:/Windows and make sure you have a folder named Minidump. If you do not, please create one. We need the dump files to get a better idea of what is happening.

    If you are overclocking anything, please set everything back to defaults. Please use your preferred software to keep a close watch on both your CPU temps and GPU temps.

    If you would, please download and install CPUz http://www.cpuid.com/softwares/cpu-z.html and post screenshots Screenshots and Files - Upload and Post in Ten Forums of the CPU, Mainboard, Memory and SPD tabs. On the SPD tabs you can select each Dimm Slot from a dropdown in the upper left of the screen. Just post screenshots of the Dimm Slots that are populated with Ram.
      My System SpecsSystem Spec


  2. Joined : Sep 2015
    Posts : 10
    Windows 10 Pro 64 bit
       20 Sep 2015 #12

    Ok. Updated as much as I could. It's a couple years old and survived a couple moves, so I don't remember all the pieces perfectly. Hopefully there's enough information.

    I have my settings for the memory dump set like they should be according to that post and the folder exists, but there's still nothing in there after 2 crashes. I am going to turn off automatic restarts next time just on the off chance it might be restarting before writing the dumpfile, but that seems like it shouldn't happen, so I don't know if that will help.

    As far as overclocking is concerned, nothing in the computer should be overclocked unless it was by the manufacturer. Should be totally vanilla as far as components are concerned.

    Here's the pictures.

    Thanks for your help so far
      My System SpecsSystem Spec


  3. Joined : Oct 2013
    NW Florida
    Posts : 6,733
    Windows 10 Enterprise and Pro/Windows 7 Enterprise/Linux Mint
       20 Sep 2015 #13

    Everything I see looks fine. I may suggest on your Ram in BIOS, you are set at the correct timings but the command rate (CR) is 1T, which may be within specs. But, I would change it to 2T. 2T is usually more stable than 1T.

    If you have any Gigabyte Utilities installed, please uninstall all of them. You also are running the first BIOS that the board was released with (F3). If you will go to your motherboard's web site (GIGABYTE - Motherboard - Socket 1155 - GA-Z68XP-UD3-iSSD (rev. 1.0), under Downloads and CPU Support list, it says you should be running bios version F10. If you update the BIOS, be sure you follow the manufacturer's instructions carefully. A bad BIOS flash can damage your motherboard. Also, make sure that is your motherboard the link goes to.
      My System SpecsSystem Spec


  4. Joined : Sep 2015
    Posts : 10
    Windows 10 Pro 64 bit
       20 Sep 2015 #14

    I'll try both of those things, and if a memory dump actually dumps one of these times I'll be sure to post it.
      My System SpecsSystem Spec


  5. Joined : Sep 2015
    Posts : 10
    Windows 10 Pro 64 bit
       22 Sep 2015 #15

    Tiny update.

    I found this last night, and it seems like it might explain my problem. Not certain yet, but I'm going to try it later. It would at least explain why crashes seemed to randomly start out of nowhere and it might explain why crash logs aren't writing if the hard drive I'm trying to write the crash log to is shutting down randomly.

    Haven't updated the firmware yet, but I'll do that later tonight and post back.
      My System SpecsSystem Spec


  6. Joined : Sep 2015
    Posts : 10
    Windows 10 Pro 64 bit
       23 Sep 2015 #16

    So tentative good news. Updated SSD firmware last night, and it did not crash for the remainder of the night over 3 hours, which is a decent bit longer than it usually lasts. I'll wait till this weekend when I can get some really long duration testing before putting this to bed, but I'm very optimistic so far :3
      My System SpecsSystem Spec


  7. Joined : Oct 2013
    NW Florida
    Posts : 6,733
    Windows 10 Enterprise and Pro/Windows 7 Enterprise/Linux Mint
       23 Sep 2015 #17

    Great news. Firmware can do that. Attachment 38994
      My System SpecsSystem Spec


  8. Joined : Jun 2015
    Posts : 10,897
    Windows 10 Pro / Windows 10 TP / Windows 8.1 Pro / Windows 7 Pro
       23 Sep 2015 #18

    Good to hear
      My System SpecsSystem Spec


 
Page 2 of 2 FirstFirst 12


Similar Threads
Thread Forum
Critical_Process_Died almost exactly every 2 hours
Recently we had a rare power outage here, and ever since then almost exactly every 2 hours on the dot I'm getting a BSoD Critical_Process_Died error. I've ran memtest, tried the 'system reset', start up repair, sfc /scannow, etc, but nothing has...
BSOD Crashes and Debugging
Solved Crashes during gaming and followup crashes on restart
I was having similar issues on windows 7 X64, recently updated to 10, issues are still here. Computer will crash during gaming, sometimes it lasts a while or crashes pretty immediately, afterwards, attempting to start the computer will trigger many...
BSOD Crashes and Debugging
Sporadic Live Tile Updates
Hi, Okay, I understand that Live Tile updates for third-party apps can and will vary. But when it comes to certain standard/system apps, I would expect to always see their Live Tile functionality in effect. Both my Weather and Calendar apps...
Software and Apps
Solved Critical_process_died
Please Help... memory.dmp 400mb = Probably Caused by ntkrnlmp.exe Absolutely random cause. need to post my dmp?
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:15.
Find Us
Twitter Facebook Google+



Windows 10 Forums