1.    07 Sep 2015 #1
    Join Date : Sep 2015
    Posts : 2
    Windows 10 PRO

    BSOD fault=Driver IRLQ not Less or Equal - L1C63x64.sys

    Have gotten a bunch of BSOD due to this problem last few days, cleared out minidump folder so there wouldn't be anything unrelated to this problem and used your program to capture the information to see what you guys could find that would help me.

    I seen a few others posted about this and we all have the same basic problem, very old driver(2013) and no official or unofficial driver to update with but saw that some of the guys had other programs that triggered the bug and the system blamed the driver and I hope this is the case for me.

    Please let me know if there is anything else I can provide you with and thanks for helping us
      My ComputerSystem Spec
  2.    07 Sep 2015 #2
    Join Date : Jun 2015
    Posts : 12,968
    Windows 10 Pro

    Hi vaargen,

    Welcome to the 10forums.

    According to the dump there are a few drivers blamed.
    The Network In/Output system
    The NIC (Network Interface Card) driver

    My guess is that Daemon tools is the root of the problem.

    Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
    Please remove Daemon Tools and run the SPTD pass through remover.

    1. Uninstall Daemon Tools
    2. Download the SPTD standalone installer and follow these steps:
      • Double click the executable to open it
      • Click on the button shown below

    If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window
      My ComputersSystem Spec
  3.    07 Sep 2015 #3
    Join Date : Sep 2015
    Posts : 2
    Windows 10 PRO
    Thread Starter

    Hi axe0 and thanks for the fast reply.

    I saw when reading through the other posts that daemon tools can cause problems, so I uninstalled it yesterday with REVO to be sure to erase as much as possible from my computer and when checking with SPTD, it said it didn't find any version on my system.

    Any other tips?
      My ComputerSystem Spec
  4.    07 Sep 2015 #4
    Join Date : Jun 2015
    Posts : 12,968
    Windows 10 Pro

    A few to start with.
    Driver verifier to get the driver that is really causing the issue.
    NTFS.sys was also flagged, but I understand that it has something to do with the hard drive.

    Please run first HDD diagnostics and driver verifier after HDD diagnostics is done

    BSOD fault=Driver IRLQ not Less or Equal - L1C63x64.sys Diagnostic Test BSOD fault=Driver IRLQ not Less or Equal - L1C63x64.sys

    Run SeaTools to check the integrity of your HDD. http://www.sevenforums.com/tutorials...s-how-use.html

    Note   Note
    Do not run SeaTools on an SSD as the results will be invalid.

    Run chkdskhttp://www.sevenforums.com/tutorials...isk-check.html

    BSOD fault=Driver IRLQ not Less or Equal - L1C63x64.sys Diagnostic Test BSOD fault=Driver IRLQ not Less or Equal - L1C63x64.sys

    warning   Warning
    Please make a backup of your important files and get your rescue media or create one.
    Please create a restore point.

    Please follow this tutorial run driver verifier.

    Some windows drivers are blamed in a few crashes, but that usually means that a 3rd party driver is actually the cause.
    Driver verifier stresses your drivers and will crash your pc if any driver fails due to a violation.

    Driver verifier should be performed for a max of 48 hours, or when you have a bluescreen, whatever comes first.

    If driver verifier has found a violation and you can't get back into windows normally, try to boot into safe mode and reset in safe mode driver verifier, or in the troubleshooting options open command prompt and type verifier /reset.

    Note   Note
    Your system will act very sluggishly while driver verifier is enabled, this is normal as your drivers will be being subjected to heavy testing in order to make them crash.
      My ComputersSystem Spec


Similar Threads
Thread Forum
BSOD L1C63x64.sys driver
Hi, I am getting BSODs and the error message it gives is: Driver_IRQL_NOT_LESS_OR_EQUAL(L1C63x64.sys) I believe that is the Qualcomm Atheros Network driver, but mine is up to date to the last Windows8 compatible driver on the Atheros website....
BSOD Crashes and Debugging
Driver IRLQ not Less or Equal - L1C63x64.sys
A couple of times a week my computer will freeze and the audio goes go into a loop, followed by a BSOD showing DRIVER_IRQL_NOT_LESS_OR_EQUAL blaming L1C63x64.sys (Atheros LAN). This generally happens when playing games, though I've had it once or...
BSOD Crashes and Debugging
BSOD Driver IRQL Not less or equal on Windows 10 Bootup
Hi, I am sorry, but I couldn't post a debug-YourComputerName-xxxx.zip file because I am currently unable to use my computer. But anyway, I originally posted this question on another answer website, and somebody started helping me and then...
BSOD Crashes and Debugging
i keep getting crashes since i got w10 driver iqrl not less or equal (
this week it has happened at least 5 times driver iqrl not less or equal (L1C63x64.sys)
BSOD Crashes and Debugging
Crash: Driver Not Less or Equal
Can someone please look at my thread? Below, is the crash dump. ~22696[/ATTACH
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 14:47.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App

Windows 10 Forums