Page 1 of 2 12 LastLast

  1. Joined : Sep 2015
    Posts : 18
    Windows 10
       05 Sep 2015 #1

    FAILURE_BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_CACHE


    I've got a load of HD-DVDs which I'm backing up while my ageing LG HD-DVD/Blu-Ray combi drive still works.

    I was using Handbrake, so x264 at the time. I am quite heavily overclocked at 4.6Ghz so I suspect I may need to increase the voltage slightly, but system was well and truly soak tested at the time the overclock was finalised last year. Both Prime95 and memtest ran overnight without errors, also tested with x264 before without error but this was with Windows 8.1.

    Zip file attached as requested:
    Attachment 35896
      My System SpecsSystem Spec


  2. Joined : Jun 2015
    Posts : 10,904
    Windows 10 Pro / Windows 10 TP / Windows 8.1 Pro / Windows 7 Pro
       05 Sep 2015 #2

    Hi SpecChum,

    Welcome to the 10forums.

    Remove the overclocking and see if that helps.

    The error 0x124 WHEA_UNCORRECTABLE_ERROR (Windows Hardware Error Architecture)
    This means that there are problems with your hardware, unfortunately this error rarely gives enough information for a specific cause. Fortunately, this error is mostly caused by overclocking or faulty drivers.
      My System SpecsSystem Spec


  3. Joined : Sep 2015
    Posts : 18
    Windows 10
       05 Sep 2015 #3

    Thanks for the welcome

    I think I know what it might be actually, I seem to remember I lowered the ring (cache) voltage quite a few months ago. I took it from auto which set it to a ridiculously high amount so I set it manually. I've not had 1 BSOD since, I don't think I've tried x264 since either.

    I'll raise that and try the encode again
      My System SpecsSystem Spec


  4. Joined : Jun 2015
    Posts : 10,904
    Windows 10 Pro / Windows 10 TP / Windows 8.1 Pro / Windows 7 Pro
       05 Sep 2015 #4

    Keep us posted
      My System SpecsSystem Spec


  5. Joined : Sep 2015
    Posts : 18
    Windows 10
       05 Sep 2015 #5

    Will do, nothing unusual in my zipped logs?
      My System SpecsSystem Spec


  6. Joined : Oct 2013
    Tropic of Cancer
    Posts : 1,648
    Microsoft Windows 10 Home
       05 Sep 2015 #6

    There is a fair chance that the issue is caused of RAID.
    Code:
    BugCheck 124, {0, ffffe0014e9de028, ff800000, 124}
    
    *** WARNING: Unable to verify timestamp for iaStorA.sys
    *** ERROR: Module load completed but symbols could not be loaded for iaStorA.sys
    Probably caused by : GenuineIntel
    
    Followup: MachineOwner
    ---------
    In SevenForums we have experienced it with a great frequency that RAID is problematic. So if RAID is not a must for you, dont go for RAID. Disable RAID in BIOS (which may claim a clean reinstallation of windows; usually changing the storage controller mode does not allow windows to boot up) and see how it goes.

    If RAID is a must for you, search for any possible update to Intel Chipset SATA RAID Controller in MSI India - Computer, Laptop, Notebook, Desktop, Motherboard, Graphics and more

    See how it goes. Let us know.
      My System SpecsSystem Spec


  7. Joined : Jun 2015
    Posts : 10,904
    Windows 10 Pro / Windows 10 TP / Windows 8.1 Pro / Windows 7 Pro
       05 Sep 2015 #7

    Arc said: View Post
    There is a fair chance that the issue is caused of RAID.
    Code:
    BugCheck 124, {0, ffffe0014e9de028, ff800000, 124}
    
    *** WARNING: Unable to verify timestamp for iaStorA.sys
    *** ERROR: Module load completed but symbols could not be loaded for iaStorA.sys
    Probably caused by : GenuineIntel
    
    Followup: MachineOwner
    ---------
    In SevenForums we have experienced it with a great frequency that RAID is problematic. So if RAID is not a must for you, dont go for RAID. Disable RAID in BIOS (which may claim a clean reinstallation of windows; usually changing the storage controller mode does not allow windows to boot up) and see how it goes.

    If RAID is a must for you, search for any possible update to Intel Chipset SATA RAID Controller in MSI India - Computer, Laptop, Notebook, Desktop, Motherboard, Graphics and more

    See how it goes. Let us know.
    This was going to be my 2nd thing to check, but thank you for posting it
      My System SpecsSystem Spec


  8. Joined : Sep 2015
    Posts : 18
    Windows 10
       05 Sep 2015 #8

    RAID certainly is not essential no, in fact if anyone is thinking of RAIDing 2 SSDs together, don't bother; it's unnoticeable outside of synthetic benchmarks.

    I had every intention of installing back onto a single SSD next time a new install was needed.

    Saying that though I dare say if RAID was the culprit I'd be seeing a BSOD of some sort more frequently. This is the only one I've had since I settled on this over clock almost 12 months ago. I game as well so PC is well used.

    EDIT: I've increased the ring voltage and encoding again now, same setting. 2.5hrs left, so I'll let you know how it goes.
      My System SpecsSystem Spec


  9. Joined : Sep 2015
    Posts : 18
    Windows 10
       05 Sep 2015 #9

    16 mins left on the encode and working fine so far, crashed well before this before, but I've just realised, I did an nvidia driver update just before the BSOD and did I reboot after the update? Nope. D'oh!

    Maybe the voltage increase wasn't needed at all.
      My System SpecsSystem Spec


  10. Joined : Jun 2015
    Posts : 10,904
    Windows 10 Pro / Windows 10 TP / Windows 8.1 Pro / Windows 7 Pro
       05 Sep 2015 #10

    SpecChum said: View Post
    Will do, nothing unusual in my zipped logs?
    Only thing that I would call unusual is missing files.

    Keep us posted in case of new bluescreens.
      My System SpecsSystem Spec


 
Page 1 of 2 12 LastLast

Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:25.
Find Us
Twitter Facebook Google+



Windows 10 Forums