Windows 10: BSOD Kernel Security Check Failure (ntoskrnl.exe) Solved

Page 3 of 6 FirstFirst 12345 ... LastLast
  1.    08 Sep 2015 #21

    axe0 said: View Post



    BSOD Kernel Security Check Failure (ntoskrnl.exe) Diagnostic Test BSOD Kernel Security Check Failure (ntoskrnl.exe)
     RAM TEST

    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note


    MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.


    If MemTest results are positive (zero errors) then try



    BSOD Kernel Security Check Failure (ntoskrnl.exe) Diagnostic Test BSOD Kernel Security Check Failure (ntoskrnl.exe)
     DRIVER VERIFIER

    warning   Warning
    Please make a backup of your important files and get your rescue media or create one.
    Please create a restore point.

    Please follow this tutorial run driver verifier.

    Some windows drivers are blamed in a few crashes, but that usually means that a 3rd party driver is actually the cause.
    Driver verifier stresses your drivers and will crash your pc if any driver fails due to a violation.

    Driver verifier should be performed for a max of 48 hours, or when you have a bluescreen, whatever comes first.

    If driver verifier has found a violation and you can't get back into windows normally, try to boot into safe mode and reset in safe mode driver verifier, or in the troubleshooting options open command prompt and type verifier /reset.

    Note   Note
    Your system will act very sluggishly while driver verifier is enabled, this is normal as your drivers will be being subjected to heavy testing in order to make them crash.
    Ran Memtest for about 8 passes and 0 errors were found, will start driver stress test tomorrow when i have time to use the computer
      My ComputerSystem Spec

  2.    09 Sep 2015 #22

    axe0 said: View Post



    BSOD Kernel Security Check Failure (ntoskrnl.exe) Diagnostic Test BSOD Kernel Security Check Failure (ntoskrnl.exe)
     RAM TEST

    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note


    MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.


    If MemTest results are positive (zero errors) then try



    BSOD Kernel Security Check Failure (ntoskrnl.exe) Diagnostic Test BSOD Kernel Security Check Failure (ntoskrnl.exe)
     DRIVER VERIFIER

    warning   Warning
    Please make a backup of your important files and get your rescue media or create one.
    Please create a restore point.

    Please follow this tutorial run driver verifier.

    Some windows drivers are blamed in a few crashes, but that usually means that a 3rd party driver is actually the cause.
    Driver verifier stresses your drivers and will crash your pc if any driver fails due to a violation.

    Driver verifier should be performed for a max of 48 hours, or when you have a bluescreen, whatever comes first.

    If driver verifier has found a violation and you can't get back into windows normally, try to boot into safe mode and reset in safe mode driver verifier, or in the troubleshooting options open command prompt and type verifier /reset.

    Note   Note
    Your system will act very sluggishly while driver verifier is enabled, this is normal as your drivers will be being subjected to heavy testing in order to make them crash.

    So I have been running driver verifyer all day today and it hasnt crashed so far which is confusing. i so far have had about 10 tabs of pages open in chrome (my ususal browser) and have played around in steam and origin and have played around with alot of random crap in windows with no crashes.
      My ComputerSystem Spec

  3.    09 Sep 2015 #23

    Finally got the computer to BSOD and heres the .zip from the utility
    Attachment 36681
      My ComputerSystem Spec


  4. Posts : 11,495
    Windows 10 Pro
       10 Sep 2015 #24

    Its not a bluescreen caused by driver verifier.
    Cause is AMD driver.
      My ComputersSystem Spec

  5.    10 Sep 2015 #25

    Well Fu** Should I try the beta AMD drivers
      My ComputerSystem Spec


  6. Posts : 11,495
    Windows 10 Pro
       10 Sep 2015 #26

    Wait some time until there is another crash.

    Remember, driver verifier should be performed for max 48 hours
      My ComputersSystem Spec

  7.    13 Sep 2015 #27

    OK I had it going fine for about 3 days straight with no bsod's and today I attempted to watch a DVD... I installed VLC (my preferred DVD player app) and popped in the dvd and after about 10 minutes it BSOD'd and a few minutes ago I was making a quote for a customer of mine and POOF another BSOD. so heres the output of the utility
    EDIT: also let me try some older drivers
    Attachment 37409
      My ComputerSystem Spec


  8. Posts : 11,495
    Windows 10 Pro
       14 Sep 2015 #28

    Please check AMD site for driver updates.
    Code:
    0: kd> lmvm atikmdagstart             end                 module name
    fffff801`40c10000 fffff801`4211a000   atikmdag T (no symbols)           
        Loaded symbol image file: atikmdag.sys
        Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys
        Image name: atikmdag.sys
        Timestamp:        Tue Aug 04 05:28:52 2015 (55C03174)
        CheckSum:         014ADEC6
        ImageSize:        0150A000
        Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
      My ComputersSystem Spec

  9.    04 Oct 2015 #29

    Sorry I Haven't Posted in such a long time... I have been busy with other projects I had lying around . but I am looking at simply popping in an Nvidia Card and switching off the GPU portion of the APU.... essentially bypassing the amd video drivers and using Nvidia drivers. would this fix the BSOD issue? if not please explain why.
      My ComputerSystem Spec


  10. Posts : 11,495
    Windows 10 Pro
       04 Oct 2015 #30

    If you want to use Nvidia drivers for AMD products, you can't do that.
    2 simple reasons for this
    1. You cannot use Nvidia drivers for AMD products as Nvidia drivers are ONLY for Nvidia Products and otherwise.
    2. Most likely the drivers won't install.
      My ComputersSystem Spec


 
Page 3 of 6 FirstFirst 12345 ... LastLast

Related Threads
BSOD often; "kernel security check failure" in BSOD Crashes and Debugging
I built this computer a year or so ago and upgraded to Windows 10 only recently. I have had no problems at all until yesterday. BSOD now happens quite often. In fact, I'm expecting it to happen any minute now. I have tried googling the problem...
Getting Constant Kernel Security Check Failure in BSOD Crashes and Debugging
Just upgraded my system, have all latest drivers installed but getting this error constantly any help appreciated.
windows 10 was running fine for a day or two, but now it crashes within 5 mins of startup like 5-6 times in a row, then seems to work fine after that. Here are the mini dump files
BSOD Kernel security check failure in BSOD Crashes and Debugging
29243 Recieving the BSOD once a day, at least. My drivers are up to date so far as I know and I've tried various methods of troubleshooting including the steps outlined here: What does the Kernel Security Check Failure Blue Screen error mean?...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 10:56.
Find Us