The QVL was just checked.
PRO Z690-A DDR4
These RAM were displayed on the QVL: CMW32GX4M2D3600C18
Run Memtest86+ for 8 or more passes.
A significant portion of the testing can be performed overnight while sleeping on 32 GB.
Alternatively test one RAM module (16GB) at a time in the same DIMM.
There is an 8 pass minimum to reduce false negatives.
It sometimes takes passes into the 20's to find malfunctioning RAM.
Just 1 error is a test fail and testing can be aborted.
I am running the tests now (first one is finished)
I have put back the original 64GB (2x32, which were installed for all except for about an hour or so). I'm running both sticks at once.
I'll update after at least 8 passes with a photo
- - - Updated - - -
It has been 11 hours and its only completed 4 passes so far. The first was a little over an hour, so it seems to have slowed quite a lot - I'm unsure if that's normal or not. I will leave it running for 8 passes unless advised otherwise or it fails, it may just take more time than expected
Please run 8 or more passes to reduce false negatives and improve accuracy.
Older Memtest86+ versions took 1 - 2 hrs / GB ram.
The newest version was not checked for testing time.
The image displayed 64 GB.
MemTest86+ needs to run for at least 8 passes to be anywhere near conclusive, anything less will not give a complete analysis of the RAM.
MemTest86+ - Test RAM
Ok, I will update when the 8 or more passes are compete or there is a fail. Thank you
- - - Updated - - -
I have now done 20 passes of the memtest86+ with no errors.
What would you recommended next step(s) be?
For new BSOD post a V2 share link into the newest post.
Quote
