Page 6 of 12 FirstFirst ... 45678 ... LastLast
  1.    05 Sep 2015 #51
    Join Date : Oct 2013
    NW Florida
    Posts : 9,693
    Windows 10 Pro and Windows 10 Pro Insider

    Many times they will pass the short test, but if there is a problem it will fail the long test.
      My ComputersSystem Spec
  2.    05 Sep 2015 #52
    Join Date : Sep 2015
    Posts : 78
    Windows 10
    Thread Starter

    Ok. I was just following those instructions. I'll run the long tests.
      My ComputerSystem Spec
  3.    05 Sep 2015 #53
    Join Date : Oct 2013
    NW Florida
    Posts : 9,693
    Windows 10 Pro and Windows 10 Pro Insider

    Yes, I didn't give proper instructions.
      My ComputersSystem Spec
  4.    05 Sep 2015 #54
    Join Date : Sep 2015
    Posts : 78
    Windows 10
    Thread Starter

    Not you. The instructions in the page. Your instructions are great :-)
      My ComputerSystem Spec
  5.    05 Sep 2015 #55
    Join Date : Oct 2013
    NW Florida
    Posts : 9,693
    Windows 10 Pro and Windows 10 Pro Insider

    When I ask someone to run Seatools, I usually ask for the short and long test. I didn't with you for some reason.
      My ComputersSystem Spec
  6.    05 Sep 2015 #56
    Join Date : Sep 2015
    Posts : 78
    Windows 10
    Thread Starter

    I'm having the same problem as I did with the memtest86+. I started with the Hitachi drive and 3 times it gets to about 1% maybe 2% and then the screen goes dark and no system response. I tired running on the other two disks with the same problem.
    So I played around with things when I would get these hangs. The box I have, Cooler Mixer, has two buttons for power. They light up. The lower one flickers while the SeaTools is running. It continues to flicker when the hangs occur. I then click on keys and no response. I eject the boot CD and no response and the lights keep flickering. I've waited up to five minutes and the system never responds. I finally need to hit ctrl-alt-del to get back the system.
    Because this hang is happening while running the SeaTools diagnostic I'm wondering if the problem goes back to mother board or RAM. We aren't even using the disks when running this tool.
    I just wish I could get this memtest86+ to finish.
      My ComputerSystem Spec
  7.    05 Sep 2015 #57
    Join Date : Oct 2013
    NW Florida
    Posts : 9,693
    Windows 10 Pro and Windows 10 Pro Insider

    Carl, please use your system, but if you don't have one, get you software that will read your CPU and your GPU temps. Use your system and run it pretty hard, if you game, play some games. Keep track of both temps at all times. If you get a BSOD please upload the DM Log Collector again. If you don't have temp monitoring software, I can give you some suggestions. I want to rule out overheating as the cause.
      My ComputersSystem Spec
  8.    06 Sep 2015 #58
    Join Date : Sep 2015
    Posts : 78
    Windows 10
    Thread Starter

    if you have some temp software please provide recommendations.
    I don't game but I do have Digital Audio workstation (DAW) software that might task the system.
      My ComputerSystem Spec
  9.    06 Sep 2015 #59
    Join Date : Oct 2013
    NW Florida
    Posts : 9,693
    Windows 10 Pro and Windows 10 Pro Insider

    For the GPU most manufacturers have a utility that will work. Most are overclocking utilities but are very good at reading temps and settings. If you don't have one MSI Afterburner is good (http://gaming.msi.com/features/afterburner) for the CPU I like either Core Temp or Real Temp
      My ComputersSystem Spec
  10.    06 Sep 2015 #60
    Join Date : Sep 2015
    Posts : 78
    Windows 10
    Thread Starter

    thank you. I'm running RealTemp and all four cores are 43-47c with not much of a load. I will try to put some load on the system as well.
    But my BSOD crashes have not come with much load. I"ll have only a handfull of MS apps, web browser run and it can crash.
    I've enable logging so that if it does crash I can go in and see what the temp is. I've set the log for 60 secs
      My ComputerSystem Spec

 
Page 6 of 12 FirstFirst ... 45678 ... LastLast


Similar Threads
Thread Forum
Bsod irql_not_less_or_equal
Upgrade to Windows 10 yesterday, from Windows 7 Pro. After a couple of hours of usage, I started getting BSODs, more specifically IRQL_NOT_LESS_OR_EQUAL. I decided to reset the system, but the same problem keeps occurring. I'm thinking it's a...
BSOD Crashes and Debugging
Bsod:- irql_not_less_or_equal
BSOD occurs at shutdown:- IRQL NOT LESS OR EQUAL file path: C:\Windows\system32\drivers\clfs.sys
BSOD Crashes and Debugging
Bsod, irql_not_less_or_equal
I want to ask you for help to find the cause of bsod. Windows 10, random bsod after a few hours of use 35301
BSOD Crashes and Debugging
Irql_not_less_or_equal
heya i upgraded to windows 10 yesterday and now i keep getting a blue screen. IRQL_NOT_LESS_OR_EQUALI think this is because of a bad driver? any ideas on how i can fix this. I already reinstalled my graphic card drivers with no succes.:(
BSOD Crashes and Debugging
Solved BSOD - usbehci.sys - IRQL_NOT_LESS_OR_EQUAL
I have already had 7 of them, just got one when trying to post this. I suspect my USB sound card. So far they have happened only in Windows, not in games, when listening to the music on youtube or via Radiosure, sometimes I was not even at PC, so I...
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 08:15.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums