Page 4 of 12 FirstFirst ... 23456 ... LastLast
  1.    04 Sep 2015 #31
    Join Date : Jun 2015
    Posts : 12,968
    Windows 10 Pro

    Before windows loads, there are 2 keys that you can press.
    1 is for entering the BIOS
    1 is for boot options.

    Unfortunately, with desktops, I do not know which keys
      My ComputersSystem Spec
  2.    04 Sep 2015 #32
    Join Date : Oct 2013
    NW Florida
    Posts : 9,718
    Windows 10 Pro and Windows 10 Pro Insider

    I just looked at your Motherboard. The Asus P6T does not have a UEFI Bios. So, that question is solved. When you downloaded, did you download the pre compiled USB installer? You just tell it which drive letter your USB is and it installs it.
      My ComputersSystem Spec
  3.    04 Sep 2015 #33
    Join Date : Sep 2015
    Posts : 78
    Windows 10
    Thread Starter

    That's all I did. And I followed the instructions here: MemTest86+ - Test RAM
      My ComputerSystem Spec
  4.    04 Sep 2015 #34
    Join Date : Oct 2013
    NW Florida
    Posts : 9,718
    Windows 10 Pro and Windows 10 Pro Insider

    I have a newer Asus board than you do, but the last 3 versions of their boards has been Delete to enter BIOS and F8 to enter the one time boot menu.
    Last edited by essenbe; 04 Sep 2015 at 20:30.
      My ComputersSystem Spec
  5.    04 Sep 2015 #35
    Join Date : Sep 2015
    Posts : 78
    Windows 10
    Thread Starter

    To get into bios setup I hit delete. Then I can go in and set the drive to boot to. I did this with memtest86 and can boot to that. But when I run the install for memtrst86+ And boot it says "missing operating system"
      My ComputerSystem Spec
  6.    04 Sep 2015 #36
    Join Date : Oct 2013
    NW Florida
    Posts : 9,718
    Windows 10 Pro and Windows 10 Pro Insider

    The other program is better, but run the one that will boot. It's a lot better than nothing at all.
      My ComputersSystem Spec
  7.    04 Sep 2015 #37
    Join Date : Sep 2015
    Posts : 78
    Windows 10
    Thread Starter

    Problem with that is my system goes to sleep and I can't see the results. I tried last night and this morning my system wouldn't respond. Not have much luck. I'm going to try some me other things. I found the memtest86+ forum with a procedure to manually create a boot. I'll see if that works.
      My ComputerSystem Spec
  8.    04 Sep 2015 #38
    Join Date : Oct 2013
    NW Florida
    Posts : 9,718
    Windows 10 Pro and Windows 10 Pro Insider

    Is there anything in your BIOS about sleep? you may try adjusting that if there is. Usually sleep is a function of the OS, but you are not booted into the OS when running the test, so sleep should not even be an option unless it is in your BIOS. Another option would be to download the ISO file and use Windows image burner or any image burning software you have to a CD and boot from the CD and see if that makes a difference. The ISO cannot be copied to the CD, it has to be burned to it. I use memtest86+ quite often and have others use it very often and don't seem to have this problem. So, I am just unsure of what the problem could be, unless there is a sleep function in bios or in your monitor settings.
      My ComputersSystem Spec
  9.    04 Sep 2015 #39
    Join Date : Sep 2015
    Posts : 78
    Windows 10
    Thread Starter

    Good points on both bios sleep and ISO to cd. I know how to burn an ISO so that Is a very good idea. If that fails then i will pursue the sleep mode. Thanks those. I'll post back probably tomorrow since if it works I won't know the results until it finishes.
    Thanks for the help. I really appreciate it.
      My ComputerSystem Spec
  10.    04 Sep 2015 #40
    Join Date : Sep 2015
    Posts : 78
    Windows 10
    Thread Starter

    ISO to cd boot was successful. Running tests now. Thanks!!!
      My ComputerSystem Spec

 
Page 4 of 12 FirstFirst ... 23456 ... LastLast


Similar Threads
Thread Forum
Bsod irql_not_less_or_equal
Upgrade to Windows 10 yesterday, from Windows 7 Pro. After a couple of hours of usage, I started getting BSODs, more specifically IRQL_NOT_LESS_OR_EQUAL. I decided to reset the system, but the same problem keeps occurring. I'm thinking it's a...
BSOD Crashes and Debugging
Bsod:- irql_not_less_or_equal
BSOD occurs at shutdown:- IRQL NOT LESS OR EQUAL file path: C:\Windows\system32\drivers\clfs.sys
BSOD Crashes and Debugging
Bsod, irql_not_less_or_equal
I want to ask you for help to find the cause of bsod. Windows 10, random bsod after a few hours of use 35301
BSOD Crashes and Debugging
Irql_not_less_or_equal
heya i upgraded to windows 10 yesterday and now i keep getting a blue screen. IRQL_NOT_LESS_OR_EQUALI think this is because of a bad driver? any ideas on how i can fix this. I already reinstalled my graphic card drivers with no succes.:(
BSOD Crashes and Debugging
Solved BSOD - usbehci.sys - IRQL_NOT_LESS_OR_EQUAL
I have already had 7 of them, just got one when trying to post this. I suspect my USB sound card. So far they have happened only in Windows, not in games, when listening to the music on youtube or via Radiosure, sometimes I was not even at PC, so I...
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 22:35.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums