Windows 10: BSOD only after waking computer from sleep 0x000000be

Page 1 of 4 123 ... LastLast
  1.    01 Sep 2015 #1

    BSOD only after waking computer from sleep 0x000000be


    So upgraded from 8.1 Pro. I never had any problems with 8.1 other than the occasional crash here and there, but nothing exceptional. Now every time that I try to wake the computer from sleep I get a stop message that states that it tried to write to read only memory.

    I have run memtest86 overnight with 7 iterations and it passed them with no errors. I ran a burn test on my CPU to see if it was overheating, with it never going above 63 degrees Celsius even on the most extreme test.

    The crashes are not random. They only happen when I try to wake the computer from sleep. However, it looks like what is causing them is random.

    I have never overclocked my computer and I have never touched the frequencies with the memory.
      My ComputerSystem Spec


  2. Posts : 9,031
    Windows 10 Enterprise and Pro/Windows 7 Enterprise/Linux Mint
       01 Sep 2015 #2

    Hello, deepeyes100 and welcome to the forums. This is what your dump files say.

    Code:
    Use !analyze -v to get detailed debugging information.
    BugCheck BE, {ffffd000000020a8, 8000000000900121, ffffd00025df35b0, a}
    *** WARNING: Unable to verify timestamp for mvs91xx.sys
    *** ERROR: Module load completed but symbols could not be loaded for mvs91xx.sys
    Probably caused by : storport.sys ( storport!RaidXrbSetDataBufferAddress+12f9b )
    Followup: MachineOwner
    The mvs91xx is your Marvell Sata/Raid driver. Due to the date of the driver, it does not seem that it is a Windows 10 driver.

    Code:
     mvs91xx
    start             end                 module name
    fffff800`60680000 fffff800`60712000   mvs91xx  T (no symbols)           
        Loaded symbol image file: mvs91xx.sys
        Image path: \SystemRoot\System32\drivers\mvs91xx.sys
        Image name: mvs91xx.sys
        Timestamp:        Wed Jun 06 22:09:20 2012 (4FD01B60)
        CheckSum:         00050CA8
        ImageSize:        00092000
        Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
    Are you running Raid? Also another dump lists

    Code:
    ATTEMPTED_WRITE_TO_READONLY_MEMORY (be)
    An attempt was made to write to readonly memory.  The guilty driver is on the
    stack trace (and is typically the current instruction pointer).
    When possible, the guilty driver's name (Unicode string) is printed on
    the bugcheck screen and saved in KiBugCheckDriver.
    Arguments:
    Arg1: ffffd000000020a8, Virtual address for the attempted write.
    Arg2: 8000000000900121, PTE contents.
    Arg3: ffffd0002812ad50, (reserved)
    Arg4: 000000000000000b, (reserved)
    Debugging Details:
    ------------------
    
    CUSTOMER_CRASH_COUNT:  1
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    BUGCHECK_STR:  0xBE
    PROCESS_NAME:  SettingSyncHos
    I believe that is a windows process that synchronizes settings.

    Please go to your motherboard's web site and download Windows 10 drivers for the Marvell Sata Controller . Your Motherboard has Windows 10 drivers and can be found here. http://www.gigabyte.com/products/pro...px?pid=4139#dl

    Please let me know if you are running raid and please complete listing your system specs at the bottom left of your last post. I would like to know your PSU, Hard Drives, CPU cooler and the other items in the list. These are the instructions I usually give and I hope it may help you. Knowing these will help us to help you.

    Please go to your last post and in the bottom left corner click 'My System Specs'. there is a link there to update your system specs, click it and fill them all out in as much detail as possible. Please list Manufacturer and Model, and list Desktop or Laptop. If it is an OEM, please list the Manufacturer and Model number. Please be sure to list your PSU and CPU cooler. If you would like to know what we would like, please click 'My System Specs' at the bottom left of this post and see mine.
      My ComputersSystem Spec

  3.    02 Sep 2015 #3

    Hello and thanks for the welcome and reply. I updated my specs to the best of my abilities.

    I guess since I'm not running a dual graphics card set up I'm not running Raid. This is a self created computer and hopefully it won't be my last.

    I went ahead and downloaded the Marvell driver and will update on that.

    *update* no dice on marvell driver. I was able to see the welcome screen before the blue screen though...

    I've uploaded a new dump list. Two new ones from today (Wednesday sept 2)
      My ComputerSystem Spec


  4. Posts : 9,031
    Windows 10 Enterprise and Pro/Windows 7 Enterprise/Linux Mint
       02 Sep 2015 #4

    While I tak a look at your dump files, please try to boot into safe mode. https://www.tenforums.com/tutorials/2...dows-10-a.html
      My ComputersSystem Spec

  5.    02 Sep 2015 #5

    With command prompt?
      My ComputerSystem Spec


  6. Posts : 9,031
    Windows 10 Enterprise and Pro/Windows 7 Enterprise/Linux Mint
       02 Sep 2015 #6

    Please go into BIOS and tell me what your sata controllers are set to. You will have 2 sata controllers, one for the chipset and another for the Marvell Ports. The Marvell ports are an add on controller and will not get as good performance as the chipset controller will. You should have your SSD and hard drive plugged into sata ports ) and 1. The Marvell ports are Gsata ports 6/7/8. Also Marvell has a reputation of not getting along well with SSDs. If you change sata ports, you will need to also change the boot options.

    Also, please make sure you have the latest Firmware for your SSD. If your SSD has a toolbox or utilities, please use them to chech the health of your SSD.

    You are going to have to use the advanced startup options from within the OS. In the link I provided you will see another link to Advanced Startup options. https://www.tenforums.com/tutorials/2...dows-10-a.html

    This is what your dump files say.

    Code:
    ATTEMPTED_WRITE_TO_READONLY_MEMORY (be)
    An attempt was made to write to readonly memory.  The guilty driver is on the
    stack trace (and is typically the current instruction pointer).
    When possible, the guilty driver's name (Unicode string) is printed on
    the bugcheck screen and saved in KiBugCheckDriver.
    Arguments:
    Arg1: ffffd00025a000a8, Virtual address for the attempted write.
    Arg2: 8000000000900121, PTE contents.
    Arg3: ffffd00025fb15b0, (reserved)
    Arg4: 000000000000000b, (reserved)
      My ComputersSystem Spec

  7.    02 Sep 2015 #7

    Alright SATA controller (s) are enabled and set to AHCI

    Marvell is in AHCI mode but it all ports it states Not Present. For both port 0 and port 1 and the same situation for GSATA. ACHI mode and ports not present.

    Will check on SSD firmware. There is no drivers or firmware on the Toshiba website for this particular model of SSD. Is there some sort of program on the SSD itself that I could find? Any notions as to where I would find that?
      My ComputerSystem Spec


  8. Posts : 9,031
    Windows 10 Enterprise and Pro/Windows 7 Enterprise/Linux Mint
       02 Sep 2015 #8

    Which ports do show drives connected?
      My ComputersSystem Spec

  9.    02 Sep 2015 #9

    On the marvell ATA controller configuration page it shows no ports connected.

    Alright sorry just found the ATA port information.
    ATA port 0 is empty
    PORT 1 Has the 1 TB hard drive
    Port 2 has my DVD drive (which I forgot to list sorry)
    Port 3 has my SSD on it which contains the OS
    Port 4 is empty
    Port 5 is empty
      My ComputerSystem Spec


  10. Posts : 9,031
    Windows 10 Enterprise and Pro/Windows 7 Enterprise/Linux Mint
       02 Sep 2015 #10

    What about the chipset ports? They have to show up somewhere. Also, see if you can find the latest firmware for your SSD here http://support.toshiba.com/drivers Also, see if there are any Utilities for your drive.
      My ComputersSystem Spec


 
Page 1 of 4 123 ... LastLast

Related Threads
BSOD Error After Waking Up from Sleep in BSOD Crashes and Debugging
I put my PC to sleep and when I wake it up, I'm getting no display on my monitors although the PC itself wakes up. I reboot the computer and encounter a BSOD "VIDEO_TDR_FAILURE (nvlddmkm.sys)" I recently updated from Windows 7 to Windows 10. ...
BSOD sadface when waking up from sleep in BSOD Crashes and Debugging
I normally always sleep my PC, rarely shut it down. So I slept my PC like normal after updating to windows 10, and sadface BSOD came up. Tried it again, happened again. It keeps happening, 100% of the time I wake it up, BSOD. Not sure what is going...
Just to preface this I have not received a BSOD when this happens so I hope I'm still posting this in the correct location. However my laptop just freezes completely and I have to do a hard shutdown (holding the power button until it shuts off)...
Hello, since upgrading to Windows 10, my laptop has consistently crashed when waking up from sleep mode with the DPC Watchdog Violation given on the BSOD. This problem only began happening after the upgrade to Windows 10. So far I've attempted a...
Hello guys.... I just upgraded to Windows 10 and one problem that has been bugging me is that everytime I wake the computer from sleep it comes back up and then after a few seconds (like 3-4) I'm getting a BSOD with the message...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 04:24.
Find Us