Hello saifullah ,
Thanks for providing the logs. I have looked through them and here are my findings:
The BSOD crashes were analysed by WinDBG and the following summarises the auto analysis of the dumps:
Code:
BugCheck A, {17d, 2, 0, fffff8047fc1e078}
Probably caused by: Netwtw08.sys ( Netwtw08+63ca2 )
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
BugCheck 3B, {c0000005, ffff90d8d3de76fe, fffffe0acba8a710, 0}
Probably caused by: Unknown_Image ( PAGE_NOT_ZERO )
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
BugCheck 1A, {41792, ffffbf3ffc6fec30, 4000000000000, 0}
Probably caused by: memory_corruption ( ONE_BIT )
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
BugCheck D1, {110, 2, 0, fffff8072e24fd02}
Probably caused by: hardware ( NETIO!NetioDereferenceNetBufferListChain+103 )
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
BugCheck D1, {780, 2, 0, fffff806101408e5}
Probably caused by: NETIO.SYS ( NETIO!KfdCheckClassifyNeededAndUpdateEpoch+25 )
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
So there are two things to look into:
1. There is a possible problem with the RAM as @tomdsr has pointed out. I would suggest that it could be as simple as that too high a memory clock speed is being used for your system. Please remove the XMP overclock to bring the speed down to 2933MHz. This will bring you into the recommended speeds for your processor (see https://www.amd.com/en/products/cpu/amd-ryzen-5-2600x)
2. The driver for the INTEL wireless network Netwtw08.sys may need updating. Try on the motherboard support pages first or if necessary go to the INTEL Driver Support website.