Page 1 of 4 123 ... LastLast
  1.    26 Aug 2015 #1
    Join Date : Aug 2015
    Cologne
    Posts : 28
    Microsoft Windows 7 Professional 64-Bit

    nvlddmkm.sys Bluescreen / Windows 10


    Hello,

    sorry, i have no Bug Report yet cause i downgraded back to Win7 at the moment.

    The Problem i have/ had is:

    After upgrade Win7 -> Win10 i get after 5-10 Minutes latest a Bluescreen caused by:

    nvlddmkm.sys

    I tried differnet drivers from nvidia from Win7 to latest ...,81 (for Win10) all the same.
    Once an nVidia Driver is installed the system crashes.

    I also tried to let Win Update install only.. no difference.
    Once the card seems to be regulary installed and running in device manager with correct drivers. The system crashes.
    My Card: GeForce 9600 GSO Fatality (Win10 able)

    Read a lot about, but found no help yet.
    Hope i get luck here!

    Any idea or way i can fix the problem? Cause i really would like to use Win10.

    Thanks.
      My ComputerSystem Spec
  2.    26 Aug 2015 #2
    Join Date : Jun 2015
    Posts : 12,668
    Windows 10 Pro

    Please read BSOD Posting Instructions

    Please fill in your system specs
    Please go to this site and download the tool. The tool will give you detailed information about your system specs, please fill your system specs more completely in.
    How to fill in your system specs:
    Attachment 33889

    Attachment 33890

      My ComputersSystem Spec
  3.    26 Aug 2015 #3
    Join Date : Aug 2015
    Cologne
    Posts : 28
    Microsoft Windows 7 Professional 64-Bit
    Thread Starter

    Thanks for your reply.. i will do this later, at work at the moment.
    Only the crash dump i canīt give.
      My ComputerSystem Spec
  4.    26 Aug 2015 #4
    Join Date : Jun 2015
    Posts : 12,668
    Windows 10 Pro

    Working in the night?
    Unfortunately we can't help you without at least 1 dump.
      My ComputersSystem Spec
  5.    26 Aug 2015 #5
    Join Date : Aug 2015
    Cologne
    Posts : 28
    Microsoft Windows 7 Professional 64-Bit
    Thread Starter

    Yes, i have shift.. late night and early .

    OK, can u short describe where i find the dump.
    I will upgrade again to Win10.
    The failure is reproducable.
    Hope i have enough time to get the file or also in Safe Mode available?
    I think next day i have the file then.
    Will post it asap.
      My ComputerSystem Spec
  6.    26 Aug 2015 #6
    Join Date : Jun 2015
    Posts : 12,668
    Windows 10 Pro

    Don't upgrade again yet, first we need to make sure there are no problems regarding corruption of files, drivers or hardware problems.

    Please open admin command prompt (right click windows logo > command prompt (admin)), copy/paste command "sfc /scannow" (without quotes).
    We want sfc to say "Windows Resource Protection did not find any integrity violations".
    If sfc doesn't say this when finished you need to reboot for sfc to fix the problems, after you rebooted try sfc /scannow again.
    Keep doing sfc /scannow command, reboot, sfc /scannow a few times.
      My ComputersSystem Spec
  7.    26 Aug 2015 #7
    Join Date : Aug 2015
    Cologne
    Posts : 28
    Microsoft Windows 7 Professional 64-Bit
    Thread Starter

    Hmm.. ok, hope that will help..
    Cause Windows 7 runs without any problem.
    I will first do the steps u wrote..
    I will report if there is anything found.
    If not i try the upgrade again to gain the crash dump.
    I have an Image of the running Win7 sytsem so only the Win10 installation will take the time.
    To go back to 7 is no problem.
      My ComputerSystem Spec
  8.    26 Aug 2015 #8
    Join Date : Jun 2015
    Posts : 12,668
    Windows 10 Pro

    Quote Originally Posted by Nozmint View Post
    Hmm.. ok, hope that will help..
    Cause Windows 7 runs without any problem.
    I will first do the steps u wrote..
    I will report if there is anything found.
    If not i try the upgrade again to gain the crash dump.
    I have an Image of the running Win7 sytsem so only the Win10 installation will take the time.
    To go back to 7 is no problem.
    Please don't try to upgrade to windows 10, until we can say there are no problems.
    Sfc (System File Check) only checks for the files of windows.
    There are a couple of more tests to go, but starting with sfc /scannow.
      My ComputersSystem Spec
  9.    27 Aug 2015 #9
    Join Date : Aug 2015
    Cologne
    Posts : 28
    Microsoft Windows 7 Professional 64-Bit
    Thread Starter

    Updated System specs...

    SFC ends with: "Windows Resource Protection did not find any integrity violations" in Win7

    What shall i do next?


    Btw installed Win10 on other HD Clean.. seems working first.. installed all drivers and updates.. started then to install Firefox.. and crashed with Bluescreen (nvlddmkm.sys).. i will have a look for the crashdump if iīm back from work tomorrow.
    itīs the same BSOD like the upgrade ones so i can work with 7 and test 10 on other HD.
      My ComputerSystem Spec
  10.    27 Aug 2015 #10
    Join Date : Jun 2015
    Posts : 12,668
    Windows 10 Pro

    Please check your windows updates history.
    If there are any driver updates for Nvidia drivers then you have found the problem.
    In my sign you can find the tutorial for disabling driver updates in windows updates.
      My ComputersSystem Spec

 
Page 1 of 4 123 ... LastLast


Similar Threads
Thread Forum
Continuous BSOD // VIDEO TDR FAILURE (nvlddmkm.sys)
Hello, I recently upgraded to Windows 10, since upgrading I'm having pretty regular BSOD Crashes where the following error message appears; VIDEO TDR FAILURE (nvlddmkm.sys) It appears to happen at completly random times, could be watching...
BSOD Crashes and Debugging
BSOD 2-10min after Win10 update (nvlddmkm.sys/ntoskrnl/pci.sys)
Hello, After my upgrade to Windows 10 I'm been experiencing BSOD every 2 to 30 minutes (sometimes even at startup). I tired uninstalling drivers and installing from safe boot mode, without success. I've uploaded my last few crash dumps (last...
BSOD Crashes and Debugging
Reboot loop, no bluescreen, no auto recovery.
Yes, I've done "disable automatic restart after failure". The machine actually is not bluescreening. It brings up the windows logo, the white balls spin around a few times. Screen goes blank for two seconds and the logo and spinning balls come back....
General Support
Solved bluescreen with watchdog violation error (zip file included)
Hello, I upgraded yesterday and everything looked okay, but today I keep getting bluescreen with watchdog violation error like every 10 minutes. I don't know if it is win10 bug or I messed something up myself -- today I got some kind of malicious...
BSOD Crashes and Debugging
BlueScreen when shutting down a VMWare Workstation OS
Consistently receiving a DPC_WATCHDOG_VIOLATION bluescreen when shutting down a vmware workstation OS (in this case a windows 7 OS). Was running on VMWare workstation 10, upgraded to 11 but am still experiencing this behaviour. Side effect of...
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Đ Designer Media Ltd
All times are GMT -5. The time now is 19:18.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums