Bsod 0x124 whea_uncorrectable_error. Nothing works.

Page 1 of 2 12 LastLast

  1. Posts : 9
    Windows 10
       #1

    Bsod 0x124 whea_uncorrectable_error. Nothing works.


    First sorry for creating a duplicate post.

    I am insider since before the build 10240, and always tried to resolve this error by myself.

    I researched a lot and found this forum, which even had posts about my problem.

    After trying all a bit that I found surfing the internet and who recommended this forum about my problem and failed, to establish the same topic about the error 0x124 to try to help me.

    The error occurs whenever I try to play a game and rarely when I'm in the browser (firefox) and watching movies in Media Player Classic. Sometimes I get to play more than an hour and sometimes even 10 minutes.

    Steps I tried to solve my problem:

    - Updating Drivers and latest builds. (I am currently in build 10532)
    - Uninstall drive the video card and install the newest. (Several times)
    - Uninstall drive the video card using the DDU and install the newest. (Several times)
    - Switch configurations of the game to leave him "lighter".
    - Changing some configurations of energy found in the inernet. (Reversing later)
    - Change some settings in the bios to give a "boost" in the processor (I'm not overclocker, reversing later.).
    - Change the configurations in the bios for "Run fail-safe mode."
    - Used the driver verifier (twice)

    Commands tried.

    - Run the chkdsk command. (Sometimes)
    - Run the sfc / scannow. (Sometimes)
    - Run the command dism / online / cleanup-image / restorehealth. (Sometimes)

    And last tests I tried after reading the forum posts.

    - Prime95
    http://www.mediafire.com/view/kzu20a...y/Prime95.png#

    - MemTest86+
    http://www.mediafire.com/view/3s7b3995t3xgbw1/MemTest86%2B.JPG#
    http://www.mediafire.com/view/koasuvbzk0kcvwg/MemTest86%2B%20Correto.JPG# (the right test)

    - SeaTools
    http://www.mediafire.com/view/jkv97p.../SeaTools.JPG#

    - Chkdsk
    http://www.mediafire.com/view/xy4ai3...al/chkdsk.png#

    - Furmark
    http://www.mediafire.com/view/j1vki8xdh7vvwd3/furmark.png#

    In tests there were no any error not even Bsod.

    - When I was installing windows 10 I had two hard drives a 500gb with Windows 7 and other 3tb empty so I installed the w10 in 3tb and so I had a dual boot windows 7 and 10. Then I had to retire the 500gb hd, and I was a single boot.

    * My question is whether this installation mode is considered a clean install?

    And finally sorry for my bad english I am Brazilian.

    --Edit--

    New log in Build 10532
    Last edited by Slayer17; 29 Aug 2015 at 14:13.
      My Computer


  2. Posts : 14,901
    Windows 10 Pro
       #2

    A quick tip looking at the results of your tests.

    Memtest86+ needs to run for 8 complete passes or until you receive an error. If you receive an error, stop the test. Even 1 error is a fail. Each pass tests a different part of the ram and each of the 10 tests in each pass tests something different. It takes a minimum of 8 passes in the same session to completely test the ram, more passes are better. Running Memtest86+ for less then 8 passes isn't worth it to run. It is quite a long test and will take several hours depending on how much ram you have. Due to the time length it is best to run overnight.
      My Computers


  3. Posts : 9
    Windows 10
    Thread Starter
       #3

    axe0 said:
    A quick tip looking at the results of your tests.

    Memtest86+ needs to run for 8 complete passes or until you receive an error. If you receive an error, stop the test. Even 1 error is a fail. Each pass tests a different part of the ram and each of the 10 tests in each pass tests something different. It takes a minimum of 8 passes in the same session to completely test the ram, more passes are better. Running Memtest86+ for less then 8 passes isn't worth it to run. It is quite a long test and will take several hours depending on how much ram you have. Due to the time length it is best to run overnight.
    Sorry for the mistake.

    8 passes? It looks like I'll have to stay more than 24 hours to get through the test.
      My Computer


  4. Posts : 14,901
    Windows 10 Pro
       #4

    Do you have results from running MemTest86+ at least for 8 passes or until you have an error?
      My Computers


  5. Posts : 9
    Windows 10
    Thread Starter
       #5

    axe0 said:
    Do you have results from running MemTest86+ at least for 8 passes or until you have an error?
    Yes, Is the first thread, I edited to leave the cleanest post.

    http://www.mediafire.com/view/koasuv...20Correto.JPG#
      My Computer


  6. Posts : 14,901
    Windows 10 Pro
       #6

    Slayer17 said:
    Yes, Is the first thread, I edited to leave the cleanest post.

    http://www.mediafire.com/view/koasuv...20Correto.JPG#
    Because with edits we don't get notified please add a new post next time
      My Computers


  7. Posts : 14,901
    Windows 10 Pro
       #7

    Please update your Realtek HD Audio driver Latest Realtek HD Audio driver - Windows 10 Forums

    Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
    Please remove Daemon Tools and run the SPD pass through remover.
    1. Uninstall Daemon Tools
    2. Download the SPTD standalone installer and follow these steps:
      • Double click the executable to open it
      • Click on the button shown below


    If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window.


    Please uninstall all Gigabyte utilities.

    Please run sfc /scannow and DISM /Online /Cleanup-Image /RestoreHealth again.

    Please make sure your pc is configured for small dump files How to configure minidump | Windows 10 tutorial

    A WHEA error is pretty much a hardware error, although it can be caused by drivers. In many cases the cause is overclocking.
      My Computers


  8. Posts : 9
    Windows 10
    Thread Starter
       #8

    Hi axe0, after have done everything you told me.

    http://www.mediafire.com/view/dx4ff9...89s/tests.png#

    I had three Bsod.

    Two bsod when I'm playing, and when i see that the device manager has a amd audio driver and try to uninstall it.

    Once again I tried to uninstall the audio drive amd, except that it returns.
    I have to uninstall it along with the video card driver using the DDU?

    I just get install version 6.0.1.7541. how I can update it to version 6.0.1.7586? I downloaded the files just do not know what to do.

    http://www.mediafire.com/view/bp0a14...20Manager.png#

    Thanks for helping me.
      My Computer


  9. Posts : 14,901
    Windows 10 Pro
       #9

    Double click the file and follow the installation carefully.

    Have you removed Daemon tools?
    Have you removed all the Gigabyte Utilities if you have?
    Have you ran sfc /scannow in an admin command prompt?
    Have you configured your pc for small dumps?
      My Computers


  10. Posts : 9
    Windows 10
    Thread Starter
       #10

    axe0 said:
    Double click the file and follow the installation carefully.

    Have you removed Daemon tools?
    Have you removed all the Gigabyte Utilities if you have?
    Have you ran sfc /scannow in an admin command prompt?
    Have you configured your pc for small dumps?
    Yes
    Donīt have any Gigabyte Utilites software in my PC.
    Yes
    Yes

    I not put more screenshots in the post.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Đ Designer Media Ltd
All times are GMT -5. The time now is 17:33.
Find Us




Windows 10 Forums