Windows 10: Bsod 0x124 whea_uncorrectable_error. Nothing works.

Page 2 of 2 FirstFirst 12

  1. Posts : 11,533
    Windows 10 Pro
       31 Aug 2015 #11

    What did sfc /scannow say?
    Please use the tool again and upload the zip file, I would need new information to prevent confusion with the software.
      My ComputersSystem Spec

  2.    31 Aug 2015 #12

    axe0 said: View Post
    What did sfc /scannow say?
    Please use the tool again and upload the zip file, I would need new information to prevent confusion with the software.
    sfc / scannow says

    check 100% complete

    The Windows Resource Protection did not find infirm integrity violation
      My ComputerSystem Spec


  3. Posts : 11,533
    Windows 10 Pro
       31 Aug 2015 #13

    According to the information, you still have Daemon tools.
    Please remove Daemon tools.

    Please open taskmanager and msconfig:
    • In taskmanager
      • go to the tab startup
      • disable everything


    • In msconfig go to the tab services
      • Check 'hide microsoft services'
      • Uncheck all other services
      • Click apply, click ok
      • Reboot if asked



    Does the problem still persist in a clean boot?
      My ComputersSystem Spec


  4. Posts : 11,533
    Windows 10 Pro
       31 Aug 2015 #14

    Also, please try driver verifier



    Bsod 0x124 whea_uncorrectable_error. Nothing works. Diagnostic Test Bsod 0x124 whea_uncorrectable_error. Nothing works.
     DRIVER VERIFIER

    warning   Warning
    Please make a backup of your important files and get your rescue media or create one.
    Please create a restore point.

    Please read and run driver verifier.

    Driver verifier stresses your drivers and will crash your pc if any driver fails due to a violation.

    Driver verifier should be performed for a max of 48 hours, or when you have a bluescreen, whatever comes first.

    If driver verifier has found a violation and you can't get back into windows normally, try to boot into safe mode and reset in safe mode driver verifier, or in the troubleshooting options open command prompt and type verifier /reset.

    Note   Note
    Your system will act very sluggishly while driver verifier is enabled, this is normal as your drivers will be being subjected to heavy testing in order to make them crash.
      My ComputersSystem Spec

  5.    31 Aug 2015 #15

    According to the information, you still have Daemon tools.
    Please remove Daemon tools.
    Funny, I've removed the daemon tools like you told me.

    Does the problem still persist in a clean boot?
    Yes all the programs that start with windows were unchecked and I still had a bsod

    Please read and run driver verifier.

    Driver verifier stresses your drivers and will crash your pc if any driver fails due to a violation.

    Driver verifier should be performed for a max of 48 hours, or when you have a bluescreen, whatever comes first.

    If driver verifier has found a violation and you can't get back into windows normally, try to boot into safe mode and reset in safe mode driver verifier, or in the troubleshooting options open command prompt and type verifier /reset.
    I've used the verifier driver twice and had bsod before you even start the test.

    bsod say: PAGE_FAULT_IN_NONPAGED_AREA is on file 082815-23703-01.dmp on 28/08 in zip.

    (New bsod after clean boot)
      My ComputerSystem Spec


  6. Posts : 11,533
    Windows 10 Pro
       31 Aug 2015 #16

    My problem is that I can't analyse the dump files for some reason which i don't know.
    So I'm forced to do some basic troubleshooting instead of specific troubleshooting, but right now it looks like the cause is your mainboard.
      My ComputersSystem Spec

  7.    31 Aug 2015 #17

    axe0 said: View Post
    My problem is that I can't analyse the dump files for some reason which i don't know.
    So I'm forced to do some basic troubleshooting instead of specific troubleshooting, but right now it looks like the cause is your mainboard.
    Strange because my motherboard is until new, of 2013 and this did not occur in windows 7.
      My ComputerSystem Spec


  8. Posts : 11,533
    Windows 10 Pro
       31 Aug 2015 #18

    Please make sure your BIOS settings are set to default.
    The only reason I can think of why there are problems with the dump files is hardware damage.
    Please do the following tests again
    Please Run Memtest86+

    information   Information
    Please download from this site only http://www.memtest.org/ in the middle of the page are the Download links, you can download the ISO.zip or the Auto USB Flash Drive installer.zip
    Extract the Zip file. If you chose the ISO image, burn it to a CD using Windows Disk Image Burner or any Image burner you may have. If you downloaded the Auto USB installer, extract it, insert your USB 2.0 Flash Drive and take note of the drive letter. Run the installer, select the Flash Drive Letter, check the format box and press next. It will install memtest86+ to a flash drive. You can use either V4.20 or V5.01. Boot from your selected media. If you use V5.01 it will tell you to press certain buttons at the start, please press no buttons. The test will begin on it's own and continue to run until you stop it. It needs to run for 8 complete passes or until you receive an error. If you receive an error, stop the test. Even 1 error is a fail. Each pass tests a different part of the ram and each of the 10 tests in each pass tests something different. It takes a minimum of 8 passes in the same session to completely test the ram, more passes are better. It is quite a long test and will take several hours depending on how much ram you have. Due to the time length it is best to run overnight. If you have any questions, please do not hesitate to ask.




    Bsod 0x124 whea_uncorrectable_error. Nothing works. Diagnostic Test Bsod 0x124 whea_uncorrectable_error. Nothing works.
     CPU STRESS TEST

    Please run Prime95 to test your CPU: Prime95 tutorial

    Note   Note
    If you're overclocking anything, please stop it and set everything back to default while troubleshooting

    warning   Warning
    Your CPU temperature will rise quickly while under this test. Keep a keen eye on the temperatures and abort the test if the temperatures rise too high


    Please read this tutorial for testing your GPU

    If these tests come again with a good result and your hard drive is also fine, then it is most likely the mainboard.
      My ComputersSystem Spec


  9. Posts : 11,533
    Windows 10 Pro
       31 Aug 2015 #19

    Please try a clean install of windows 10, backup important and personal files first.
    A clean install may solve the problem if it is software related.

    If all the hardware tests don't determine the cause and a clean install doesn't solve the problem, then it is for sure the mainboard.
      My ComputersSystem Spec


 
Page 2 of 2 FirstFirst 12

Related Threads
BSOD 0x124 hal.dll crash Windows 10 in BSOD Crashes and Debugging
Hi! I've recently got this BSOD, I don't know what is the problem. (Sorry this is my first post here if I did something wrong.)
Hello, I have been having problems with Kernel power error. It has been causing bsods while playing games for more than a hour. I am suspecting it is a problems with my drivers, or that it is my system. Specs: 4690k stock 980ti EVGA acx+ ASUS...
Hello guys.... I just upgraded to Windows 10 and one problem that has been bugging me is that everytime I wake the computer from sleep it comes back up and then after a few seconds (like 3-4) I'm getting a BSOD with the message...
Solved BSOD playing CSGO WHEA_UNCORRECTABLE_ERROR in BSOD Crashes and Debugging
I got this error while playing csgo and while I was using google chrome. thanks if anyone can help
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 23:40.
Find Us