Page 2 of 3 FirstFirst 123 LastLast

  1. Joined : Oct 2013
    NW Florida
    Posts : 6,740
    Windows 10 Enterprise and Pro/Windows 7 Enterprise/Linux Mint
       26 Aug 2015 #11

    volie, this time it is listing the Realtek Lan Driver but still blaming it on Memory corruption

    Code:
    Use !analyze -v to get detailed debugging information.
    BugCheck BE, {fffff80126c02818, 2277e4121, fffff803ed243570, a}
    *** WARNING: Unable to verify timestamp for rt640x64.sys
    *** ERROR: Module load completed but symbols could not be loaded for rt640x64.sys
    Probably caused by : memory_corruption
    Followup: memory_corruption
    ---------
    Just as a suggestion, could you remove the Intel card since you are not using it anyway and see if that makes a difference?
      My System SpecsSystem Spec


  2. Joined : Aug 2015
    Posts : 16
    Windows 10 Home
       30 Aug 2015 #12

    I've been out for a while, but I did use my computer a few times since I removed the Intel card. I still have encountered a couple BSOD's. Hopefully I can find out what the problem is.
      My System SpecsSystem Spec


  3. Joined : Oct 2013
    NW Florida
    Posts : 6,740
    Windows 10 Enterprise and Pro/Windows 7 Enterprise/Linux Mint
       30 Aug 2015 #13

    Your last 2 dumps

    Code:
    BugCheck BE, {fffff800f6f823b8, 2276d1121, fffff8003e242790, a}
    *** WARNING: Unable to verify timestamp for rt640x64.sys
    *** ERROR: Module load completed but symbols could not be loaded for rt640x64.sys
    Probably caused by : NETIO.SYS ( NETIO!NetioCompleteNetBufferAndNetBufferListChain+9 )
    Followup: MachineOwner

    Code:
    BugCheck BE, {fffff80064f52818, 2277e4121, fffff800af9ef570, a}
    *** WARNING: Unable to verify timestamp for rt640x64.sys
    *** ERROR: Module load completed but symbols could not be loaded for rt640x64.sys
    Probably caused by : memory_corruption
    Followup: memory_corruption
    It is still your network. The NTIO is the Network I/O Manager and the rt640x64.sys is your Realtek 8101E/8168/8169 NDIS 6.40 64-bit Driver.

    When you removed the Intel Card, did you uninstall the driver? If not, please do that. Also, are you using the Windows provided driver or the one from Gigabyte?
    Last edited by essenbe; 30 Aug 2015 at 13:52.
      My System SpecsSystem Spec


  4. Joined : Aug 2015
    Posts : 16
    Windows 10 Home
       31 Aug 2015 #14

    Well, good news is that I haven't had a memory corruption or a netio.sys BSOD, but now I've encountered different ones. Here are the dump files from the recent ones.
      My System SpecsSystem Spec


  5. Joined : Oct 2013
    NW Florida
    Posts : 6,740
    Windows 10 Enterprise and Pro/Windows 7 Enterprise/Linux Mint
       31 Aug 2015 #15

    Code:
    CRITICAL_STRUCTURE_CORRUPTION (109)
    This bugcheck is generated when the kernel detects that critical kernel code or
    data have been corrupted. There are generally three causes for a corruption:
    1) A driver has inadvertently or deliberately modified critical kernel code
     or data. See http://www.microsoft.com/whdc/driver...tPatching.mspx
    2) A developer attempted to set a normal kernel breakpoint using a kernel
     debugger that was not attached when the system was booted. Normal breakpoints,
     "bp", can only be set if the debugger is attached at boot time. Hardware
     breakpoints, "ba", can be set at any time.
    3) A hardware corruption occurred, e.g. failing RAM holding kernel code or data.
    Arguments:
    Arg1: a3a01f592ec14700, Reserved
    Arg2: 0000000000000000, Reserved
    Arg3: ee3274faf73cc52d, Failure type dependent information
    Arg4: 0000000000000101, Type of corrupted region, can be
     0 : A generic data region
     1 : Modification of a function or .pdata
     2 : A processor IDT
     3 : A processor GDT
     4 : Type 1 process list corruption
     5 : Type 2 process list corruption
     6 : Debug routine modification
     7 : Critical MSR modification
    
    DUMP_FILE_ATTRIBUTES: 0x8
      Kernel Generated Triage Dump
    PG_MISMATCH:  10
    MEMORY_CORRUPTOR:  ONE_BIT
    Code:
    Use !analyze -v to get detailed debugging information.
    BugCheck A, {fffffab005332672, 2, 0, fffff8016074c812}
    Probably caused by : memory_corruption ( nt!MiDecrementAndInsertStandbyPages+d2 )
    Followup: MachineOwner
    Make sure your SSD Firmware is up to date and see if they have a utility to test it's health. Please run Seatools for DOS on your Mechanical Hard Drive http://www.sevenforums.com/tutorials...s-how-use.html

    Are you running the X64 version of Chrome? If so, please uninstall it and install the X86 version.
      My System SpecsSystem Spec


  6. Joined : Aug 2015
    Posts : 16
    Windows 10 Home
       14 Sep 2015 #16

    Hello, its been a while but my computer is once again getting blue screens. As suggested, I did update my SSD firmware to the most recent version. I also ran the SeaTools test and I passed the tests. As such, I am no quite sure what to do at this point. Here is my most recent dump files. Thanks once again.
      My System SpecsSystem Spec


  7. Joined : Oct 2013
    NW Florida
    Posts : 6,740
    Windows 10 Enterprise and Pro/Windows 7 Enterprise/Linux Mint
       15 Sep 2015 #17

    Please Run Memtest86+

    information   Information
    Please download from this site only http://www.memtest.org/ in the middle of the page are the Download links, you can download the ISO.zip or the Auto USB Flash Drive installer.zip
    Extract the Zip file. If you chose the ISO image, burn it to a CD using Windows Disk Image Burner or any Image burner you may have. If you downloaded the Auto USB installer, extract it, insert your USB 2.0 Flash Drive and take note of the drive letter. Run the installer, select the Flash Drive Letter, check the format box and press next. It will install memtest86+ to a flash drive. You can use either V4.20 or V5.01. Boot from your selected media. If you use V5.01 it will tell you to press certain buttons at the start, please press no buttons. The test will begin on it's own and continue to run until you stop it. It needs to run for 8 complete passes or until you receive an error. If you receive an error, stop the test. Even 1 error is a fail. Each pass tests a different part of the ram and each of the 10 tests in each pass tests something different. It takes a minimum of 8 passes to completely test the ram, more passes are better. It is quite a long test and will take several hours depending on how much ram you have. Due to the time length it is best to run overnight. If you have any questions, please do not hesitate to ask.

    When you have run the test, please let me know the results and then upload the BSOD Posting instructions BSOD - Posting Instructions - Windows 10 Forums. Upload them here. This will tell you how Screenshots and Files - Upload and Post in Ten Forums - Windows 10 Forums.
      My System SpecsSystem Spec


  8. Joined : Aug 2015
    Posts : 16
    Windows 10 Home
       16 Sep 2015 #18

    This is what I had after I ran the test, I think this is what the results are.
    As before the files are there.
    Tell me if I need to provide anything else.
    Attachment 37858
      My System SpecsSystem Spec


  9. Joined : Oct 2013
    NW Florida
    Posts : 6,740
    Windows 10 Enterprise and Pro/Windows 7 Enterprise/Linux Mint
       16 Sep 2015 #19

    If you are overclocking, please set everything back to default levels. Please uninstall any Gigabyte utilities. Please download and install CPUz http://www.cpuid.com/softwares/cpu-z.html and post screenshots (Screenshots and Files - Upload and Post in Ten Forums) of the CPU, Mainboard, Memory and SPD tabs. On the SPD tabs you can select each Dimm Slot from a dropdown in the upper left of the SPD tab. Just provide screenshots of the tabs populated with Memory.

    Next please right click on the start icon and select Command prompt administrator, give admin permissions and copy/paste this into the window that opens and press enter sfc /scannow . If you decide to type it in, please notice the space between the sfc and the /. We want it to say no integrity violations were found. If it says there where corrupt files that could not be repaired, please reboot and run it again. You may have to run it 3 times with reboots in between each time.

    Please go to your Motherboard's web site and see if you can install the Realtek LAN Driver for Windows 10 V.10.001.0505.2015

    Also, Please make sure all Windows Updates are current and installed.
      My System SpecsSystem Spec


  10. Joined : Aug 2015
    Posts : 16
    Windows 10 Home
       16 Sep 2015 #20

    Here are the screenshots, and I ran the sfc /scannow​ and no integrity violations were found.
    Attachment 37892Attachment 37893Attachment 37894Attachment 37895Attachment 37896
      My System SpecsSystem Spec


 
Page 2 of 3 FirstFirst 123 LastLast


Similar Threads
Thread Forum
Solved System_service_exception (netio.sys)
Getting these blue screens in Win 10 Pro usually while streaming from online.tivo.com, which streams content locally from my Tivo Roamio OTA to Chrome. I don't know what is going on. Everything is updated. This is a multi boot PC with Win 8.1...
BSOD Crashes and Debugging
BSOD irql not less or equal
Upgraded Win 7 Pro Dell laptop to Win 10 Pro. Screen resolution changed on first win 10 boot and other resolutions greyed out. Windows update says unable to update Intel HD graphics drivers. Downloaded win 10 drivers from Intel site and...
BSOD Crashes and Debugging
BSOD Driver IRQL Not less or equal on Windows 10 Bootup
Hi, I am sorry, but I couldn't post a debug-YourComputerName-xxxx.zip file because I am currently unable to use my computer. But anyway, I originally posted this question on another answer website, and somebody started helping me and then...
BSOD Crashes and Debugging
BSOD IRQL less than or equal to error
HI, Since upgrading from 8.1 to 10 my PC often blue screens with the IRQL less than or equal to error. It appears to happen more often that not if i have sound playing at the time. I have upgraded all of my drivers to the latest ones and even on...
BSOD Crashes and Debugging
BSOD - No particular behaviour - IRQL-NOT_EQUAL_OR_LESS
Log Name: System Source: Microsoft-Windows-WER-SystemErrorReporting Date: 8/3/2015 12:59:19 AM Event ID: 1001 Task Category: None Level: Error Keywords: Classic User: N/A Computer: ...
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:57.
Find Us
Twitter Facebook Google+



Windows 10 Forums