Please help examining minidump-files

Page 1 of 2 12 LastLast

  1. Posts : 7

    Please help examining minidump-files


    Can anyone assist in examining these 4 minidump files? 4 BSOD's started happening in the last weeks. I try to figure out what could be the cause of the Stopcode: MEMORY_MANAGEMENT (at least today we made a picture of the BSOD. I don't know what the previous messages on screen were). Today we had 2 BSOD's (082421-6328-01.dmp and 082421-6656-01.dmp)

    The minidump files can be found here (I also putted the output in documents in that folder)

    Thanks a lot..!!
      My Computer

  2. Ztruker's Avatar
    Posts : 13,703
    Windows 10 Pro X64 21H1 19043.1266

    Please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions
      My Computers

  3. Posts : 7
    Thread Starter

    The output from the V2 Log collector can be found as an attachment.
    Attachment 344270

    Can someone please add this to my startpost? Thanks!
      My Computer

  4. Ztruker's Avatar
    Posts : 13,703
    Windows 10 Pro X64 21H1 19043.1266

    Last two dumps indicate a single bit memory failure:
        # Any other values for parameter 1 must be individually examined.
    Arg1: 0000000000041792, A corrupt PTE has been detected. Parameter 2 contains the address of
    	the PTE. Parameters 3/4 contain the low/high parts of the PTE.
    Arg2: ffffb43ffd355db0
    Arg3: 0000000000002000
    Arg4: 0000000000000000
    Up through DDR3, follow this tutorial: MemTest86+ - Test RAM - Windows 10 Forums
    DDR4, follow this tutorial: MemTest86 v8.1 Free Memory Testing Tool Review

    Both of these are diagnostic tools designed to test Random Access Memory (RAM) for faults. They will verify that:
    • RAM will accept and keep random patterns of data sent to it
    • There are no errors when different parts of memory try to interact
    • There are no conflicts between memory addresses

    They run from bootable media to isolate the RAM from the system, no other components are taken into account during the test.

    warning   Warning
    MemTest86+ and Memtest86 need to run for at least 8 passes to be anywhere near conclusive, anything less will not give a complete analysis of the RAM. The new version of Memtest86 only allows 4 passes for the free version so run it twice, back to back.

    If you are asked to run MemTest86+ or Memtest86 by a Ten Forums member make sure you run the full 8 (or 4+4) passes for conclusive results. If you run less than 8 passes you will be asked to run it again.

    Note   Note
    Both of these diagnostics has been known to discover errors in RAM in later passes than the eighth pass. This is for information only; if you feel there is a definite problem with the RAM and 8 passes have shown no errors feel free to continue for longer.

    Running 8 passes of MemTest86+ or 4+4 passes of Memtest86 is a long and drawn out exercise and the more RAM you have the longer it will take. It's recommended to run it overnight, starting just before you go to bed and leave it overnight.

    Take a picture when done and post in the forum please.
      My Computers

  5. Posts : 7
    Thread Starter

    Please help examining minidump-files-memtest1.jpg
      My Computer

  6. Posts : 39,156
    windows 10 professional version 1607 build 14393.969 64 bit

    Please run:
    Tuneup.bat - Click here to go to the BSOD batch repository to download and run this batch file.
      My Computer

  7. Posts : 7
    Thread Starter

    Memtest ran outside of the OS and detected errors.

    Why would I have to make OS adjustments with 'Tuneup.bat'? It runs SFC, DISM and CHKDSK commands and uses WMIC to change some settings in Windows.
      My Computer

  8. Posts : 39,156
    windows 10 professional version 1607 build 14393.969 64 bit

    It will check for additional computer problems and tune up the computer.

    I'm evaluating computer's with failed RAM and want to see if Windows had found malfunctioning RAM and whether it did or did not predict RAM failure.

    The currently installed RAM is mismatched.
      My Computer

  9. Posts : 7
    Thread Starter

    I will do my best, it's not my computer. Is this still valauble data for you after the RAM has been replaced?
      My Computer

  10. Posts : 39,156
    windows 10 professional version 1607 build 14393.969 64 bit

    After the RAM is replaced please run the DM log collector:
    BSOD - Posting Instructions

    If possible please use English as the default language before running the log collector so that the files can be scanned:
    Add, Remove, and Change Display Language in Windows 10
    Change Display Language in Windows 10
      My Computer

Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 02:36.
Find Us

Windows 10 Forums