Memory management


  1. Posts : 18
    Windows 10
       #1

    Memory management


    Hello,

    im get MEMORY MANAGEMENT BSOD again afer some time without problems.
    grateful for any assistance.
      My Computer


  2. Posts : 1,538
    Windows 8.1 Enterprise x64
       #2

    Test RAM with memtest86 - MemTest86+ - Test RAM
    Also connect the RAM to other slots, start the computer with only one RAM chip and check the efficiency of all RAM chips and replace the RAM with another one
      My Computer


  3. Posts : 18
    Windows 10
    Thread Starter
       #3

    MrPepka said:
    Test RAM with memtest86 - MemTest86+ - Test RAM
    Also connect the RAM to other slots, start the computer with only one RAM chip and check the efficiency of all RAM chips and replace the RAM with another one
    thanks, continuing to investigate
      My Computer


  4. Posts : 14,046
    Windows 11 Pro X64 22H2 22621.1848
       #4

    The last dump in the zip file is from 7/28. Are you continuing to get BSODs? If so run the V2 log collector again and upload the resulting zip file please.

    The 7/28 dump indicates memory corruption so testing the ram is definitely in order. memtest86 is the tool you need.
      My Computers


  5. Posts : 18
    Windows 10
    Thread Starter
       #5

    Ztruker said:
    The last dump in the zip file is from 7/28. Are you continuing to get BSODs? If so run the V2 log collector again and upload the resulting zip file please.

    The 7/28 dump indicates memory corruption so testing the ram is definitely in order. memtest86 is the tool you need.

    yes I had exact the same memory management BSOD yesterday 09,08 (attached the log)
    I used memtest86 since the memtest86+ won't boot from the usb-key no matter what I did.
    tried also the extended test of the windows tool. but after 24h it was stuck at 45% so I stopped it.

    thank you!
      My Computer


  6. Posts : 14,046
    Windows 11 Pro X64 22H2 22621.1848
       #6

    Did you run memtest86 twice, back to back to get 4+4 passes?

    Are you doing any system tweaking, voltage or speed including memory?

    Suggest setting everything to default and testing to see if that helps.
      My Computers


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 03:47.
Find Us




Windows 10 Forums