Windows 10: Windows 10 several BSODs at the same moment.

  1.    20 Aug 2015 #1

    Windows 10 several BSODs at the same moment.

    So after using Windows 10 for two days on my desktop, I suddenly go a BSOD with the error Memory Management. It then restarted my PC and every time I wanted to login it, which means I just typed my password and pressed Enter, it started to give me several BSODs including: Memory Management, Bad Pool Header, System Service Exception and something with Kernel Security Failure? This kept persisting and even sometimes happened in Safe Mode (I could log in in Safe Mode and use my desktop for a while).

    Now after rebooting in and out of Safe Mode several times, also rebooting in the normal boot way several times during that. I suddenly succeeded to log into Windows, but now Explorer.exe is all acting up with restarting on it's own and even freezing.

    Here are my logs and minidumps, I hope somebody can help me out with this.
      My ComputerSystem Spec

  2. essenbe's Avatar
    Posts : 11,358
    Windows 10 Pro and Windows 10 Pro Insider
       20 Aug 2015 #2

    Hello, Didifais. I have looked at several of your dump files and the errors seem to be all over the place. Several of them name Memory Management, and that is typically what happens with bad memory. So I would like to start there. This is what I found.

    MEMORY_MANAGEMENT (1a)    # Any other values for parameter 1 must be individually examined.
    Arg1: 0000000000041793, The subtype of the bugcheck.
    Arg2: fffff6801751a080
    Arg3: 0000000000000001
    Arg4: 0000000000000000
    Use !analyze -v to get detailed debugging information.
    BugCheck 19, {d, ffffc00045bc0000, b1c3721f30ee0151, b1c3721f30ee01f5}
    *** WARNING: Unable to verify timestamp for nvlddmkm.sys
    *** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
    Probably caused by : Pool_Corruption ( nt!ExFreePool+d98 )
    Followup: Pool_corruption
    Use !analyze -v to get detailed debugging information.
    BugCheck 3B, {c0000005, fffff8011bf17440, ffffd00022113a60, 0}
    Probably caused by : WdFilter.sys ( WdFilter!MpPreCleanup+150 )
    Followup: MachineOwner
    Please Run Memtest86+

    information   Information
    Please download from this site only in the middle of the page are the Download links, you can download the or the Auto USB Flash Drive
    Extract the Zip file. If you chose the ISO image, burn it to a CD using Windows Disk Image Burner or any Image burner you may have. If you downloaded the Auto USB installer, extract it, insert your USB 2.0 Flash Drive and take note of the drive letter. Run the installer, select the Flash Drive Letter, check the format box and press next. It will install memtest86+ to a flash drive. You can use either V4.20 or V5.01. Boot from your selected media. If you use V5.01 it will tell you to press certain buttons at the start, please press no buttons. The test will begin on it's own and continue to run until you stop it. It needs to run for 8 complete passes or until you receive an error. If you receive an error, stop the test. Even 1 error is a fail. Each pass tests a different part of the ram and each of the 10 tests in each pass tests something different. It takes a minimum of 8 passes to completely test the ram, more passes are better. It is quite a long test and will take several hours depending on how much ram you have. Due to the time length it is best to run overnight. If you have any questions, please do not hesitate to ask.

    Also, please uninstall GeForce Experience also and Next please right click on the start icon and select Command prompt administrator, give admin permissions and copy/paste this into the window that opens and press enter sfc /scannow . If you decide to type it in, please notice the space between the sfc and the /. We want it to say no integrity violations were found. If it says there where corrupt files that could not be repaired, please reboot and run it again. You may have to run it 3 times with reboots in between each time.
      My ComputersSystem Spec

  3.    20 Aug 2015 #3


    Could this all have to do with Samsung Magician's Rapid Mode? As it doesn't seem to support Windows 10 yet?

    Also, I cant seem to run that command in Safe Mode. And if my RAM would be damaged, why do the BOSD's occur when I boot the normal way and they don't occur in Safe Mode.
      My ComputerSystem Spec


Related Threads
Solved Multiple BSODs in Windows 10 in BSOD Crashes and Debugging
Hi All, I just registered in hope you can help me with my problem. Yesterday I upgraded from Windows 7 to Windows 10. In windows 7 I used to get BSODs about once a week. The really weird thing is that it was related to whenever I rebooted my...
Have installed Windows 10 Pro today, after rebooting I encountered a BSOD, the PC then rebooted itself and another BSOD occurred. This happened two more times and then I booted in safe mode. I have attached the mini dump files, I have not...
Hi all, first post here. Am trying to install build 10074 on a freshly formatted (no dual boot) 256GB SSD in my Dell XPS 12 via USB. I get through the installation, reboot, do the initial setup, provide my MS account, then get stuck. White...
I am trying to dual boot Windows 10 with my work laptop running Win 8.1. Every time I try to install it, I get to the settings portion of the install and I just choose "Express settings" and after that it says "Just a moment..." with a spinning...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 12:18.
Find Us