BSODing constantly - Error: DRIVER_OVERRAN_STACK_BUFFER  

How did it take 2 hour and BSOD immediately?

It ran for a couple hours and then I installed the graphics driver and it asked for a reboot to complete the installation and then after that it BSOD immediately. I just got another BSOD with the verifier off. V2 attached.

- - - Updated - - -

UPDATE:

I haven't been getting any BSODs today but while trying to play games my computer is freezing up where I have to reboot to get out of it. No new dump files though.

- - - Updated - - -

zbook said:

Memtest86 version 9
Two tests of four passes each = pass

For any BSOD:

a) run the V2 log collector to collect new log files

b) open file explorer> this PC > C: > in the right upper corner search for: C:\Windows\memory.dmp
> if the file size is < 1.5 GB then > save to the downloads folder > zip > post a separate share link into the thread using one drive, drop box, or google drive

Here's the link for the memory.dmp file. Wuld let me upload it even though it was less than a Gb in size. Weird.

MEMORY.zip - Google Drive

If WDV is restarted please follow the instructions in post #27.

How come the instructions in post #29 to add 5 customized tests was not followed?
Why were the prior 3 customized tests no longer selected?

If WDV is restarted you will want to make yourself available.
Yesterday I had waited 2 hours.
How come you were modifying drivers instead of working together on WDV results?
Why was the GPU driver modified even though it was not seen in the crash?

zbook said:

If WDV is restarted please follow the instructions in post #27.

How come the instructions in post #29 to add 5 customized tests was not followed?
Why were the prior 3 customized tests no longer selected?

If WDV is restarted you will want to make yourself available.
Yesterday I had waited 2 hours.
How come you were modifying drivers instead of working together on WDV results?
Why was the GPU driver modified even though it was not seen in the crash?

I apologize. For some reason I thought you only wanted these selected:

[ ] (0x00000001) Special pool
[ ] (0x00000002) Force IRQL checking
[ ] (0x00000008) Pool tracking
[ ] (0x00000020) Deadlock detection
[ ] (0x00000080) DMA checking

I update the graphics driver because my games were crashing but not the PC itself.
I went ahead and set up the WDV correctly and got a new BSOD. New V2 is attached. Let me know if you need me to run the verifier again.
I also keep running into this issue after I reboot to get out of the BSOD or it seems to happen every other time I reboot period. (screen shot attached). When I try to click on any of the choices nothing happens. Only by rebooting over again does it finally load the OS.

- - - Updated - - -

I just had the computer crash again while playing a game. No BSOD, just a crash that rebooted the PC. Its getting so frustrating. Would a Windows reload fix the issue? I'm almost to the point of doing that if it would actually eliminate the problems.

kered1010 said:

I update the graphics driver because my games were crashing but not the PC itself.

How often will you do this?

Is this fixing the problem?

zbook said:

How often will you do this?

Is this fixing the problem?

How often will I update the graphics driver? Its at the latest one but I usually update when they release. I previously downgraded it because I thought it would help but it didn't. Hard to tell if it has helped. I've gotten less crashes to the desktop but still experiencing freezes where I have to reboot.

- - - Updated - - -

Any clues on that last V2? Is there anything else I should apply on the WDV?

For WDV start with 3 customized tests and increase to 19 as per the prior instructions (post #27).
The goal is to produce frequent crashes using the tool.
So post a new V2 after each WDV crash.

How long have you been running WDV?

zbook said:

For WDV start with 3 customized tests and increase to 19 as per the prior instructions (post #27).
The goal is to produce frequent crashes using the tool.
So post a new V2 after each WDV crash.

Increase to 19? You mean choose the rest from the list? When I originally tried what the microsoft site (https://answers.microsoft.com/en-us/...3-c48669e4c983) said which was all of them except three I couldn't get the PC to boot. It was stuck in a loop. So what am I supposed to do? Randomly add one at a time until it boots up? On that last V2 I posted it was the original three in the ten forums plus the ones you wanted me to add.

[ ] (0x00000001) Special pool
[ ] (0x00000002) Force IRQL checking
[ ] (0x00000008) Pool tracking
[ ] (0x00000020) Deadlock detection
[ ] (0x00000080) DMA checking

I disabled the verifier awaiting further instructions.

I'll need to sign off at this time.
Other members may be able to provide help.