Random Memory_Management BSOD's

Page 4 of 4 FirstFirst ... 234

  1. Posts : 514
    Windows 10
       #31

    Leave no stone unturned, not many left to turn.
      My Computer


  2. Posts : 5,169
    64bit Win 10 Pro ver 21H2
       #32

    From the beginning of this thread the dump files that I have seen point to corruption of memory addresses. This can be either the RAM itself (but you have ruled that out by installing your friends RAM and getting the same errors, I think) or the virtual memory addresses which will be in the pagefile which is on your C:\ drive. The C: drive is the NVMe 500GB SSD.

    It is worth checking that there is no corruption on the C:drive with CHKDSK

    I would be suspecting a hardware fault as the explanation - it could be CPU or disk or motherboard - hardware faults are so difficult to pinpoint. Keep up the testing and persevere.

    If you post the latest logs I will take a look at them - after a clean install any anomalies should be easier to find.
      My Computers


  3. Posts : 19
    Windows 10
    Thread Starter
       #33

    jmatt said:
    Leave no stone unturned, not many left to turn.
    I will change the thermal paste, tomorrow. Right now I'm running OCCT, to stress test the computer, and check temperatures. First test I'm running is CPU only, and in 1 hour, the min was 34.88 ºC and max. 74.13 ºC. Now I'm gonna run the CPU+GPU stress test and check temperatures. Will update when done.

    philc43 said:
    From the beginning of this thread the dump files that I have seen point to corruption of memory addresses. This can be either the RAM itself (but you have ruled that out by installing your friends RAM and getting the same errors, I think) or the virtual memory addresses which will be in the pagefile which is on your C:\ drive. The C: drive is the NVMe 500GB SSD.

    It is worth checking that there is no corruption on the C:drive with CHKDSK

    I would be suspecting a hardware fault as the explanation - it could be CPU or disk or motherboard - hardware faults are so difficult to pinpoint. Keep up the testing and persevere.

    If you post the latest logs I will take a look at them - after a clean install any anomalies should be easier to find.
    Will run CHKDSK. This is a fresh install, only installed world of warcraft and sims 4 as games, drivers, razer software/drivers for mouse and keyboard, a two other programs I use for World of Warcraft addons management (Tukui Client and Curseforge) Will post farbar log after the CPU+GPU stress test.

    Thanks all!
      My Computer


  4. Posts : 5,169
    64bit Win 10 Pro ver 21H2
       #34

    Please also post the V2 log collector files: BSOD - Posting Instructions
      My Computers


  5. Posts : 19
    Windows 10
    Thread Starter
       #35

    Ok. CPU+GPU stress test from OCCT runned fine for 1 hour, CPU temp avg 62-64 ºC, and GPU temperature min 34 ºC and max. 80 ºC. From what I've read from nvidia forums, this is normal temperatures for an GTX 970.

    Now, after the CPU+GPU stress test, I restarted the computer, and I'm getting a lot of MEMORY_MANAGEMENT BSOD's, and one SYSTEM_THREAD_EXCEPTION_NOT_HANDLED. Again, this happen right after the windows login, or if I leave it on the login screen (without putting the pin).

    I'm unable to get the logs, right now, because I cant do anything before it crashes. Will keep trying (it eventualy boots up fine after some tries) and post farbar, v2 logs, and WhoCrashed.
      My Computer


  6. Posts : 41,472
    windows 10 professional version 1607 build 14393.969 64 bit
       #36

    The BSOD 3rd party software reported Nvidia GPU drivers nvlddmkm.sys.
    The logs reported recurrent drive file system problems.

    Had you used DDU to replace the GPU drivers?
    Were the drives tested?

    Please place the computer into safe mode (shift + restart) and run:
    Boot into Safe Mode on Windows 10


    DiskParInfo.bat - Click here to go to the BSOD batch repository to download and run this batch file.

    Tuneup.bat - Click here to go to the BSOD batch repository to download and run this batch file.





    Run HD Sentinel: (free or trial edition)
    Hard Disk Sentinel - HDD health and temperature monitoring
    Hard Disk Sentinel - HDD health and temperature monitoring
    For each drive post images of these tabs into the thread:
    Overview tab
    Temperature
    SMART
    Disk performance

    Take Screenshot in Windows 10 Windows 10 General Tips Tutorials
    Take Screenshot in Windows 10



    Open administrative command prompt and type or copy and paste:
    chkdsk /b /v
    This may take hours to run so plan to run overnight.
    Run on all drives using the syntax: chkdsk /b /v C: or chkdsk /b /v D: changing the drive letter to the applicable drive.

    C:\Windows\system32>chkdsk /b /v
    The type of the file system is NTFS.
    Cannot lock current drive.

    Chkdsk cannot run because the volume is in use by another
    process. Would you like to schedule this volume to be
    checked the next time the system restarts? (Y/N)

    Type: Y
    reboot


    Use the information in this link to find the chkdsk report in the event viewer.
    Copy and paste into notepad > save to desktop > post into the thread using a one drive, drop box, or google drive share link:
    Read Chkdsk Log in Event Viewer in Windows 10 Windows 10 Performance Maintenance Tutorials
    Read Chkdsk Log in Event Viewer in Windows 10
      My Computer


  7. Posts : 19
    Windows 10
    Thread Starter
       #37

    Don't know what you mean by "Had you used DDU to replace the GPU drivers?" - I've just downloaded GeForce Experience, and downloaded the latest drivers.

    Here's the farbar and V2 logs:

    Farbar: Free file sharing without registration and size limits
    V2: Free file sharing without registration and size limits

    Will do the steps you mentioned in your last post, and post results in a couple of minutes.
      My Computer


  8. Posts : 41,472
    windows 10 professional version 1607 build 14393.969 64 bit
       #38

    1) uninstall the Nvidia GPU driver using DDU (display driver uninstaller)
    2) re-install the Nvidia GPU driver from the Nvidia website
    3) make sure that you check the clean install box and if available install the physx driver.

    Display Driver Uninstaller Download version 18.0.3.7 (or newer version if available)
    Official Display Driver Uninstaller DDU Download

    Display Driver Uninstaller: How to use - Windows 7 Help Forums
    Display Driver Uninstaller: How to use - Windows 7 Help Forums

    Download Drivers | NVIDIA
    Download Drivers | NVIDIA



    4) Run Memtest86 version 8.4 (or newer version if available) for four passes.
    Repeat the test so that eight passes are performed.

    MemTest86 - Official Site of the x86 and ARM Memory Testing Tool

    Use a camera or smart phone camera to take pictures and post images into the thread.
    In case there are any problems uploading images use share links (one drive, drop box, or google drive)

    Memtest86 has a feature to produce a text report.
    Please post this in addition to the images.


    5) Run:
    Free Virus Scan | Online Virus Scan from ESET | ESET
    Post images/text reports.



    Code:
    Name	NVIDIA GeForce GTX 970
    PNP Device ID	PCI\VEN_10DE&DEV_13C2&SUBSYS_31601462&REV_A1\4&EBB8677&0&0019
    Adapter Type	GeForce GTX 970, NVIDIA compatible
    Adapter Description	NVIDIA GeForce GTX 970
    Adapter RAM	(1,048,576) bytes
    Installed Drivers	C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_272b5c540127d6d2\nvldumdx.dll,C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_272b5c540127d6d2\nvldumdx.dll,C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_272b5c540127d6d2\nvldumdx.dll,C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_272b5c540127d6d2\nvldumdx.dll
    Driver Version	27.21.14.6172
    INF File	oem90.inf (Section032 section)
    Color Planes	Not Available
    Color Table Entries	4294967296
    Resolution	1920 x 1080 x 60 hertz
    Bits/Pixel	32
    Memory Address	0xFB000000-0xFC0FFFFF
    Memory Address	0xD0000000-0xE1FFFFFF
    Memory Address	0xE0000000-0xE1FFFFFF
    I/O Port	0x0000E000-0x0000EFFF
    IRQ Channel	IRQ 54
    Driver	C:\WINDOWS\SYSTEM32\DRIVERSTORE\FILEREPOSITORY\NV_DISPI.INF_AMD64_272B5C540127D6D2\NVLDDMKM.SYS (27.21.14.6172, 37.37 MB (39,183,640 bytes), 3/10/2021 4:37 PM)


    Code:
    3/12/2021 9:01 AM	Windows Error Reporting	Fault bucket 0x1E_c0000005_R_nvlddmkm!seqScriptRunScript, type 0
    Event Name: BlueScreen
    Response: Not available
    Cab Id: f515058c-2838-4226-ad86-806958461ac1
    
    Problem signature:
    P1: 1e
    P2: ffffffffc0000005
    P3: fffff805862d83d5
    P4: 0
    P5: ffffffffffffffff
    P6: 10_0_19042
    P7: 0_0
    P8: 256_1
    P9: 
    P10: 
    
    Attached files:
    \\?\C:\Windows\Minidump\031121-6156-01.dmp
    \\?\C:\Windows\TEMP\WER-12140-0.sysdata.xml
    \\?\C:\Windows\MEMORY.DMP
    \\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER3BE0.tmp.WERInternalMetadata.xml
    \\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER3BF0.tmp.xml
    \\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER3BFF.tmp.csv
    \\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER3C10.tmp.txt
    \\?\C:\Windows\Temp\WER7BB1.tmp.WERDataCollectionStatus.txt
    
    These files may be available here:
    \\?\C:\ProgramData\Microsoft\Windows\WER\ReportArchive\Kernel_1e_aad6446bf1e1eae1ed57bf43a8976393a1c55bc_00000000_cab_0f1da5b2-f548-4ce5-adbd-09a5eb9e8a65
    
    Analysis symbol: 
    Rechecking for solution: 0
    Report Id: a174d65d-8357-427f-a91c-faa7c88873e1
    Report Status: 268435460
    Hashed bucket: 
    Cab Guid: 0
    Code:
    nvlddmkm.sys Tue Feb 23 15:51:02 2021 (603578C6)
      My Computer


  9. Posts : 19
    Windows 10
    Thread Starter
       #39

    DiskParInfo
    Code:
        Disk 0 : SSD. It has 1 partition(s). Model: CT250BX100SSD1    
        Disk 1 : SATA. It has 3 partition(s). Model: WDC WD10EARS-22Y5B1   
        Disk 2 : SSD. It has 4 partition(s). Model: PNY CS3030 500GB SSD 
    
        The script has found the above 3 storage device(s) in total.
    =======================================================================
    
    Microsoft DiskPart version 10.0.19041.610
    
    Copyright (C) Microsoft Corporation.
    On computer: DESKTOP-TQ4HAIL
    
      Disk ###  Status         Size     Free     Dyn  Gpt
      --------  -------------  -------  -------  ---  ---
      Disk 0    Online          232 GB      0 B        *
      Disk 1    Online          931 GB  1024 KB         
      Disk 2    Online          465 GB  1024 KB        *
    
      Volume ###  Ltr  Label        Fs     Type        Size     Status     Info
      ----------  ---  -----------  -----  ----------  -------  ---------  --------
      Volume 0     D   Backup       NTFS   Partition    232 GB  Healthy            
      Volume 1     E   Armaz‚m A    NTFS   Partition    299 GB  Healthy            
      Volume 2     G   Armaz‚m B    NTFS   Partition    315 GB  Healthy            
      Volume 3     H   Armaz‚m C    NTFS   Partition    315 GB  Healthy            
      Volume 4     C                NTFS   Partition    465 GB  Healthy    Boot    
      Volume 5                      FAT32  Partition    100 MB  Healthy    System  
      Volume 6                      NTFS   Partition    499 MB  Healthy    Hidden  
    
    Disk 0 is now the selected disk.
    
    CT250BX100SSD1
    Disk ID: {D033322E-7C0B-4890-B3F5-19FA1170A78E}
    Type   : SATA
    Status : Online
    Path   : 0
    Target : 0
    LUN ID : 0
    Location Path : PCIROOT(0)#PCI(0102)#PCI(0001)#ATA(C00T00L00)
    Current Read-only State : No
    Read-only  : No
    Boot Disk  : No
    Pagefile Disk  : No
    Hibernation File Disk  : No
    Crashdump Disk  : No
    Clustered Disk  : No
    
      Volume ###  Ltr  Label        Fs     Type        Size     Status     Info
      ----------  ---  -----------  -----  ----------  -------  ---------  --------
      Volume 0     D   Backup       NTFS   Partition    232 GB  Healthy            
    
      Partition ###  Type              Size     Offset
      -------------  ----------------  -------  -------
      Partition 1    Primary            232 GB  1024 KB
    
    Partition 1 is now the selected partition.
    
    Partition 1
    Type    : ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
    Hidden  : No
    Required: No
    Attrib  : 0000000000000000
    Offset in Bytes: 1048576
    
      Volume ###  Ltr  Label        Fs     Type        Size     Status     Info
      ----------  ---  -----------  -----  ----------  -------  ---------  --------
    * Volume 0     D   Backup       NTFS   Partition    232 GB  Healthy            
    
    Disk 1 is now the selected disk.
    
    WDC WD10EARS-22Y5B1
    Disk ID: 34653464
    Type   : SATA
    Status : Online
    Path   : 1
    Target : 0
    LUN ID : 0
    Location Path : PCIROOT(0)#PCI(0102)#PCI(0001)#ATA(C01T00L00)
    Current Read-only State : No
    Read-only  : No
    Boot Disk  : No
    Pagefile Disk  : No
    Hibernation File Disk  : No
    Crashdump Disk  : No
    Clustered Disk  : No
    
      Volume ###  Ltr  Label        Fs     Type        Size     Status     Info
      ----------  ---  -----------  -----  ----------  -------  ---------  --------
      Volume 1     E   Armaz‚m A    NTFS   Partition    299 GB  Healthy            
      Volume 2     G   Armaz‚m B    NTFS   Partition    315 GB  Healthy            
      Volume 3     H   Armaz‚m C    NTFS   Partition    315 GB  Healthy            
    
      Partition ###  Type              Size     Offset
      -------------  ----------------  -------  -------
      Partition 1    Primary            299 GB  1024 KB
      Partition 2    Primary            315 GB   299 GB
      Partition 3    Primary            315 GB   615 GB
    
    Partition 1 is now the selected partition.
    
    Partition 1
    Type  : 07
    Hidden: No
    Active: Yes
    Offset in Bytes: 1048576
    
      Volume ###  Ltr  Label        Fs     Type        Size     Status     Info
      ----------  ---  -----------  -----  ----------  -------  ---------  --------
    * Volume 1     E   Armaz‚m A    NTFS   Partition    299 GB  Healthy            
    
    Partition 2 is now the selected partition.
    
    Partition 2
    Type  : 07
    Hidden: No
    Active: No
    Offset in Bytes: 322119401472
    
      Volume ###  Ltr  Label        Fs     Type        Size     Status     Info
      ----------  ---  -----------  -----  ----------  -------  ---------  --------
    * Volume 2     G   Armaz‚m B    NTFS   Partition    315 GB  Healthy            
    
    Partition 3 is now the selected partition.
    
    Partition 3
    Type  : 07
    Hidden: No
    Active: No
    Offset in Bytes: 661160722432
    
      Volume ###  Ltr  Label        Fs     Type        Size     Status     Info
      ----------  ---  -----------  -----  ----------  -------  ---------  --------
    * Volume 3     H   Armaz‚m C    NTFS   Partition    315 GB  Healthy            
    
    Disk 2 is now the selected disk.
    
    PNY CS3030 500GB SSD
    Disk ID: {33425BCB-0A75-40CF-92C5-CBF6B6D63DE7}
    Type   : NVMe
    Status : Online
    Path   : 0
    Target : 0
    LUN ID : 0
    Location Path : PCIROOT(0)#PCI(0101)#PCI(0000)#NVME(P00T00L00)
    Current Read-only State : No
    Read-only  : No
    Boot Disk  : Yes
    Pagefile Disk  : Yes
    Hibernation File Disk  : No
    Crashdump Disk  : Yes
    Clustered Disk  : No
    
      Volume ###  Ltr  Label        Fs     Type        Size     Status     Info
      ----------  ---  -----------  -----  ----------  -------  ---------  --------
      Volume 4     C                NTFS   Partition    465 GB  Healthy    Boot    
      Volume 5                      FAT32  Partition    100 MB  Healthy    System  
      Volume 6                      NTFS   Partition    499 MB  Healthy    Hidden  
    
      Partition ###  Type              Size     Offset
      -------------  ----------------  -------  -------
      Partition 1    System             100 MB  1024 KB
      Partition 2    Reserved            16 MB   101 MB
      Partition 3    Primary            465 GB   117 MB
      Partition 4    Recovery           499 MB   465 GB
    
    Partition 1 is now the selected partition.
    
    Partition 1
    Type    : c12a7328-f81f-11d2-ba4b-00a0c93ec93b
    Hidden  : Yes
    Required: No
    Attrib  : 0X8000000000000000
    Offset in Bytes: 1048576
    
      Volume ###  Ltr  Label        Fs     Type        Size     Status     Info
      ----------  ---  -----------  -----  ----------  -------  ---------  --------
    * Volume 5                      FAT32  Partition    100 MB  Healthy    System  
    
    Partition 2 is now the selected partition.
    
    Partition 2
    Type    : e3c9e316-0b5c-4db8-817d-f92df00215ae
    Hidden  : Yes
    Required: No
    Attrib  : 0X8000000000000000
    Offset in Bytes: 105906176
    
    There is no volume associated with this partition.
    
    Partition 3 is now the selected partition.
    
    Partition 3
    Type    : ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
    Hidden  : No
    Required: No
    Attrib  : 0000000000000000
    Offset in Bytes: 122683392
    
      Volume ###  Ltr  Label        Fs     Type        Size     Status     Info
      ----------  ---  -----------  -----  ----------  -------  ---------  --------
    * Volume 4     C                NTFS   Partition    465 GB  Healthy    Boot    
    
    Partition 4 is now the selected partition.
    
    Partition 4
    Type    : de94bba4-06d1-4d40-a16a-bfd50179d6ac
    Hidden  : Yes
    Required: Yes
    Attrib  : 0X8000000000000001
    Offset in Bytes: 499583549440
    
      Volume ###  Ltr  Label        Fs     Type        Size     Status     Info
      ----------  ---  -----------  -----  ----------  -------  ---------  --------
    * Volume 6                      NTFS   Partition    499 MB  Healthy    Hidden  
    
    ===============================================================================
    
    Windows Recovery Environment (Windows RE) and system reset configuration
    Information:
    
        Windows RE status:         Enabled
        Windows RE location:       \\?\GLOBALROOT\device\harddisk2\partition4\Recovery\WindowsRE
        Boot Configuration Data (BCD) identifier: 2bb22e4e-81f8-11eb-b842-e6c404600e0b
        Recovery image location:   
        Recovery image index:      0
        Custom image location:     
        Custom image index:        0
    
    REAGENTC.EXE: Operation Successful.
        
    ===============================================================================
    
    Firmware Boot Manager
    ---------------------
    identifier              {fwbootmgr}
    displayorder            {bootmgr}
    timeout                 1
    
    Windows Boot Manager
    --------------------
    identifier              {bootmgr}
    device                  partition=\Device\HarddiskVolume1
    path                    \EFI\MICROSOFT\BOOT\BOOTMGFW.EFI
    description             Windows Boot Manager
    locale                  en-US
    inherit                 {globalsettings}
    default                 {current}
    resumeobject            {2bb22e4c-81f8-11eb-b842-e6c404600e0b}
    displayorder            {current}
    toolsdisplayorder       {memdiag}
    timeout                 30
    
    Windows Boot Loader
    -------------------
    identifier              {current}
    device                  partition=C:
    path                    \Windows\system32\winload.efi
    description             Windows 10
    locale                  en-US
    inherit                 {bootloadersettings}
    recoverysequence        {2bb22e4e-81f8-11eb-b842-e6c404600e0b}
    displaymessageoverride  Recovery
    recoveryenabled         Yes
    isolatedcontext         Yes
    allowedinmemorysettings 0x15000075
    osdevice                partition=C:
    systemroot              \Windows
    resumeobject            {2bb22e4c-81f8-11eb-b842-e6c404600e0b}
    nx                      OptIn
    bootmenupolicy          Standard
    
    Windows Boot Loader
    -------------------
    identifier              {2bb22e4e-81f8-11eb-b842-e6c404600e0b}
    device                  ramdisk=[\Device\HarddiskVolume4]\Recovery\WindowsRE\Winre.wim,{2bb22e4f-81f8-11eb-b842-e6c404600e0b}
    path                    \windows\system32\winload.efi
    description             Windows Recovery Environment
    locale                  en-us
    inherit                 {bootloadersettings}
    displaymessage          Recovery
    osdevice                ramdisk=[\Device\HarddiskVolume4]\Recovery\WindowsRE\Winre.wim,{2bb22e4f-81f8-11eb-b842-e6c404600e0b}
    systemroot              \windows
    nx                      OptIn
    bootmenupolicy          Standard
    winpe                   Yes
    
    Resume from Hibernate
    ---------------------
    identifier              {2bb22e4c-81f8-11eb-b842-e6c404600e0b}
    device                  partition=C:
    path                    \Windows\system32\winresume.efi
    description             Windows Resume Application
    locale                  en-US
    inherit                 {resumeloadersettings}
    recoverysequence        {2bb22e4e-81f8-11eb-b842-e6c404600e0b}
    recoveryenabled         Yes
    isolatedcontext         Yes
    allowedinmemorysettings 0x15000075
    filedevice              partition=C:
    filepath                \hiberfil.sys
    bootmenupolicy          Standard
    debugoptionenabled      No
    
    Windows Memory Tester
    ---------------------
    identifier              {memdiag}
    device                  partition=\Device\HarddiskVolume1
    path                    \EFI\Microsoft\Boot\memtest.efi
    description             Windows Memory Diagnostic
    locale                  en-US
    inherit                 {globalsettings}
    badmemoryaccess         Yes
    
    EMS Settings
    ------------
    identifier              {emssettings}
    bootems                 No
    
    Debugger Settings
    -----------------
    identifier              {dbgsettings}
    debugtype               Local
    
    RAM Defects
    -----------
    identifier              {badmemory}
    
    Global Settings
    ---------------
    identifier              {globalsettings}
    inherit                 {dbgsettings}
                            {emssettings}
                            {badmemory}
    
    Boot Loader Settings
    --------------------
    identifier              {bootloadersettings}
    inherit                 {globalsettings}
                            {hypervisorsettings}
    
    Hypervisor Settings
    -------------------
    identifier              {hypervisorsettings}
    hypervisordebugtype     Serial
    hypervisordebugport     1
    hypervisorbaudrate      115200
    
    Resume Loader Settings
    ----------------------
    identifier              {resumeloadersettings}
    inherit                 {globalsettings}
    
    Device options
    --------------
    identifier              {2bb22e4f-81f8-11eb-b842-e6c404600e0b}
    description             Windows Recovery
    ramdisksdidevice        partition=\Device\HarddiskVolume4
    ramdisksdipath          \Recovery\WindowsRE\boot.sdi
    Tuneup
    Code:
    ###########################################################
    # The following commands will be run in sequence.         #
    # The first 5 will take quite a while to run, be patient. #
    ###########################################################
    
    sfc /scannow
    dism /online /cleanup-image /scanhealth
    dism /online /cleanup-image /restorehealth
    sfc /scannow
    
    chkdsk /scan
    
    wmic recoveros get autoreboot
    wmic recoveros set autoreboot = false
    wmic recoveros get autoreboot
    wmic recoveros get DebugInfoType
    wmic recoveros set DebugInfoType = 7
    wmic recoveros get DebugInfoType
    
    wmic pagefile list /format:list
    wmic Computersystem where name="DESKTOP-TQ4HAIL" get AutomaticManagedPagefile
    wmic Computersystem where name="DESKTOP-TQ4HAIL" set AutomaticManagedPagefile=True
    wmic Computersystem where name="DESKTOP-TQ4HAIL" get AutomaticManagedPagefile
    
    bcdedit /enum {badmemory}
    
    
    C:\Windows\system32>sfc /scannow
    
    Beginning system scan.  This process will take some time.
    
    Beginning verification phase of system scan.
    Verification 100% complete.
    
    Windows Resource Protection found corrupt files and successfully repaired them.
    For online repairs, details are included in the CBS log file located at
    windir\Logs\CBS\CBS.log. For example C:\Windows\Logs\CBS\CBS.log. For offline
    repairs, details are included in the log file provided by the /OFFLOGFILE flag.
    
    C:\Windows\system32>dism /online /cleanup-image /scanhealth
    
    Deployment Image Servicing and Management tool
    Version: 10.0.19041.844
    
    Image Version: 10.0.19042.867
    
    [==========================100.0%==========================] No component store corruption detected.
    The operation completed successfully.
    
    C:\Windows\system32>dism /online /cleanup-image /restorehealth
    
    Deployment Image Servicing and Management tool
    Version: 10.0.19041.844
    
    Image Version: 10.0.19042.867
    
    [==========================100.0%==========================] The restore operation completed successfully.
    The operation completed successfully.
    
    C:\Windows\system32>sfc /scannow
    
    Beginning system scan.  This process will take some time.
    
    Beginning verification phase of system scan.
    Verification 100% complete.
    
    Windows Resource Protection did not find any integrity violations.
    
    C:\Windows\system32>chkdsk /scan
    The type of the file system is NTFS.
    
    Stage 1: Examining basic file system structure ...
      290048 file records processed.
    File verification completed.
     Phase duration (File record verification): 1.95 seconds.
      7349 large file records processed.
     Phase duration (Orphan file record recovery): 0.00 milliseconds.
      0 bad file records processed.
     Phase duration (Bad file record checking): 0.90 milliseconds.
    
    Stage 2: Examining file name linkage ...
      16141 reparse records processed.
      427362 index entries processed.
    Index verification completed.
     Phase duration (Index verification): 6.05 seconds.
      0 unindexed files scanned.
     Phase duration (Orphan reconnection): 181.26 milliseconds.
      0 unindexed files recovered to lost and found.
     Phase duration (Orphan recovery to lost and found): 0.90 milliseconds.
      16141 reparse records processed.
     Phase duration (Reparse point and Object ID verification): 27.72 milliseconds.
    
    Stage 3: Examining security descriptors ...
    Security descriptor verification completed.
     Phase duration (Security descriptor verification): 51.09 milliseconds.
      68658 data files processed.
     Phase duration (Data attribute verification): 0.31 milliseconds.
    CHKDSK is verifying Usn Journal...
      41658168 USN bytes processed.
    Usn Journal verification completed.
     Phase duration (USN journal verification): 128.11 milliseconds.
    
    Windows has scanned the file system and found no problems.
    No further action is required.
    
     487754091 KB total disk space.
     175235392 KB in 213768 files.
        142344 KB in 68659 indexes.
             0 KB in bad sectors.
        414891 KB in use by the system.
         65536 KB occupied by the log file.
     311961464 KB available on disk.
    
          4096 bytes in each allocation unit.
     121938522 total allocation units on disk.
      77990366 allocation units available on disk.
    Total duration: 8.40 seconds (8408 ms).
    
    C:\Windows\system32>wmic recoveros get autoreboot
    AutoReboot
    TRUE
    
    
    C:\Windows\system32>wmic recoveros set autoreboot = false
    Updating property(s) of '\\DESKTOP-TQ4HAIL\ROOT\CIMV2:Win32_OSRecoveryConfiguration.Name="Microsoft Windows 10 Pro|C:\\Windows|\\Device\\Harddisk2\\Partition3"'
    Property(s) update successful.
    
    C:\Windows\system32>wmic recoveros get autoreboot
    AutoReboot
    FALSE
    
    
    C:\Windows\system32>wmic recoveros get DebugInfoType
    DebugInfoType
    7
    
    
    C:\Windows\system32>wmic recoveros set DebugInfoType = 7
    Updating property(s) of '\\DESKTOP-TQ4HAIL\ROOT\CIMV2:Win32_OSRecoveryConfiguration.Name="Microsoft Windows 10 Pro|C:\\Windows|\\Device\\Harddisk2\\Partition3"'
    Property(s) update successful.
    
    C:\Windows\system32>wmic recoveros get DebugInfoType
    DebugInfoType
    7
    
    
    C:\Windows\system32>wmic pagefile list /format:list
    
    
    AllocatedBaseSize=2944
    CurrentUsage=0
    Description=C:\pagefile.sys
    InstallDate=20210310152918.639482+000
    Name=C:\pagefile.sys
    PeakUsage=1
    Status=
    TempPageFile=FALSE
    
    
    
    
    C:\Windows\system32>wmic Computersystem where name="DESKTOP-TQ4HAIL" get AutomaticManagedPagefile
    AutomaticManagedPagefile
    TRUE
    
    
    C:\Windows\system32>wmic Computersystem where name="DESKTOP-TQ4HAIL" set AutomaticManagedPagefile=True
    Updating property(s) of '\\DESKTOP-TQ4HAIL\ROOT\CIMV2:Win32_ComputerSystem.Name="DESKTOP-TQ4HAIL"'
    Property(s) update successful.
    
    C:\Windows\system32>wmic Computersystem where name="DESKTOP-TQ4HAIL" get AutomaticManagedPagefile
    AutomaticManagedPagefile
    TRUE
    
    
    C:\Windows\system32>bcdedit /enum {badmemory}
    
    RAM Defects
    -----------
    identifier              {badmemory}
    
    C:\Windows\system32>Echo off
       ###################################################################################
       #    How to capture batch file data and post in your thread in the BSOD forum     #
       #                                                                                 #
       #      Batch files and instructions for use in BSOD debugging[Part Two-Four]      #
       #                                                                                 #
       #        Press [V] to visit the above web page for detailed instructions.         #
       #        Press [C] to close this window.                                          #
       ###################################################################################


    Hard Disk Sentinel Screenshots (ziped): Free file sharing without registration and size limits

    Will do Chkdsk now, then the other steps remaining :)

    - - - Updated - - -

    CHKDSK
    Code:
    Chkdsk was executed in scan mode on a volume snapshot.  
    
    Checking file system on C:
    The type of the file system is NTFS.
    
    Stage 1: Examining basic file system structure ...
      290048 file records processed.                                                         File verification completed.
     Phase duration (File record verification): 1.95 seconds.
      7349 large file records processed.                                     Phase duration (Orphan file record recovery): 0.00 milliseconds.
      0 bad file records processed.                                       Phase duration (Bad file record checking): 0.90 milliseconds.
    
    Stage 2: Examining file name linkage ...
      16141 reparse records processed.                                         427362 index entries processed.                                                        Index verification completed.
     Phase duration (Index verification): 6.05 seconds.
      0 unindexed files scanned.                                          Phase duration (Orphan reconnection): 181.26 milliseconds.
      0 unindexed files recovered to lost and found.                      Phase duration (Orphan recovery to lost and found): 0.90 milliseconds.
      16141 reparse records processed.                                        Phase duration (Reparse point and Object ID verification): 27.72 milliseconds.
    
    Stage 3: Examining security descriptors ...
    Security descriptor verification completed.
     Phase duration (Security descriptor verification): 51.09 milliseconds.
      68658 data files processed.                                             Phase duration (Data attribute verification): 0.31 milliseconds.
    CHKDSK is verifying Usn Journal...
      41658168 USN bytes processed.                                                            Usn Journal verification completed.
     Phase duration (USN journal verification): 128.11 milliseconds.
    
    Windows has scanned the file system and found no problems.
    No further action is required.
    
     487754091 KB total disk space.
     175235392 KB in 213768 files.
        142344 KB in 68659 indexes.
             0 KB in bad sectors.
        414891 KB in use by the system.
         65536 KB occupied by the log file.
     311961464 KB available on disk.
    
          4096 bytes in each allocation unit.
     121938522 total allocation units on disk.
      77990366 allocation units available on disk.
    Total duration: 8.40 seconds (8408 ms).
    
    ----------------------------------------------------------------------
    
    
    Stage 1: Examining basic file system structure ...
    
    Stage 2: Examining file name linkage ...
    
    Stage 3: Examining security descriptors ...
    WININIT
    Code:
    Checking file system on C:
    The type of the file system is NTFS.
    
    A disk check has been scheduled.
    Windows will now check the disk.                         
    
    Stage 1: Examining basic file system structure ...
      290304 file records processed.                                                         
    File verification completed.
     Phase duration (File record verification): 1.51 seconds.
      7352 large file records processed.                                    
     Phase duration (Orphan file record recovery): 0.00 milliseconds.
      0 bad file records processed.                                      
     Phase duration (Bad file record checking): 1.30 milliseconds.
    
    Stage 2: Examining file name linkage ...
      16156 reparse records processed.                                       
      427684 index entries processed.                                                        
    Index verification completed.
     Phase duration (Index verification): 5.71 seconds.
      0 unindexed files scanned.                                         
     Phase duration (Orphan reconnection): 176.25 milliseconds.
      0 unindexed files recovered to lost and found.                     
     Phase duration (Orphan recovery to lost and found): 266.81 milliseconds.
      16156 reparse records processed.                                       
     Phase duration (Reparse point and Object ID verification): 25.40 milliseconds.
    
    Stage 3: Examining security descriptors ...
    Cleaning up 1057 unused index entries from index $SII of file 0x9.
    Cleaning up 1057 unused index entries from index $SDH of file 0x9.
    Cleaning up 1057 unused security descriptors.
    Security descriptor verification completed.
     Phase duration (Security descriptor verification): 47.88 milliseconds.
      68691 data files processed.                                            
     Phase duration (Data attribute verification): 1.34 milliseconds.
    CHKDSK is verifying Usn Journal...
      34771032 USN bytes processed.                                                            
    Usn Journal verification completed.
     Phase duration (USN journal verification): 102.87 milliseconds.
    
    Stage 4: Looking for bad clusters in user file data ...
      290288 files processed.                                                                
    File data verification completed.
     Phase duration (User file recovery): 2.74 minutes.
    
    Stage 5: Looking for bad, free clusters ...
      78455468 free clusters processed.                                                        
    Free space verification is complete.
     Phase duration (Free space recovery): 0.00 milliseconds.
    
    Windows has scanned the file system and found no problems.
    No further action is required.
    
     487754091 KB total disk space.
     173381292 KB in 214094 files.
        142436 KB in 68692 indexes.
             0 KB in bad sectors.
        408487 KB in use by the system.
         65536 KB occupied by the log file.
     313821876 KB available on disk.
    
          4096 bytes in each allocation unit.
     121938522 total allocation units on disk.
      78455469 allocation units available on disk.
    Total duration: 2.87 minutes (172423 ms).
    
    Internal Info:
    00 6e 04 00 ac 50 04 00 f7 f2 07 00 00 00 00 00  .n...P..........
    c0 00 00 00 5c 3e 00 00 00 00 00 00 00 00 00 00  ....\>..........
    
    Windows has finished checking your disk.
    Please wait while your computer restarts.

    Uninstalled nvidia drivers with DDU, and reinstalled the downloaded ones from nvidia website, with clean install and physics. Will run memtest86, will post results, today, if I can, or tomorrow. :)
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 15:19.
Find Us




Windows 10 Forums