New
#1
Intermittent BSOD - IRQL, PAGE_FAULT, etc
Hello,
Win 10, 20H2 build 19042.662
I am experiencing a BSOD that appears after a few hours of system up time. It varies what the errors are. I have tried out Memtest86, with both sticks installed, and separately. There were no issues reported.
Just to make sure it wasn't a PSU issue I ordered a PSU and swapped it out, still have the error.
Currently I am running a selective startup, with non-microsoft services disabled. BIOS is up-to-date. I have installed all drivers from the manufacturers website, and chipset drivers, and they are all up to date.
Interestingly, my system was stable with 1 ram stick, with selective startup. It crashes with normal startup, 1 stick. With 2 ram sticks installed, it crashes with selective startup. Nothing seems conclusive at this point, and I believe it is a hardware issue. CPU, RAM, or MOBO? Maybe GPU? I have a CPU RMA from AMD ready to go, so I might just go that route.
Perhaps it is the NVME?
Edit: I did reinstall Win10, and got a crash about 5 minutes into the fresh install.
I have attached the V2 log. Thanks.
- - - Updated - - -
Ran tuneup.bat, here is the output. Looks normal.
- - - Updated - - -Code:########################################################### # The following commands will be run in sequence. # # The first 5 will take quite a while to run, be patient. # ########################################################### sfc /scannow dism /online /cleanup-image /scanhealth dism /online /cleanup-image /restorehealth sfc /scannow chkdsk /scan wmic recoveros get autoreboot wmic recoveros set autoreboot = false wmic recoveros get autoreboot wmic recoveros get DebugInfoType wmic recoveros set DebugInfoType = 7 wmic recoveros get DebugInfoType wmic pagefile list /format:list wmic Computersystem where name="REAC-5" get AutomaticManagedPagefile wmic Computersystem where name="REAC-5" set AutomaticManagedPagefile=True wmic Computersystem where name="REAC-5" get AutomaticManagedPagefile bcdedit /enum {badmemory} C:\Windows\system32>sfc /scannow Beginning system scan. This process will take some time. Beginning verification phase of system scan. Verification 100% complete. Windows Resource Protection did not find any integrity violations. C:\Windows\system32>dism /online /cleanup-image /scanhealth Deployment Image Servicing and Management tool Version: 10.0.19041.572 Image Version: 10.0.19042.662 [==========================100.0%==========================] No component store corruption detected. The operation completed successfully. C:\Windows\system32>dism /online /cleanup-image /restorehealth Deployment Image Servicing and Management tool Version: 10.0.19041.572 Image Version: 10.0.19042.662 [==========================100.0%==========================] The restore operation completed successfully. The operation completed successfully. C:\Windows\system32>sfc /scannow Beginning system scan. This process will take some time. Beginning verification phase of system scan. Verification 100% complete. Windows Resource Protection did not find any integrity violations. C:\Windows\system32>chkdsk /scan The type of the file system is NTFS. Stage 1: Examining basic file system structure ... 349440 file records processed. File verification completed. Phase duration (File record verification): 2.21 seconds. 5121 large file records processed. Phase duration (Orphan file record recovery): 0.00 milliseconds. 0 bad file records processed. Phase duration (Bad file record checking): 0.62 milliseconds. Stage 2: Examining file name linkage ... 195 reparse records processed. 490074 index entries processed. Index verification completed. Phase duration (Index verification): 6.82 seconds. 0 unindexed files scanned. Phase duration (Orphan reconnection): 260.00 milliseconds. 0 unindexed files recovered to lost and found. Phase duration (Orphan recovery to lost and found): 0.65 milliseconds. 195 reparse records processed. Phase duration (Reparse point and Object ID verification): 2.40 milliseconds. Stage 3: Examining security descriptors ... Security descriptor verification completed. Phase duration (Security descriptor verification): 42.86 milliseconds. 70318 data files processed. Phase duration (Data attribute verification): 1.22 milliseconds. CHKDSK is verifying Usn Journal... 35254488 USN bytes processed. Usn Journal verification completed. Phase duration (USN journal verification): 94.95 milliseconds. Windows has scanned the file system and found no problems. No further action is required. 487755746 KB total disk space. 230597904 KB in 272505 files. 165684 KB in 70319 indexes. 0 KB in bad sectors. 468162 KB in use by the system. 65536 KB occupied by the log file. 256523996 KB available on disk. 4096 bytes in each allocation unit. 121938936 total allocation units on disk. 64130999 allocation units available on disk. Total duration: 9.45 seconds (9453 ms). C:\Windows\system32>wmic recoveros get autoreboot AutoReboot TRUE C:\Windows\system32>wmic recoveros set autoreboot = false Updating property(s) of '\\REAC-5\ROOT\CIMV2:Win32_OSRecoveryConfiguration.Name="Microsoft Windows 10 Education|C:\\Windows|\\Device\\Harddisk0\\Partition3"' Property(s) update successful. C:\Windows\system32>wmic recoveros get autoreboot AutoReboot FALSE C:\Windows\system32>wmic recoveros get DebugInfoType DebugInfoType 1 C:\Windows\system32>wmic recoveros set DebugInfoType = 7 Updating property(s) of '\\REAC-5\ROOT\CIMV2:Win32_OSRecoveryConfiguration.Name="Microsoft Windows 10 Education|C:\\Windows|\\Device\\Harddisk0\\Partition3"' Property(s) update successful. C:\Windows\system32>wmic recoveros get DebugInfoType DebugInfoType 7 C:\Windows\system32>wmic pagefile list /format:list AllocatedBaseSize=17408 CurrentUsage=0 Description=C:\pagefile.sys InstallDate=20201130152618.455084-420 Name=C:\pagefile.sys PeakUsage=1 Status= TempPageFile=FALSE C:\Windows\system32>wmic Computersystem where name="REAC-5" get AutomaticManagedPagefile AutomaticManagedPagefile TRUE C:\Windows\system32>wmic Computersystem where name="REAC-5" set AutomaticManagedPagefile=True Updating property(s) of '\\REAC-5\ROOT\CIMV2:Win32_ComputerSystem.Name="REAC-5"' Property(s) update successful. C:\Windows\system32>wmic Computersystem where name="REAC-5" get AutomaticManagedPagefile AutomaticManagedPagefile TRUE C:\Windows\system32>bcdedit /enum {badmemory} RAM Defects ----------- identifier {badmemory} Press any key to continue . . .
Just got a REFERENCE_BY_POINTER error, uploading the log. Was running HDTune error test, and it had just completed. No errors, will try to get the picture from a second run...
From a second run.
Attachment 309537