Hi people, Ive been getting these BSOD lately, but cant exactly remember the error message, its possible its been different every time though.
Anyways, logs attached if someone kindly has the time to go through them. :) ive also reset the overclocked ram from 3600mhz to 3200mhz
Microsoft OneDrive - Access files anywhere. Create docs with free Office Online.
If you suspect a RAM problem, good to run MemTest86+ at least 8 times.
Please post a share link for: C:\windows\memory.dmp
Code:LastWriteTime Size (MB) FullName ------------- --------- -------- 29/10/2020 8:34:25 AM 1579.25 C:\Windows\MEMORY.DMP
thanks, Ill try tonight. should i run it overclocked (XMP?) or normal? bit of a novice of these things.
- - - Updated - - -
hi, thanks for replying/looking.
heres the share link Microsoft OneDrive - Access files anywhere. Create docs with free Office Online.
Hi Groggubus,
Please run: Tuneup.bat - Click here to go to the BSOD batch repository to download and run this batch file.
Please perform the following steps:
1) In the left lower corner search type: system or system control > open system control panel > on the left pane click advanced system settings
a) > on the advanced tab under startup and recovery > click settings > post an image of the startup and recovery window into the thread
b) > on the advanced tab under performance > click on settings > on the performance options window > click on the advanced tab > under virtual memory > click on change > post an image of the virtual memory window into the thread
2) Uninstall and reinstall:
Netwtw10.sys
Intel(R) Wi-Fi 6 AX200 160MHz
Download Intel(R) Driver & Support Assistant
3) The BIOS Version/Date American Megatrends Inc. 1.00, 11/04/2020
Upgrade the BIOS: 1 > 7C84v13
Motherboard - The world leader in motherboard design | MSI Global
Version
7C84v13
Release Date
2020-09-07
File Size
18.3 MB
4) Turn off Windows fast startup:
Turn On or Off Fast Startup in Windows 10
5) When available post results for tuneup.bat in post # 7.
Code:Netwtw10 ___ Intel(R) Wireless ___ Intel(R) Wireless Kernel Manual Stopped OK FALSE FALSE 2,760,704 3,854,336 0 8/07/2020 7:25:07 PM C:\Windows\system32\drivers\Netwtw10.sys 8,192
Code:Name [00000002] Intel(R) Wi-Fi 6 AX200 160MHz Adapter Type Ethernet 802.3 Product Type Intel(R) Wi-Fi 6 AX200 160MHz Installed Yes PNP Device ID PCI\VEN_8086&DEV_2723&SUBSYS_00848086&REV_1A\6&2E475EF&0&0030000A Last Reset 29/10/2020 9:55 AM Index 2 Service Name Netwtw10. IP Address 192.168.86.227, fe80::3df6:37c3:c2ac:33ec IP Subnet 255.255.255.0, 64 Default IP Gateway 192.168.86.1 DHCP Enabled Yes DHCP Server 192.168.86.1 DHCP Lease Expires 30/10/2020 9:55 AM DHCP Lease Obtained 29/10/2020 9:55 AM MAC Address 74:D8:3E:F4:14:F1 Memory Address 0xF76FC000-0xF76FFFFF IRQ Channel IRQ 4294967252 IRQ Channel IRQ 4294967251 Driver C:\WINDOWS\SYSTEM32\DRIVERS\NETWTW10.SYS (21.110.1.1, 7.50 MB (7,865,696 bytes), 9/07/2020 11:20 AM)
Code:netwtw10 ___ Intel(R) Wireless Adapter Driver for Windows 10 - 64 Bit c:\windows\system32\drivers\netwtw10.sys Kernel Driver No Manual Stopped OK Normal No No
Code:28/10/2020 7:19 AM Windows Error Reporting Fault bucket 0x133_DPC_Netwtw10!prvMemAllocFromLookasideEntry, type 0 Event Name: BlueScreen Response: Not available Cab Id: 0 Problem signature: P1: 133 P2: 0 P3: 501 P4: 500 P5: fffff80307efb320 P6: 10_0_19041 P7: 0_0 P8: 256_1 P9: P10: Attached files: \\?\C:\Windows\Minidump\102820-12953-01.dmp \\?\C:\Windows\TEMP\WER-27031-0.sysdata.xml \\?\C:\Windows\MEMORY.DMP \\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER7C44.tmp.WERInternalMetadata.xml \\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER7C45.tmp.xml \\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER7C63.tmp.csv \\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER7C93.tmp.txt \\?\C:\Windows\Temp\WER5B49.tmp.WERDataCollectionStatus.txt These files may be available here: \\?\C:\ProgramData\Microsoft\Windows\WER\ReportArchive\Kernel_133_21ff25157cde91610b0dfc9b7af3568eb87ff93_00000000_cab_051b2d56-5f3e-4f2f-bb9e-e785d57caf88 Analysis symbol: Rechecking for solution: 0 Report Id: 99f5361c-bbba-4667-89c2-38118889f1b7 Report Status: 268435942 Hashed bucket: Cab Guid: 0 28/10/2020 7:18 AM Windows Error Reporting Fault bucket 0x133_DPC_Netwtw10!prvMemAllocFromLookasideEntry, type 0 Event Name: BlueScreen Response: Not available Cab Id: 667cbabf-97bf-4e4a-8b64-df5b219dfcb6 Problem signature: P1: 133 P2: 0 P3: 501 P4: 500 P5: fffff80307efb320 P6: 10_0_19041 P7: 0_0 P8: 256_1 P9: P10: Attached files: \\?\C:\Windows\Minidump\102820-12953-01.dmp \\?\C:\Windows\TEMP\WER-27031-0.sysdata.xml \\?\C:\Windows\MEMORY.DMP \\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER7C44.tmp.WERInternalMetadata.xml \\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER7C45.tmp.xml \\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER7C63.tmp.csv \\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER7C93.tmp.txt \\?\C:\Windows\Temp\WER5B49.tmp.WERDataCollectionStatus.txt These files may be available here: \\?\C:\ProgramData\Microsoft\Windows\WER\ReportQueue\Kernel_133_21ff25157cde91610b0dfc9b7af3568eb87ff93_00000000_cab_051b2d56-5f3e-4f2f-bb9e-e785d57caf88 Analysis symbol: Rechecking for solution: 0 Report Id: 99f5361c-bbba-4667-89c2-38118889f1b7 Report Status: 484 Hashed bucket: Cab Guid: 0 28/10/2020 7:13 AM Windows Error Reporting Fault bucket AV_Netwtw10!osal::CCmdTask::CCmdTask, type 0 Event Name: BlueScreen Response: Not available Cab Id: b9c6a043-baf3-42ee-b6f9-09d9b0f610ce Problem signature: P1: 1000007e P2: ffffffffc0000005 P3: fffff8027e2edb9b P4: ffff8e077f32d3b8 P5: ffff8e077f32cbf0 P6: 10_0_19041 P7: 0_0 P8: 256_1 P9: P10: Attached files: \\?\C:\Windows\Minidump\102820-11312-01.dmp \\?\C:\Windows\TEMP\WER-13734-0.sysdata.xml \\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER3FC8.tmp.WERInternalMetadata.xml \\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER3FD8.tmp.xml \\?\C:\Windows\Temp\WER4BC5.tmp.WERDataCollectionStatus.txt These files may be available here: \\?\C:\ProgramData\Microsoft\Windows\WER\ReportArchive\Kernel_1000007e_5d3a95747342920f713db5996c873c3ca38a14_00000000_cab_126fee42-dddc-4677-a3bd-b08ed50dc6c5 Analysis symbol: Rechecking for solution: 0 Report Id: a31ca404-8516-40f3-9a3e-7805bb6f9b7c Report Status: 268435556 Hashed bucket: Cab Guid: 0
sorry i stuffed that 1st attempt up.Code:########################################################### # The following commands will be run in sequence. # # The first 5 will take quite a while to run, be patient. # ########################################################### sfc /scannow dism /online /cleanup-image /scanhealth dism /online /cleanup-image /restorehealth sfc /scannow chkdsk /scan wmic recoveros get autoreboot wmic recoveros set autoreboot = false wmic recoveros get autoreboot wmic recoveros get DebugInfoType wmic recoveros set DebugInfoType = 7 wmic recoveros get DebugInfoType wmic pagefile list /format:list wmic Computersystem where name="DAVID" get AutomaticManagedPagefile wmic Computersystem where name="DAVID" set AutomaticManagedPagefile=True wmic Computersystem where name="DAVID" get AutomaticManagedPagefile bcdedit /enum {badmemory} C:\Windows\system32>sfc /scannow Beginning system scan. This process will take some time. Beginning verification phase of system scan. Verification 100% complete. Windows Resource Protection did not find any integrity violations. C:\Windows\system32>dism /online /cleanup-image /scanhealth Deployment Image Servicing and Management tool Version: 10.0.19041.572 Image Version: 10.0.19041.572 [==========================100.0%==========================] No component store corruption detected. The operation completed successfully. C:\Windows\system32>dism /online /cleanup-image /restorehealth Deployment Image Servicing and Management tool Version: 10.0.19041.572 Image Version: 10.0.19041.572 [==========================100.0%==========================] The restore operation completed successfully. The operation completed successfully. C:\Windows\system32>sfc /scannow Beginning system scan. This process will take some time. Beginning verification phase of system scan. Verification 100% complete. Windows Resource Protection did not find any integrity violations. C:\Windows\system32>chkdsk /scan The type of the file system is NTFS. Stage 1: Examining basic file system structure ... 870656 file records processed. File verification completed. Phase duration (File record verification): 5.27 seconds. 10717 large file records processed. Phase duration (Orphan file record recovery): 0.00 milliseconds. 0 bad file records processed. Phase duration (Bad file record checking): 0.33 milliseconds. Stage 2: Examining file name linkage ... 14382 reparse records processed. 1071676 index entries processed. Index verification completed. Phase duration (Index verification): 15.28 seconds. 0 unindexed files scanned. Phase duration (Orphan reconnection): 1.19 seconds. 0 unindexed files recovered to lost and found. Phase duration (Orphan recovery to lost and found): 0.26 milliseconds. 14382 reparse records processed. Phase duration (Reparse point and Object ID verification): 33.59 milliseconds. Stage 3: Examining security descriptors ... Security descriptor verification completed. Phase duration (Security descriptor verification): 36.00 milliseconds. 100511 data files processed. Phase duration (Data attribute verification): 0.33 milliseconds. CHKDSK is verifying Usn Journal... 38673424 USN bytes processed. Usn Journal verification completed. Phase duration (USN journal verification): 82.22 milliseconds. Windows has scanned the file system and found no problems. No further action is required. 999565370 KB total disk space. 828382188 KB in 456463 files. 301316 KB in 100512 indexes. 0 KB in bad sectors. 1009330 KB in use by the system. 65536 KB occupied by the log file. 169872536 KB available on disk. 4096 bytes in each allocation unit. 249891342 total allocation units on disk. 42468134 allocation units available on disk. Total duration: 21.91 seconds (21919 ms). C:\Windows\system32>wmic recoveros get autoreboot AutoReboot FALSE C:\Windows\system32>wmic recoveros set autoreboot = false Updating property(s) of '\\DAVID\ROOT\CIMV2:Win32_OSRecoveryConfiguration.Name="Microsoft Windows 10 Pro|C:\\Windows|\\Device\\Harddisk5\\Partition3"' Property(s) update successful. C:\Windows\system32>wmic recoveros get autoreboot AutoReboot FALSE C:\Windows\system32>wmic recoveros get DebugInfoType DebugInfoType 7 C:\Windows\system32>wmic recoveros set DebugInfoType = 7 Updating property(s) of '\\DAVID\ROOT\CIMV2:Win32_OSRecoveryConfiguration.Name="Microsoft Windows 10 Pro|C:\\Windows|\\Device\\Harddisk5\\Partition3"' Property(s) update successful. C:\Windows\system32>wmic recoveros get DebugInfoType DebugInfoType 7 C:\Windows\system32>wmic pagefile list /format:list AllocatedBaseSize=49152 CurrentUsage=195 Description=C:\pagefile.sys InstallDate=20200704123444.348049+660 Name=C:\pagefile.sys PeakUsage=200 Status= TempPageFile=FALSE C:\Windows\system32>wmic Computersystem where name="DAVID" get AutomaticManagedPagefile AutomaticManagedPagefile TRUE C:\Windows\system32>wmic Computersystem where name="DAVID" set AutomaticManagedPagefile=True Updating property(s) of '\\DAVID\ROOT\CIMV2:Win32_ComputerSystem.Name="DAVID"' Property(s) update successful. C:\Windows\system32>wmic Computersystem where name="DAVID" get AutomaticManagedPagefile AutomaticManagedPagefile TRUE C:\Windows\system32>bcdedit /enum {badmemory} RAM Defects ----------- identifier {badmemory} Press any key to continue . . .
ok. all thats been done, took me a while to update the bios, had a bit of trouble with it. thanks for all the help!
And btw, do you think any of this effects the LAN driver? because my ethernet connection keeps dropping, where as my xbox one x stays connected?
1) Open administrative command prompt (ACP) and type or copy and paste:
2) sfc /scannow
3) dism /online /cleanup-image /scanhealth
4) dism /online /cleanup-image /restorehealth
5) sfc /scannow
6) chkdsk /scan
7) wmic recoveros set autoreboot = false
8) wmic recoveros set DebugInfoType = 7
9) wmic recoveros get autoreboot
10) wmic recoveros get DebugInfoType
11) bcdedit /enum {badmemory}
12) When these have completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on edit then copy > paste into the thread
Use this link as needed when posting results:
How to Change Post Editor to Source or WYSIWYG Mode at TenForums.com
Quote