Attachment 300834
Here ya go. Thanks for taking a look! FYI the crash from my last post is still the only one since the RAM tests.
I'm hoping I'll get a few minutes tonight to re-seat the sticks.
Back on the 22nd you show 16GB of ram in the dump in DIMM1 Channel A and DIMM1 Channel B.
Now in RAM.txt it only shows 8GB in DIMM1 CHANNEL B.
So the ram in Channel A is not being seen by the system. Either it's loose or defective, most likely loose.
Re-seat both memory modules as soon as possible.
Thanks! I just re-seated them and confirmed both BIOS and Windows are now seeing both modules.
I'm about 85% confident that BIOS and Windows saw both on the first boot after seating them the last time I had the case open, but there's still that 15%... I'll keep an eye on it and update in another week or sooner if there are problems.
Well it's been about 2 weeks now and no crashes. At this point I'll mark this solved. The machine did run without crashes for a couple months a while back. I won't be surprised if it comes back, but I'll cross my fingers we've got it all worked out now!
Thank you all for your help and expertise! Especially you Ztruker!! Thanks for sticking with me through it all.
Quote