BSOD happening every day now

Page 1 of 2 12 LastLast

  1. Posts : 9
    windows 10
       #1

    BSOD happening every day now


    I started getting this bsod a few weeks ago. Lately the screen is unreadable when everything crashes however before it started doing that I would get WHEA_uncorrectable_error. Any help would be appreciated.

    I've attached the debug folder like the tutorial said.

    I forgot to mention that it mostly crashes at random.
      My Computer


  2. Posts : 1,625
    W7 Pro x64 | W10 IP x64 | Linux Mint VM
       #2

    Well this is a first for me, 0x124s are usually down to harwdare related issues and give no clue as to what which is the case with most of your dumps, but one has shown a driver to blame.

    Code:
    BugCheck 124, {0, ffffe001f7049028, b434a000, 145}
    
    *** WARNING: Unable to verify timestamp for ladfBakerRamd64.sys
    *** ERROR: Module load completed but symbols could not be loaded for ladfBakerRamd64.sys
    Probably caused by : AuthenticAMD
    
    Followup: MachineOwner
    ---------
    
    2: kd> lmvm ladfBakerRamd64
    start             end                 module name
    fffff801`91c90000 fffff801`91ce0500   ladfBakerRamd64 T (no symbols)           
        Loaded symbol image file: ladfBakerRamd64.sys
        Image path: \SystemRoot\system32\DRIVERS\ladfBakerRamd64.sys
        Image name: ladfBakerRamd64.sys
        Timestamp:        Fri Mar 18 21:26:10 2011 (4D83CDF2)
        CheckSum:         0005D184
        ImageSize:        00050500
        Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

    That is for your Logitech G930 headest and as you can see it is quite old. Check here for an updated version, test and report back.
      My Computer


  3. Posts : 9
    windows 10
    Thread Starter
       #3

    Thanks for the help and I installed the new drivers as you said. Fingers crossed no more crashes
      My Computer


  4. Posts : 1,625
    W7 Pro x64 | W10 IP x64 | Linux Mint VM
       #4

    Keep us posted.
      My Computer


  5. Posts : 9
    windows 10
    Thread Starter
       #5

    Was too good to be true.


    It has crashed once or twice in the past day. I've attaching the newest debug and a picture of the blue screen itself. it has crashed 3 times in the past hour as well
    Last edited by Arrav; 13 Aug 2015 at 14:56. Reason: Forgot something
      My Computer


  6. Posts : 1,625
    W7 Pro x64 | W10 IP x64 | Linux Mint VM
       #6

    More 0x124s, standard 0x124s with nothing showing. It's time to test your hardware.




    STOP 0x124 Troubleshooting

    Read carefully before proceeding.



    warning   Warning
    If you're overclocking your system, revert back to stock clocks now.

    Note   Note
    Test the system once the overclock is removed before continuing with the steps outlined below.


    Part One: CPU Stress Test
    Part Two: MemTest86+ RAM Diagnostic
    Part Three: Hard Drive Diagnostics
    Part Four: GPU Stress Test




    ONE

     CPU TEST


    Run Prime95 to stress test your CPU. http://www.sevenforums.com/tutorials...t-prime95.html

    warning   Warning
    Your CPU temperatures will rise quickly while under this stress test. Keep a keen eye on them and abort the test if overheating occurs.





    TWO

     RAM TEST


    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note


    MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.





    THREE

     HDD TEST


    Run SeaTools to check the integrity of your HDD. http://www.sevenforums.com/tutorials...s-how-use.html

    Note   Note
    Do not run SeaTools on an SSD as the results will be invalid.


    Run chkdsk http://www.sevenforums.com/tutorials...isk-check.html




    FOUR

     GPU TEST


    Run Furmark to stress test your GPU. FurMark - GPU Stress Test - Windows 10 Forums

    Note   Note
    Run Furmark for around 30 minutes.
    warning   Warning
    Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if overheating occurs.
      My Computer


  7. Posts : 9
    windows 10
    Thread Starter
       #7

    i have tested my ram,cpu, and gpu so far and this is what I've found

    Ram: the ram was fine it ran 8 passes with no errors.
    Cpu: afer a minute or so into the test the cpu would start overheating so I couldn't run it long enough.
    Gpu: test ran pretty fine for the most part. after some time the program would stop and start up every half second(kinda like it was lagging)
    haven't tested the hdd but i will be doing that tomorrow

    edit: will the pc blue screen if the cpu overheats.
    Last edited by Arrav; 15 Aug 2015 at 17:47.
      My Computer


  8. Posts : 1,625
    W7 Pro x64 | W10 IP x64 | Linux Mint VM
       #8

    Arrav said:
    edit: will the pc blue screen if the cpu overheats.
    Yes, quite possibly. What CPU cooler do you have installed?
      My Computer


  9. Posts : 9
    windows 10
    Thread Starter
       #9

    not sure


    I'm not entirely sure what the cpu cooler is because this is a prebuilt pc. The cpu is a AMD Phenom II X6 1100T if that helps at all.

    also while running speedfan and monitoring the cpu temp so it doesn't get too high it hasn't blue screened
      My Computer


  10. Posts : 1,625
    W7 Pro x64 | W10 IP x64 | Linux Mint VM
       #10

    Can you take a photo of the inside of the PC an dattach it to your next post.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 21:26.
Find Us




Windows 10 Forums