Page 1 of 10 123 ... LastLast
  1.    11 Aug 2015 #1
    Join Date : Aug 2015
    Posts : 48
    Win10Pro

    Kmode exception not handled. fvevol.sys


    Hi,

    Thank you for looking at my problema!

    I migrated to W10pro about a week ago and I must say all went perfectly smooth and well!
    Nothing special until this morning.
    Using Bitlocker on both partitions, startup and data.
    I started up normally, but when unlocking the data disk, on the momento I gave the password en pressed Enter, I was presented with a blue screen telling error:
    Kmode exception not handled. fvevol.sys We must restart your pc to............

    Pc then rebooted, and after a rather long time (2 minutes) with full HD activity it came up again normally.
    When I did the unlocking of data disk, all went well this time.

    So, I really don't know if this was just a one time incident or if I should do something to track the real problema behind and solve it. I would like to be assured it won't como back or worse..

    Thanks for any tips!
      My ComputerSystem Spec
  2.    14 Aug 2015 #2
    Join Date : Aug 2015
    Posts : 48
    Win10Pro
    Thread Starter

    I really am sorry and surprised that nobody has a clue on my problem?!
      My ComputerSystem Spec
  3.    15 Aug 2015 #3
    Join Date : Oct 2013
    Wolves, England
    Posts : 1,634
    W7 Pro x64 | W10 IP x64 | Linux Mint VM

    Then you should have posted here instead of bumping your own thread Waiting for a response? Post here. - Windows 10 Forums

    As for your single dump it's blaming Intel Rapid Storage. If you're not running a RAID setup disable IRST for testing purposes.

    Code:
    ffffd000`22660198  fffff801`aaa83701Unable to load image \SystemRoot\System32\drivers\iaStorA.sys, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for iaStorA.sys
    *** ERROR: Module load completed but symbols could not be loaded for iaStorA.sys
     iaStorA+0x3701
      My ComputerSystem Spec
  4.    15 Aug 2015 #4
    Join Date : Jul 2015
    Posts : 76
    Win10 Pro

    Sorry! This -- NOTE: Please do not create duplicate threads and posts on the same issue. Doing so will only waste your time and the time of other members trying to help. -- led me to believe it was a cardinal sin to create another thread on the same problem.
      My ComputerSystem Spec
  5.    15 Aug 2015 #5
    Join Date : Aug 2015
    Posts : 48
    Win10Pro
    Thread Starter

    Quote Originally Posted by Boozad View Post
    Then you should have posted here instead of bumping your own thread Waiting for a response? Post here. - Windows 10 Forums

    As for your single dump it's blaming Intel Rapid Storage. If you're not running a RAID setup disable IRST for testing purposes.

    Code:
    ffffd000`22660198  fffff801`aaa83701Unable to load image \SystemRoot\System32\drivers\iaStorA.sys, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for iaStorA.sys
    *** ERROR: Module load completed but symbols could not be loaded for iaStorA.sys
     iaStorA+0x3701
    Thank you very much! Both for getting me knowing better the way inside this fórum, as well as your technical tip.
    I have disabled IRST from startup and will see next days if the failure comes back or not.
    What is confirmed (5 times now) that this error occurs always at the same action: Unlocking Bitlocker of my 2nd data HDD.

    I will follow up the info.
      My ComputerSystem Spec
  6.    15 Aug 2015 #6
    Join Date : Oct 2013
    Wolves, England
    Posts : 1,634
    W7 Pro x64 | W10 IP x64 | Linux Mint VM

    Quote Originally Posted by wpcoe View Post
    Sorry! This -- NOTE: Please do not create duplicate threads and posts on the same issue. Doing so will only waste your time and the time of other members trying to help. -- led me to believe it was a cardinal sin to create another thread on the same problem.
    It means do not start multiple threads for your own problem.
      My ComputerSystem Spec
  7.    15 Aug 2015 #7
    Join Date : Oct 2013
    Wolves, England
    Posts : 1,634
    W7 Pro x64 | W10 IP x64 | Linux Mint VM

    Quote Originally Posted by Ron99 View Post
    Thank you very much! Both for getting me knowing better the way inside this fórum, as well as your technical tip.
    I have disabled IRST from startup and will see next days if the failure comes back or not.
    What is confirmed (5 times now) that this error occurs always at the same action: Unlocking Bitlocker of my 2nd data HDD.

    I will follow up the info.
    Keep us posted.
      My ComputerSystem Spec
  8.    19 Aug 2015 #8
    Join Date : Aug 2015
    Posts : 48
    Win10Pro
    Thread Starter

    Kmode exception not handled. fvevol.sys


    Quote Originally Posted by Ron99 View Post
    Thank you very much! Both for getting me knowing better the way inside this fórum, as well as your technical tip.
    I have disabled IRST from startup and will see next days if the failure comes back or not.
    What is confirmed (5 times now) that this error occurs always at the same action: Unlocking Bitlocker of my 2nd data HDD.

    I will follow up the info.
    Disabling RST did not do the trick. Same error again.
    Now I have uninstalled it completely, to see if this helps. Don't know really if I needed it anyway?

    Let's wait and see.
      My ComputerSystem Spec
  9.    27 Aug 2015 #9
    Join Date : Aug 2015
    Posts : 48
    Win10Pro
    Thread Starter

    Still same error


    After some peaceful days, a moment ago, once again, the same error, at the same moment!
    IRST is no longer installed, so some other cause must be present.

    Thank you for more suggestions!

    New logs attached.
      My ComputerSystem Spec
  10.    29 Aug 2015 #10
    Join Date : Aug 2015
    Posts : 48
    Win10Pro
    Thread Starter

    Once more this night. It's getting more frequent!
    Please help!

    New log files attached.
      My ComputerSystem Spec

 
Page 1 of 10 123 ... LastLast


Similar Threads
Thread Forum
boot loop - error code - system thread exception not handled
Hi, i am using windows 10 from 1st of august by upgrading from win7ultimate,thought of clean install at a later time. after a day,the system stuttered while watching videos through vlc,or at youtube(maybe by just by watching), after some days the...
General Support
Help! Windows 10 won't boot ('system thread exception not handled')
Upgraded to Win 10 from 8.1 recently and it was working fine. This morning when I tried to boot it won't. Stays stuck in a 'your PC ran into a problem' loop and shows a 'system thread exception not handled' error. I hadn't got a chance to create...
General Support
Persistent IRQL/KMODE Blue Screens
Hey guys & gals! I need some help diagnosing a few BSODs I've been having. I think the BSODs are driver related because I have ran memtest86+ for 8 passes no errors, as well as chkdisk and seatools with no problems. Yesterday I installed W10TP...
BSOD Crashes and Debugging
How will new feature development be handled with Windows 10?
Microsoft say that Windows 10 will be the final version of Windows. Whether that's true or not, it certainly won't be the end of new features being needed, wanted, and added to Windows 10. That being said, the "feature complete" state of Windows...
General Support
system service exception atikmdag.sys
Hello guys How you doing? I was having win 8.1 but was getting bsod so i updated to win 10 but after updating my ati drivers, am getting the bsod again, sometimes during shut down or sometimes after switching on my laptop Please help as it...
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 20:50.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums