Windows 10: Kmode exception not handled. fvevol.sys

Page 2 of 10 FirstFirst 1234 ... LastLast
  1. axe0's Avatar
    Posts : 13,705
    Windows 10 Pro
       03 Sep 2015 #11

    Hi Ron99,

    Until @Boozad returns I'll try to help you as far as possible.

    Please use the tool again and upload the zip file, in case you have had another BSOD and something of your system has changed.
      My ComputersSystem Spec

  2.    03 Sep 2015 #12

    new logs

    Thank you Axe0!
    See attached.
      My ComputerSystem Spec

  3. axe0's Avatar
    Posts : 13,705
    Windows 10 Pro
       03 Sep 2015 #13

    The cause is again Intel Rapid Storage Technology, you had disabled IRST from startup, but that is not enough.
    Please install IRST again from your manufacturer and disable it from startup.
    After installing IRST again and disabling it from startup please do the following:

    • Search services.msc and open it
    • Search IRST in the services
    • Right click IRST and click properties
    • Change the startup type to manual and click ok

    2: kd> lmvm iastorastart             end                 module name
    fffff800`10b00000 fffff800`10dca000   iaStorA  T (no symbols)           
        Loaded symbol image file: iaStorA.sys
        Image path: \SystemRoot\System32\drivers\iaStorA.sys
        Image name: iaStorA.sys
        Timestamp:        Mon Jul 09 22:42:33 2012 (4FFB4239)
        CheckSum:         000AB20A
        ImageSize:        002CA000
        Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
      My ComputersSystem Spec

  4.    05 Sep 2015 #14

    Ok Axe0: Done as you suggested.
    No waiting for results in the next days.

      My ComputerSystem Spec

  5. axe0's Avatar
    Posts : 13,705
    Windows 10 Pro
       05 Sep 2015 #15

    You're welcome :)

    If you get any new bluescreen, please use to the tool again and upload the zip file
      My ComputersSystem Spec

  6.    06 Sep 2015 #16

    Once again

    Well; I'am sorry to report that it did not last very long, until a new BSOD :-(

    And with Intel "Manual" as suggested:

    Before this, I cleaned up older log files, so it should be rather easy to spot down this time.

    Thanks again!
      My ComputerSystem Spec

  7. axe0's Avatar
    Posts : 13,705
    Windows 10 Pro
       06 Sep 2015 #17

    I see you have installed Driver Genius.
    If you have installed any drivers from a driver update program, remove them and remove this program.

    Software that updates drivers for you are known to cause problems regarding drivers as they install the wrong or corrupted drivers.
    That is why it is not recommended to use them.

    For laptops specific, only install the drivers provided by your manufacturer.
      My ComputersSystem Spec

  8.    06 Sep 2015 #18

    ok, but problema is there are no win10 updates provided by Acer for my latop.
    And last time I used Driver Genious was before upgrading ton Win 10, so I don't know where to start. Also, If I restore by Driver Genious, I will probably mess up Win10 install, no?
      My ComputerSystem Spec

  9. axe0's Avatar
    Posts : 13,705
    Windows 10 Pro
       06 Sep 2015 #19

    The drivers should be compatible with w10 so far I know.
      My ComputersSystem Spec

  10.    06 Sep 2015 #20

    ok. I am travelling now. When back home, I will do a full backup image and then try Rolling back Driver Genius.
    But: Does the logfiles from today blame any special ítems?
      My ComputerSystem Spec

Page 2 of 10 FirstFirst 1234 ... LastLast

Related Threads
Hi, i am using windows 10 from 1st of august by upgrading from win7ultimate,thought of clean install at a later time. after a day,the system stuttered while watching videos through vlc,or at youtube(maybe by just by watching), after some days the...
Upgraded to Win 10 from 8.1 recently and it was working fine. This morning when I tried to boot it won't. Stays stuck in a 'your PC ran into a problem' loop and shows a 'system thread exception not handled' error. I hadn't got a chance to create...
Persistent IRQL/KMODE Blue Screens in BSOD Crashes and Debugging
Hey guys & gals! I need some help diagnosing a few BSODs I've been having. I think the BSODs are driver related because I have ran memtest86+ for 8 passes no errors, as well as chkdisk and seatools with no problems. Yesterday I installed W10TP...
Microsoft say that Windows 10 will be the final version of Windows. Whether that's true or not, it certainly won't be the end of new features being needed, wanted, and added to Windows 10. That being said, the "feature complete" state of Windows...
system service exception atikmdag.sys in BSOD Crashes and Debugging
Hello guys How you doing? I was having win 8.1 but was getting bsod so i updated to win 10 but after updating my ati drivers, am getting the bsod again, sometimes during shut down or sometimes after switching on my laptop Please help as it...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 19:24.
Find Us